✨ SAMSUNG OVEN TEMPERATURE SENSOR-FIXED ✨
Вставка
- Опубліковано 11 січ 2020
- ✨ SAMSUNG OVEN TEMPERATURE SENSOR-FIXED ✨
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
CLICK HERE TO ORDER A NEW TEMPERATURE SENSOR: amzn.to/3gDzETr
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@scottthefixitgu
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/scottthefixitguy
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/scottthefixitguy .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly. - Навчання та стиль
Thank you for a great video really helpful
Thanks so much Raymond 😊
Awesome fix
Thank you👍
🎉 fixed my oven thanks to your video!
Thanks Natasha😊👍
Fixed our oven too! Thanks! It was quite easy too! We used the Amazon part.
Scott, your videos are awesome. Thank you! Any suggestions if replacing the thermostat doesn't work? Our range works but not the oven, on any setting.
Thanks Patty,
Is it gas or electric ?
@@ScottTheFixItGuyChannel
Gas. Thank you!
THANKS! The rear panel was a bit puzzling at first. I needed to change the oven temp sensor...Thank god I have a gas range and don't have to remove any kind of broiler element...Its always satisfying to fix things yourself.
Nicely Done 😎
@@ScottTheFixItGuyChannel Am I supposed to reset something after installing it to make the oven work again?
@@moomoopuppy508 Just remember to also plug it in. If that doesn't work, you may have to replace the control board.
Hello, Thank you for your very easy to follow video. I noticed my oven temperature setting and the actual internal temperature are not the same after testing with 2 oven thermometers. I was wondering if the oven needs to be calibrated after changing the temperature sensor?
Yes it will👍💻 New Appliance Repair Blog - lots of DIY Fixes for Your Home Appliances - Click Here:
ApplianceFixes4You.com
Thank you!
I hope this helps my oven I’m having this same problem and hoping I won’t have to buy a new oven ❤
Please let me know how it goes 👍
my Samsung oven model # NX58H5600SS/AA has not been heating to the correct temps, I went through the re calibration steps and it seems to be ok but when the set temp beep goes off it's still not to the correct temperature base on the gauge I'm using inside the oven. Food still is not cooking right so finding this video I ordered the thermistor from your link but I'm curious now that after I change it out do I need to reset the calibration again or how do I reset the calibration back to factory settings? Thanks for you posting this video
It would be good to check the temp. Again with your analog thermometer.
Make sure to call Samsung if this happens in the first three years of purchase. They'll mail you a sensor for free in that window.
Thank you.
My Samsung stove only has 1 year warranty on parts and labor.
Helpful. But my oven is fine but the heat plates on top surface are only on top heat mode. They heat on highest no matter where you move the know. Any help with this
Can you send the same question to my email at: Scottthefixitguy@yahoo.com
I’ve owned two Samsung convection ovens, and while they perform pretty good, they both had the same issue… when setting a temperature, the oven will start to heat up and after about 10-12 minutes it will beep and indicate that the oven is at 350 degrees, as an example. But an analog thermometer placed in the center of the oven (you know, where the rack of food will actually be) is reading like 40 degrees cooler than the set temp. If I wait for 10 more minutes the rack thermometer will actually get to the set temp. So it seems like the temp sensor probe in the back of the oven senses that it’s at 350 degrees and the oven will beep to tell me it’s preheated, but the actual full oven isn’t heated up yet.
Again, if I wait 10 more minutes, it eventually does heat up. I just don’t understand why my fancy Samsung ovens aren’t sophisticated enough to realize that the oven isn’t actually pre-heated and ready. It’s just a quirk to the ovens that left me rather unimpressed with their performance.
Keep in mind that, before I realized this problem, I was putting food in right when the beep went off. It’s pretty common to lose a fair amount of oven temp each time when opening the oven.
So let’s say I set the oven to 350 degrees, and it beeps - making me believe the oven is actually preheated to 350 (in reality it’s more like 310), then I open the oven and add the food and lose another 10-15 degrees just by opening it up. So I put my food in and the oven is around 300 degrees, it’ll take like 10-15 minutes just to recover and get to the actual 350 degrees it’s supposed to be cooking at. If you’re cooking something for only 20-30 minutes it will be hardly cooked at all when you open the oven on that set timer.
Anyways, now that I realized that the oven is lying, and it’s not actually at temp when it beeps, I realized I just need to preheat the oven for a longer time every time I cook stuff. And I’m getting much better results. I just feel disappointed in the performance of the oven because you can’t depend on it based on it’s indicated temp. It’s a high dollar oven and I would have expected more for the price. Keep in mind that I’ve used two different Samsung ovens with the same results. It’s not like the temp sensors were faulty, it just seems like the oven isn’t recognizing that the sensor being at a specific temp doesn’t correlate with the full oven being up to temp
Thanks Dexter,
Great advice 😊
Is the part number for the sensor the same for all Samsung ovens? Our model number is: NE59M4310SS.
That one will work👍
Our Samsung oven has two bake settings, and it runs on Propane. All of a sudden about 2 mths ago, the convection 'bake' setting wouldn't hold the set temperature. If I set it to 400, then the oven only reached to maybe 300 degrees or would fall to 225. On the other 'bake' setting, it seems to work fine. So, we've been simply using the other bake setting (the one that isn't convection). We are wondering if it's a temperature sensor with just the convection bake setting or if it's the fan or heating element on the Convection setting. How do we figure this out? Thanks
Hi Joan,
I would replace the convection fan element.👍
Nice video, however I don't think amazon sells oem parts. Most anazon products are cheap quality, made in china.
Do you need to reset it somehow, or should the oven already work? I replaced the sensor but the error code is still there!
Can you unplug it for 3 hours and then try again?
@@ScottTheFixItGuyChannel Can I just shut the breaker to it for 3 hours? I'll try that and let you know if it worked. I really dont want to check the continuity of each of the wires.
My samsung gas oven both igniters tested 3.0a but preheat stuck on 150° i don't know what else too check stove working fine. 😢
95% of the time, new igniters will fix it.
@@ScottTheFixItGuyChannel Thanks for the advice a new igniter fixed my other oven problem but the samsung stove had too junk it couldn't get that screw off the burner tube "rusted", i needed new knobs probably a new igniter so i gave up i took a $75 loss anyway buying it used didn't want too pay more too fix then what i paid.
Did not fix mine what else could it be
What symptom do you notice?
Was your keyboard hot to the touch? When you had your oven on? Thatshow you knew sensor was bad?
Dont need to take the oven door off. Just might be a little long reach.
Video is really helpful but $50 is not cheap.
Cheaper than buying a new one
50 is really cheap for this repair.
If this occurs during the first 3 years after purchase they will mail you a sensor for free.