Lucas O'Rourke i will be posting a clutch install video soon. Watch that and let me know if that is more of what you are looking for. Its got music and voice over but I want to know everyones thoughts on that.
Jim Pinckard it’s not like he is putting that much power into it. And if you don’t have something nice to say then don’t say it. It is his project not yours so let him make it how he wants
Its a honda gx200 governor removed with ebay torque converter. If you want to go cheaper get a predator 212. Had that before and it worked great with a governor bypass
Marc Zantinge for a gokart i recomend a honda 390 (or get a clone they work just as well) my gokart is running a ptm420(and whats the matter with you guys and torque converters
He didnt explain it to well there, yes he is correct but not complete with what he told you. Its called a welding cable, and due to the fact that its an arc welder it takes alot of voltage and a lot of amps through it, so they use a low gage high current copper cable and a high current copper aligator clamp, much like that of a jumper cable, which is used to connect two cars main power circuits together which may be only 12 to 24 volts, but need a hell of a lot of amperage to turn over (spin the fly wheel that turns the crank shaft which moves everything in the engine to start the rotations in which are required for the engine to run, if interested in knowing more look upna video about how an engine works) the engine. So anything thin and weak would melt. Hope this helps your curiosity!
Got it from ebay. Its a pain cause shipping is $95 tho. Should be well worth it. It was a pain to figure out all the wiring and clutch but its all fixed up. Got a new fuel pump coming this week so I should be riding this weekend!
Awesome! Did you find a wiring harness online? Or did you make one? If so, what wiring schematic did you make it off of? I was thinking when I make mine I would put the clutch on the steering wheel using a bike brake.... just an idea to toss around. Thanks for the info!
The wiring harness comes with the 200cc lifan - set kit, so i used that but modified it by moving 2 wires to different ports and changing around one more wire to get it to work. I can make a video on the wiring if needed.
That would be so great if you could do that! It would be a lot less time that I would need to spend trying to figure out how to get the whole wiring system to work
Hey J P I am gathering the supplies now to do a frame. If you wouldn’t mind sharing a few details on the build of your frame I would truly appreciate it big man. I don’t know how to get you my email without having trolls all on it. So if you know a way to privately get you I will send you a sheet of dimensions I am needing. If not no skin off my back. I get it u probably get all sorts of silly shit asked of you already. Love what you do keep it up
Just bought a gsxr 750 motor, im thinking about doing a build series for a shifter cart. Anyone interested in watching that?
Don Q Mercy yes!
extremely
Brandon S hell yea
Hell yeal do it bro
Brandon S yup
4:46 holy shit that was awesome 😂😂 had to rewatch that 😃😃
Pepe Daily same I watched that 4 times
Dertzey LOL me too😂😂
Sweet build man! I'll definitely have to check out the other videos in this build series!
Wow! It's amazing that you have the ability to do all of that! Good job!
Talk about what you're doing it's more interesting then your edm playlist but other then that loved the video keep it up!
Lucas O'Rourke i will be posting a clutch install video soon. Watch that and let me know if that is more of what you are looking for. Its got music and voice over but I want to know everyones thoughts on that.
hey man can you tell what go kart that is?
You need a work bench my man.
seriously. building a work bench would go a long way to making building a lot easier.
Awsome go kart man. Use a 6 speed 2 stroke 125cc engine from honda/suzuki/kawasaki/yamaha or ktm
We call that super kart
Normally the clutch goes on the steering wheel column on those shift karts...
Well, he can have his stick shift wherever he wanna, but normally the CLUTCH, the C L U T C H is on the steering wheel columm....
Why does it matter??
Not on mine
Safety pins and zip ties...........never a good idea on something like that.
Jim Pinckard it’s not like he is putting that much power into it. And if you don’t have something nice to say then don’t say it. It is his project not yours so let him make it how he wants
Never
Anonymous Person he was just looking out for his kart ... and his safety
4:50 mad ting
has a go cart and a mini cooper what a G
Good shit boii! Keep it up! I wanna see more builds!
kid is high as hell I like him and gave the video of thumbs up
Congrats on 400 bud
TUBULR ilk
I would probably have tried to find a small ATV trans to go on that motor, that way you get a reverse gear as well
Good stuff man, love it!
Sweet. Looks like lots of fun.
Do u have the link to ur transmission gear box
I want to build a go kart but I'd have to design a good suspension design for it since I live on gravel roads
Is the original engine stock? (the red one)
Do you have a differential on the go kart
The steering is very good
Maybe I missed the stick shift part
Love to do this with a two stroke 250. Great vid 👍
If you did remember to not engine brake
800th sub awesome vids 👍
Mapp gas torch works wonders for bending steel like butter
you need to put on a Bow Tie steering wheel. trust me you'll like
hey man can you provide a link were you bought the engine and pedals
Beautiful houses, which state is this?
where did you buy your go kart (just the go kart not the shifter stuff)
Nice...!!! I would bet I could learn stick
Hi
I am after the same wheels and tryes as on this kart what size hubs wheels and tryes are needed for these please
Sean Hillerby try BMI or OMB. They have a package deal on front and rear hubs for racing style wheels. You just need to know your axle diameters.
tires*
Is that a 4 stroke 6.5 hp????
Yassine Bedoui 4 stroke 16hp
a torque converter type go cart is better or a gokart with manual transmission is better for speed?
2:40 and that is how the red dot sight was created
Any idea what brand your front wheel hubs are?
What engine did you use before you got a stick shift one ????? Great video
Where did you buy that engine
Where would you go to buy a frame or roller of this kind of go karts?
already see a huge flaw..... you dont have 3 legs
Alex Romo lol
Alex Romo it's like a stick shift anything really everything I seen had they pedals
Dumb ass
L
Alex Romo motor setting in wrong place muffler guy to hot
what is the rim you use on the front and back, and what is the name of this tire and the numbering?
Read title and you got mi like
Was that a ptm engine? You had on it first? I want to build my Own kart But i dont know what kinda engine I want on it yet could you help me?
Its a honda gx200 governor removed with ebay torque converter. If you want to go cheaper get a predator 212. Had that before and it worked great with a governor bypass
Thanks! But I was also Thinking to Buy a 125 cc pitbike engine. What would you reccoment?
If you know engines well and have a lot of experience go with the 125cc, but if you are new to small engines and go karts get a predator 212 or gx200
Allright Thanks!
Marc Zantinge for a gokart i recomend a honda 390 (or get a clone they work just as well) my gokart is running a ptm420(and whats the matter with you guys and torque converters
I have a question I'm not like engineer but why do you put a jumper cable or battery cable when you are welding?
Its an electric welder, so it needs a ground to complete the circuit
He didnt explain it to well there, yes he is correct but not complete with what he told you. Its called a welding cable, and due to the fact that its an arc welder it takes alot of voltage and a lot of amps through it, so they use a low gage high current copper cable and a high current copper aligator clamp, much like that of a jumper cable, which is used to connect two cars main power circuits together which may be only 12 to 24 volts, but need a hell of a lot of amperage to turn over (spin the fly wheel that turns the crank shaft which moves everything in the engine to start the rotations in which are required for the engine to run, if interested in knowing more look upna video about how an engine works) the engine. So anything thin and weak would melt. Hope this helps your curiosity!
500th SUB!
Where'd you buy the transmission?
You you welding on the floor??
I've always wanted to do this as well
A bike brake handle on the shifter would be more practical.
What model go Kart is that. Please respond I’m thinking of getting one
Could I use bike gears on a kart?
Subbed for the Mini, like mine but blue
What welder r u using ?
Where do you get the metal
Manual transmission = better control on speed and torque delivery = easier to power through drifts
That doesn't have gears are you stupid
Nice im def subbing
What engine did you have on in this video?
what welder do you use
Hey Japanda tuning can you tell me what type of engine that is on the go kart in this video please reply
honda gx200. Watch some other videos on my channel
what is the mesure of your frame?
Where did you order your engine from?
i like the chassis omg
Just in case your wondering, a manual go kart is the same as a shifter kart
but stick shift go kart sounds cooler :D
hey where did you buy the lifan from? I would like to get one myself for my gokart
Got it from ebay. Its a pain cause shipping is $95 tho. Should be well worth it. It was a pain to figure out all the wiring and clutch but its all fixed up. Got a new fuel pump coming this week so I should be riding this weekend!
Awesome! Did you find a wiring harness online? Or did you make one? If so, what wiring schematic did you make it off of? I was thinking when I make mine I would put the clutch on the steering wheel using a bike brake.... just an idea to toss around. Thanks for the info!
The wiring harness comes with the 200cc lifan - set kit, so i used that but modified it by moving 2 wires to different ports and changing around one more wire to get it to work. I can make a video on the wiring if needed.
That would be so great if you could do that! It would be a lot less time that I would need to spend trying to figure out how to get the whole wiring system to work
Why not put clutch on shift handle?
i would really like to know the name of this Song while you are driving :)
Real nice !!!
before you weld make sure that you have bare metal!!
It looks like bubbles go kart off the trailer park boys that’s hilarious
why dont you put the clutchon the gear shifter
Anyone know where i can get a frame like this?
Hey J P I am gathering the supplies now to do a frame. If you wouldn’t mind sharing a few details on the build of your frame I would truly appreciate it big man. I don’t know how to get you my email without having trolls all on it. So if you know a way to privately get you I will send you a sheet of dimensions I am needing. If not no skin off my back. I get it u probably get all sorts of silly shit asked of you already. Love what you do keep it up
👍👍👍
What kind of motor is that
what is the name of that frame?
Haven’t watched the vid yet, but does it have a auto
and it's a live axle
a live axle? be careful it doesn't run away lol
Nice neighborhood.
where can i find a gokart like that?
new suber liked and shared
bro can u say the mesurments o these go cart
Welds are a little rough
What ur motor
What is the name of the engine with the red pull start?
I would have designed a rack and table to lift the cart first. so your not welding on the ground.
Bench Vice. Goes in a bench lol or it’s basically pointless
It looks dangerous. Maybe that's why the clutch is on the steering wheel on other karts.
Awesome slap a gsxr 1000 motor on it
song used please?
first one: Andrew Graaf - Nostalgia
second one: Lady Parts - Through The Night
thanks man
Nice
Should of just bought a miata and stripped it down 😂😂😂 lol jk nice build bro! 🤙🏾
No thats not funny
my stepdad has that kind of kart and it's a six horsepower
It's not as fancy as you think LIFAN is pronounced lie-fan not le-fan 😄 other than that cool video man
now i'm really confused on how to pronounce it
and drop the steering wheel hieght, closer between your knees instead of over them.. it looks like your driving a bus
Put a proper securing pin through that clutch pedal, that little pin you used is rough as fuck man😂
love it
your steering Ultra waved....
steering wheel set to high
the clutch is supposed to be on the steering wheel brah
the clutch can be wherever i want, brah
so 3 pedals on this tight space is ok for you,sure its on the hand for convenience
your steering wheel looks like it is too high
How to buy a centrifugal clutch
I wish I had a life ... I mean go kart