This channel really is one of a kind, i havent seen anyone else really go into the process of making completely custom unique parts, AND your doing it in your garage. Thanks for bringing us along with you on the build!
I've been watching you create custom wide body kits since the days of the MR2, it's really interesting to see how your techniques evolve and all the different materials you use. Keep it up Built!
I don't know how this man hasn't been recognised from other automotive youtubers and companies... Damn, the A4, the MR2 and now this?! WOW! I am amazed! And at first glance, the kit kinda had a RWB Porsche vibe to it ahah
I found UA-cam channel Builder Creator a couple of weeks ago... building a supercar from scratch...his composite work is spot on...your MG is gonna be awesome, just gotta hone those skills buddy...
Hi dude. I'm from England, lots of MGB cars on the roads here. You do know there is a wide body kit for this car. Originally the car was an MG Sebring, had a large engine and wide body kit. You can source these easily. I know you like building your own, but check out the sebring kit if you haven't already. Great channel though 👍🏻
I used to be a fibreglass laminator, if you've used epoxy to seal the plug, you don't need PVA, you would be better with about seven coats of wax, and don't buff the last coat of wax off, it'll separate easier. And I would have applied a thicker gel coat, but what you've got will be perfectly good enough. Honey wax works the best in my experience.
Looking really cool, can't wait to see the finished result, but on the same time I really enjoy watching the progress too. I wish I had the time and, knowledge and somewhere to stand for an own project.
When it comes to propane heaters, they're actually really safe as long as you don't knock them over. I used to work at a propane heated shop, never had any breathing problems or anything. If you're concerned about it you can install a Carbon Monoxide detector into your garage for extra safety, but I worked in that shop for 8 months, wasn't ever an issue
If you have cold ambient and one random piece(s), put some small electric heater below the piece and plastic over the piece. Or two layers of plastic, or three.
I've had some carpal tunnel and did a bit of online looking and sleeping with the wrist guard is a real big help. Did it for 2 weeks straight and now only need to do it one night when wrist starts to play up again
I hope You keep those molds and start making this kit for other Mgb’s You would make a fortune I would even buy a kit from you for my Mgb You are very talented
Awesome job dude! That would have been a massive amount of work to do. I helped make 3 fibreglass canoes years ago, it was effort, and they only have simple shapes and it doesn't matter about the finish as long as it keeps water out. So yeah, lots of respect to you! (Also thanks for converting the temp from F to C for some of us)
Just found this on UA-cam. I'm in the UK really enjoying the Channel while in lockdown. You come across really well and with have ago attitude. Keep up the good work and I have subscribed
I KNOW RIGHT! I'm stoked to have sponsors like Raid. They are super easy to work with and the game is free and legitimately good so its easy to promote. More than that I'm stoked you guys are excited about me having ads. I think it's easy to forget that ads pay for content. This video cost me over $500 to produce so the ads help me offset that cost and keep this channel running. Thanks for watching/supporting the channel Sabastian!
Yeeeah now episode! Thank you for your answers on Instagram I was so happy! I was looking forward to this new chapter of the wide body! Learning a lot for my diy wing for my wagon
This is amazing. Good job, the wing idea scares me for obvious reasons but do what makes you happy. Regardless im enjoying all the content bringing new life into older cars.
@@BUILTOFFICIAL why not use a honda engine? Small, light, readily available, relatively easy to work on, good cheap parts, can make a lot of power with a turbo, and the most important of all VTEC
@@Pandadancypant this is the way to go s2000 swap is really easy in an mg b you just need custom mounts and modify the front crossmember to clear the sump tge rest is just ecu and loom then boom 220bhp in an mg which is perfect then boost if you can handle it 😈
You have already done these parts but o would suggest to use a little bit off heat when removing the parts from the mold, just to soften the vaseline 🤷♂️👌🏻, love the build by the way🔥🔥🔥🔥
Love the work your doing. Turning out great. In my opinion the squareness of the main section of front bumper is a tad bit blocky and I would round it off a bit. But it’s not my build so keep on keeping on my dude. Love your builds.
When you get the mgb project done, i wanna cruise with you so bad. Im from mississippi and have a 350z im gonna start making into a show car/night runner. Itd be so fun.
Epic video!!! Car is looking awesome. Been watching since MR2 build and I would start pushing your own merc and make sure you ask ppl to like share and subscribe. We know its not your way but you've got 284k viewers that you can help you grow even more with some purchases 💰💰.
cool what part of alabama i live in florida. would be cool to have you come hang out when i start on my 1965 galaxie 500 2 door hard top. going to build the entire body out of fiberglass and wide body it.
man 30 degrees would feel like a heatwave to me as it's been in the low teens here in the Upper Peninsula of Michigan lol. Why is it so difficult for you to separate those molds are you not putting enough mold release on them (if you're putting any on at all)?
If you have "man" hands it doesnt bother you.. like calisted hands from working on cars, climbing, swinging hammers.. basically just use your hands alot.. but if you have soft hands from working on a computer all day or something then its gonna be a problem for ya.. but that's prob how it doesnt bother him, same with hot stuff you really dont feel it that much until it's stupid hot... just saying
@@chalupamsf not saying super "thick" just more or less rough skin... like would take a razor blade to cut thru it lol... but idk what to tell ya buddy, I know back in my early teenage years my right had stayed smooth from all the lotion I put on it... lol
Heh bud,love the work,gonna look real good with the porsche parts,wide body....what colour you thought of, matt black all over would look mean as,or maybe tan and black fenders,wide body.....tinted windows,yellow front lights,built official sticker black across top front window....... Keep up the goodness. Peace....
Thanks man! I'm stoked on the look too! I'm going to have to save up a bit for the swap on this one so once the kit gets done on this car I'm going to swap over to the datsun wide body kit to save some money up for the engine swap in the mg. I'll also be working on the overland truck during that time as well. We HAVE been working on the datsun in the background but it's been boring stuff to watch. The wiring harness is done, the brake lines are almost done, we are redoing the fuel system, and the bed is back on
No hate, i love the channel and your content but when this project is done maybe do a little garage makeover, you could even make a video about it hell i’d watch that shit!
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/zcb7Bc and get a special starter pack 💥 Available only for the next 30 days
yikes
Raid Shitshow Legends :) Its ok i skip sponsor bits anyway .
Good to see you getting the sponsors. Helps support the channel 👍
@@DerAngeloMerte man is just trying to feed his family bro
I'm in.. Playing like crazy
This channel is so amazing. I love how you really seem to use tools anyone can get their hands on.
That's what's its all about man! I never thought it would be possible to make parts like this in a garage but it's totally doable
Glad that heater did so much for you!! Thanks for the shoutout!!!! I just knew it would be more beneficial for you than me!
This is going to be insane!
Youre one of the only channels who make car BUILDS! and not just putting expensive parts on expensive cars.
Love it!
I know it's been a few years, but I just got a Sebring kit for my MGB roadster these videos are a huge help and inspiration!
This channel really is one of a kind, i havent seen anyone else really go into the process of making completely custom unique parts, AND your doing it in your garage. Thanks for bringing us along with you on the build!
I found one other channel with same idea....although the guy's a bit older, supercar from home garage, using basic tools...Builder Creator...
I've been watching you create custom wide body kits since the days of the MR2, it's really interesting to see how your techniques evolve and all the different materials you use. Keep it up Built!
Ohhh man I'm so glad you got advice from builder creator! I've been recommending him to you for a while. That old man is awesome!
I don't know how this man hasn't been recognised from other automotive youtubers and companies... Damn, the A4, the MR2 and now this?! WOW! I am amazed! And at first glance, the kit kinda had a RWB Porsche vibe to it ahah
I found UA-cam channel Builder Creator a couple of weeks ago... building a supercar from scratch...his composite work is spot on...your MG is gonna be awesome, just gotta hone those skills buddy...
Hi dude. I'm from England, lots of MGB cars on the roads here. You do know there is a wide body kit for this car. Originally the car was an MG Sebring, had a large engine and wide body kit. You can source these easily. I know you like building your own, but check out the sebring kit if you haven't already. Great channel though 👍🏻
Its doesnt have as extreme dimensions as hes trying to achieve. He tries to build something similar to the Porsche RWB.
My jaw drops everytime I see a new built video, you’re videos literally make my day
I used to be a fibreglass laminator, if you've used epoxy to seal the plug, you don't need PVA, you would be better with about seven coats of wax, and don't buff the last coat of wax off, it'll separate easier.
And I would have applied a thicker gel coat, but what you've got will be perfectly good enough.
Honey wax works the best in my experience.
Super skilled work on that bumper. Will look awesome when finished. 👍🏽😎
Looking really cool, can't wait to see the finished result, but on the same time I really enjoy watching the progress too. I wish I had the time and, knowledge and somewhere to stand for an own project.
When it comes to propane heaters, they're actually really safe as long as you don't knock them over. I used to work at a propane heated shop, never had any breathing problems or anything. If you're concerned about it you can install a Carbon Monoxide detector into your garage for extra safety, but I worked in that shop for 8 months, wasn't ever an issue
Brother it's looking great I've watched from the start of this build...proud of your achievement...👍👍👍🇿🇦🇿🇦🇿🇦
Doing great cant wait for more!
Side note be sure to vent your work space with that space heater running!
A carbon fiber hood with hood scoop would look amazing. Loving this build
If you have cold ambient and one random piece(s), put some small electric heater below the piece and plastic over the piece. Or two layers of plastic, or three.
I've had some carpal tunnel and did a bit of online looking and sleeping with the wrist guard is a real big help. Did it for 2 weeks straight and now only need to do it one night when wrist starts to play up again
Watching all the new vids with my Sick "Glitch Built Bunnyhug" keeps me warm in Canada also lmao. Thanks dude for the vids!
I set my cheaper/ thicker resin in a pot of hot water before I'm going to use it.... helps thin/ loosen how it flows!
I hope You keep those molds and start making this kit for other Mgb’s
You would make a fortune
I would even buy a kit from you for my Mgb
You are very talented
Aaand he is at it again 😁. Can't wait to see how all the hard work on the one off bodykit will turn out!💪
Awesome job dude! That would have been a massive amount of work to do. I helped make 3 fibreglass canoes years ago, it was effort, and they only have simple shapes and it doesn't matter about the finish as long as it keeps water out.
So yeah, lots of respect to you!
(Also thanks for converting the temp from F to C for some of us)
Just found this on UA-cam. I'm in the UK really enjoying the Channel while in lockdown. You come across really well and with have ago attitude. Keep up the good work and I have subscribed
Finally BUILT gets some high budget sponsors... I normally dont like Raid ads, but i am stoked they sponsor Built!
I KNOW RIGHT! I'm stoked to have sponsors like Raid. They are super easy to work with and the game is free and legitimately good so its easy to promote. More than that I'm stoked you guys are excited about me having ads. I think it's easy to forget that ads pay for content. This video cost me over $500 to produce so the ads help me offset that cost and keep this channel running. Thanks for watching/supporting the channel Sabastian!
I can't wait to see this beauty when it's all sanded and painted up!
awesome work Caleb. your skills have certainly improved and got better. keep it up and dont loose faith in yourself
"Freezing Rain" We call it Hail Stone's in Ireland 🇮🇪😁 took me a minute to figure that out 😂. Loving this build, keep doing what your doing 😁👍
I hear your plan, I understand your build, I still see it. I'll have to wait for it to come together a little more
With a porshe 934 bumper woud look stunning!
Coming along nicely will look sick when its completed
Yeeeah now episode! Thank you for your answers on Instagram I was so happy! I was looking forward to this new chapter of the wide body! Learning a lot for my diy wing for my wagon
This is amazing. Good job, the wing idea scares me for obvious reasons but do what makes you happy. Regardless im enjoying all the content bringing new life into older cars.
Excited to see the finished product!...lookin Schweet!
This build is looking so awesome, cant wait to see it finished.
Looking good, respect for never giving up, it’s paying back! 👍🏻
Well, well, well worth the wait man. Absolutely incredible work. You're an inspiration to garage modders like myself.
I always limited my self not because of lack of skill but lack of expensive tools this channel proved me wrong
11:11 has that old school BUILT sound! Like we’re wide-bodying the MR2 again, or making cheap wheels look good!
What about a Porsche swapped MGB
Me and german engines don't have a good history lol
@@BUILTOFFICIAL ha I can relate but it would be sick
@@BUILTOFFICIAL why not use a honda engine? Small, light, readily available, relatively easy to work on, good cheap parts, can make a lot of power with a turbo, and the most important of all VTEC
It would envolve quite a bit of fabrication to fit a boxer motor. It would definitely lower the center of gravity though
@@Pandadancypant this is the way to go s2000 swap is really easy in an mg b you just need custom mounts and modify the front crossmember to clear the sump tge rest is just ecu and loom then boom 220bhp in an mg which is perfect then boost if you can handle it 😈
I love watching this process and i am so ready to see the finished product!!! Your awesome bro!!!
Looks soo good man I'm happy for you. I'm sure you are stoked with this
The amount of patience you have is crazy 👏
You have already done these parts but o would suggest to use a little bit off heat when removing the parts from the mold, just to soften the vaseline 🤷♂️👌🏻, love the build by the way🔥🔥🔥🔥
Broooooooo loookkkksssss sick can't wait to be done and painted🔥🔥💪🏻💪🏻
You are extremely underrated hope that changes soon because you deserve it
I don't know if you've seen it, but Throttle Stop Garage has a great video series where he makes a lot of molds and does CF.
I've enjoyed following this build. You've prob. covered it, but what's the yellow station wagon in the background?
Love the work your doing. Turning out great. In my opinion the squareness of the main section of front bumper is a tad bit blocky and I would round it off a bit. But it’s not my build so keep on keeping on my dude. Love your builds.
Nsxt mold blanck every hole and wax any corner and bend and put flanges on it it will help to not destroy or dammage original mold
When you get the mgb project done, i wanna cruise with you so bad. Im from mississippi and have a 350z im gonna start making into a show car/night runner. Itd be so fun.
Amazing build, fantastic work and great content! Love your enthusiasm; can't wait for the next video
I was going to say this is a big step...but with the AWESOME content you put out, every step is a big one!
If you run a heater like that, you should have a monoxide detector in there for safety
The real men don't need monoxide detector. :)
@@ojarsbulte6981 yeah, only real men die from carbon monoxide poisoning :)
Think your doing a great job for a young dude just learning as you go. I'd of made the head light surrounds more tapered an Sharpe at the ends
Love the content!!! Keep it going brother!! I know it’s your passion!!
Epic video!!! Car is looking awesome. Been watching since MR2 build and I would start pushing your own merc and make sure you ask ppl to like share and subscribe. We know its not your way but you've got 284k viewers that you can help you grow even more with some purchases 💰💰.
Keep grinding man, you're getting better. Success is a process that takes time, keep going and you'll get there.
cool what part of alabama i live in florida. would be cool to have you come hang out when i start on my 1965 galaxie 500 2 door hard top. going to build the entire body out of fiberglass and wide body it.
man 30 degrees would feel like a heatwave to me as it's been in the low teens here in the Upper Peninsula of Michigan lol. Why is it so difficult for you to separate those molds are you not putting enough mold release on them (if you're putting any on at all)?
Could you use compressed air to separate the pieces?
Finally been waiting for this video
It's going to look sick! Possibly a new fav?
Nice one mate, good job, it's looking amazing.
Top job, well worth the effort.
anyone elses hands start itching real bad while watching him lay the glass bare handed?
he is simply built different
If you have "man" hands it doesnt bother you.. like calisted hands from working on cars, climbing, swinging hammers.. basically just use your hands alot.. but if you have soft hands from working on a computer all day or something then its gonna be a problem for ya.. but that's prob how it doesnt bother him, same with hot stuff you really dont feel it that much until it's stupid hot... just saying
@@slimwilly573 crazy, I work on cars and build trailers, yet my hands aren’t super thick with callous🤔
@@chalupamsf not saying super "thick" just more or less rough skin... like would take a razor blade to cut thru it lol... but idk what to tell ya buddy, I know back in my early teenage years my right had stayed smooth from all the lotion I put on it... lol
OM606 diesel motor would be fucking sick
Heh bud,love the work,gonna look real good with the porsche parts,wide body....what colour you thought of, matt black all over would look mean as,or maybe tan and black fenders,wide body.....tinted windows,yellow front lights,built official sticker black across top front window.......
Keep up the goodness.
Peace....
What breathing mask were you using when applying those coats?
This car really deserves an SR20 engine
Anyone notice the rounded off bangs lol....just buggin keep up the entertaining vids buds
As you complained about the temperature problem, ElectroBoom made two videos about a ceiling heater, which could be definitely useful for you😅
m.ua-cam.com/video/yGAJDhl11ZE/v-deo.html
I can't wait to see the datsun wide body kit. Im interested in it for my datsun.
Ooh this is going to look sick I love this build also when do you think the datsun or the overland truck will be started again
Thanks man! I'm stoked on the look too! I'm going to have to save up a bit for the swap on this one so once the kit gets done on this car I'm going to swap over to the datsun wide body kit to save some money up for the engine swap in the mg. I'll also be working on the overland truck during that time as well. We HAVE been working on the datsun in the background but it's been boring stuff to watch. The wiring harness is done, the brake lines are almost done, we are redoing the fuel system, and the bed is back on
@@BUILTOFFICIAL that's nice maybe you should set up one of those go fund me things to get a little pocket change if you need it
Downloaded it just for the support too u 💪🏻💪🏻
ur good broski...... it's propane.... it burns fairly clean.... I've run them in a house b4(no heat available atm) u should be completely fine.
2:40 video starts. Your welcome
What is your respirator hooked up too?
There’s no danger using that propane heater. We use one in my house when it gets cold. You’re fine sitting next to it for hours
I really hope you're joking.
Honestly would love to see a British engine in a British car, or at the very least a Euro engine.
Yes finally
I KNOW!! it looks like a car again.. a cool car😎😎😎
No hate, i love the channel and your content but when this project is done maybe do a little garage makeover, you could even make a video about it hell i’d watch that shit!
Looks good dude
Looks great good job 👏
What is the respirator system that you use???
Just put a carbon monoxide detector in there and you’ll be fine using the heater if it doesnt sound the alarm
Gonna look awesome
So cool!!!
I'm inspired thanks
unplug whith some water
You know you have made it as a youtuber if you are sponsored by Raid Shadow Legends!!
Proper video starts at 2:40.
Finally you're a real UA-camr XD
Wow that's alot of man hours 😄👌🏼 but you got it done so far 👍
Nice work
Pay the Man UA-cam ,✌🏼💚😷
Try Aluminum tape. Much stronger