This is the best tutorial video ive ever seen. i have this exact mower with the exact problem. ive got it for sale for 50.00 on craigslist, but if i dont sell it, i will fix it with this tutorial and then sell it for double what i was asking.
Exactly what I plan to do with my free 20" mower tonight after work. (Identical mower 2 years old) I'm sure the main jet is the culprit, but I will go through all the stuff you did in the video. This will help a lot, thanks!
This is exactly what is happening to mine. Regapped the plug and some starter fluid and it runs for a moment. Now, to narrow the focus and clean the tank/fuel line and probably the carb.
Great video! I have the same model and it just cut out mid service. Then it would start and immediately cut out. I followed all your steps and it's like brand new. Thanks buddy!
Hopefully I don't have any issues with my yardmachines mower after sitting all winter. It's been in a warm place and the gas is out. It's a 2022 model so it should be ok.
Thanks so much for your video 📷 I try I clean the way you splain I put every piece the way in Start awesome 👍 I need to test how cut, because I dit before but like 2 minutes after start when off 📴 I let you know how is working this Time
Anybody know why start working perfectly for like 5 minutes after that start slow down in make a noise like is missing gas ⛽ like when is run out gas any answers I appreciate
I've been trying to get my mowers going. The only thing I'm confused on is the hole on the white piece of the carburetor. I can't see to the back of it. Looks kinda like rust. I've picked at it the best I could but can't fully see to the back. In your video, I seen you spray carb cleaner from the bottom and it shot out the top. I was thinking now about taking a really thin drill bit and seeing if I could drill that hole out (below the silver ball). Thoughts on this would be appreciated!
yeah if you spray from the bottom like I do around 04:08 it should come out at the top.. a drill bit should work as long it's small enough to clear the obstruction without making the hole bigger..
I had the same exact problem, I followed all directions on this video but it still won’t start up , however if I spray starter fluid it runs for a second . I did notice the priming button seems to not tighten up when pumped ,could that be the issue ?
A bad primer should not make the engine stall.. The engine needs fuel, spark and air in order to run.. So if it runs for a second with starting fluid you briefly have all three.. Then you lose one and it dies.. Question is which one are you losing? Could be that you still have a fuel supply issue even though you cleaned everything.. Or, clogged vent on fuel cap could restrict air which could cause stalling also.. And fresh gasoline.. that's a definite must have..
I have this exact same mower. Its only about 2 years old. It starts runs for a second then dies. I've seen several videos all identical to this one and i've followed them exactly and I can get my to start. I took apart the carburetor 3 times by now to make sure I have everything right and cleaned it as best I can. The holes are all clear and the spray goes right through. I changed the spark plug, cleaned the gas tank, and replaced all the fuel with brand new fuel. I have to prime it about 5-6 times for it to start, but then it dies after a couple seconds. It does the exact same thing it was doing before I started working on it. Its driving me crazy. Any idea what I can do? Oh also I cleaned the air filter and tried starting it with and without it.
05:44 This is the exact clear tubing I used and I never replaced it.. 2 years later it's still doing fine.. 1/2" inside 5/8" outside diameter: www.homedepot.com/p/Everbilt-1-2-in-I-D-x-5-8-in-O-D-x-10-ft-Clear-Vinyl-Tubing-T10006010/304185142?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax&cm_mmc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax-71700000097492030--&gad_source=1&gclid=Cj0KCQjwqpSwBhClARIsADlZ_TkE9-yylNglTgnQJAQKlOBIqYp4fNKX1UczgRi1K7DLEELuF661PT0aAietEALw_wcB&gclsrc=aw.ds
just followed your video step by step and it works! the sound of the mower turning on had me smiling ear to ear
Yeah that's a good feeling.. Thanks for reply..
This is the best tutorial video ive ever seen. i have this exact mower with the exact problem. ive got it for sale for 50.00 on craigslist, but if i dont sell it, i will fix it with this tutorial and then sell it for double what i was asking.
Exactly what I plan to do with my free 20" mower tonight after work. (Identical mower 2 years old) I'm sure the main jet is the culprit, but I will go through all the stuff you did in the video. This will help a lot, thanks!
You are welcome.. Good Luck..
This just helped me troubleshoot and fix a clogged fuel line on my own mower. Thanks for the great video!
You are welcome.. Thanks for reply..
This is exactly what is happening to mine. Regapped the plug and some starter fluid and it runs for a moment. Now, to narrow the focus and clean the tank/fuel line and probably the carb.
Great video!!! Got mine running great because of your step by step easy instructions
Thank you! I followed your video and got my lawn mower working . Great video.
Glad to have helped..
man this video was so helpful and very well made, thank you
You're welcome.. Thanks for reply..
Great video! I have the same model and it just cut out mid service. Then it would start and immediately cut out. I followed all your steps and it's like brand new. Thanks buddy!
You are welcome.. Glad to have helped..
Man I just replaced my air filter and drained the gas. Still not working but your video is going to help me so much
Excellent presentation!
Awesome step by step video! Hard to find simple well done videos like this. Thank you!
You are welcome.. Thanks for your reply..
Great video! Many thanks 🙏👍
You are welcome.. Thanks for reply..
I have the same mower , thanks for the info . I'll be doing this soon
You are welcome.. glad to help..
Super presentation!
Thanks..
Thanks for this one! Learned a step or 2.
You're welcome.. Thanks for reply..
Spot on editing :)
Thanks..
Thank you sir, helped out a bunch..
Glad to have helped.. Thanks for reply..
Excellent!!
Thank you man. You're appreciated.
You're welcome.. Thanks for reply..
Nice video!!
Hopefully I don't have any issues with my yardmachines mower after sitting all winter. It's been in a warm place and the gas is out. It's a 2022 model so it should be ok.
Great video, appreciate it 👍
Thanks..
Thx this is just what I needed
Glad to have helped..
Neat job
I will try tomorrow! But what if the carburetor become leaking gas.. thank you!!!!
If it’s ohv AllWAYS check valve lash and adjust it and clean carb plus tank
That’s all it takes on 97% to run
Thanks so much for your video 📷 I try I clean the way you splain I put every piece the way in Start awesome 👍 I need to test how cut, because I dit before but like 2 minutes after start when off 📴 I let you know how is working this Time
You are welcome.. Glad the video helped..
I just cleaned but is late here I wish to test but is almost 10:00pm my neighborhoods are sleeping 😴😴
I start working perfectly for like 5 minutes after that start slow down in make a noise like is missing gas ⛽ like when is run out gas
Anybody know why start working perfectly for like 5 minutes after that start slow down in make a noise like is missing gas ⛽ like when is run out gas any answers I appreciate
I've been trying to get my mowers going. The only thing I'm confused on is the hole on the white piece of the carburetor. I can't see to the back of it. Looks kinda like rust. I've picked at it the best I could but can't fully see to the back.
In your video, I seen you spray carb cleaner from the bottom and it shot out the top. I was thinking now about taking a really thin drill bit and seeing if I could drill that hole out (below the silver ball).
Thoughts on this would be appreciated!
yeah if you spray from the bottom like I do around 04:08 it should come out at the top.. a drill bit should work as long it's small enough to clear the obstruction without making the hole bigger..
I had the same exact problem, I followed all directions on this video but it still won’t start up , however if I spray starter fluid it runs for a second . I did notice the priming button seems to not tighten up when pumped ,could that be the issue ?
A bad primer should not make the engine stall.. The engine needs fuel, spark and air in order to run.. So if it runs for a second with starting fluid you briefly have all three.. Then you lose one and it dies.. Question is which one are you losing? Could be that you still have a fuel supply issue even though you cleaned everything.. Or, clogged vent on fuel cap could restrict air which could cause stalling also.. And fresh gasoline.. that's a definite must have..
I have this exact same mower. Its only about 2 years old. It starts runs for a second then dies. I've seen several videos all identical to this one and i've followed them exactly and I can get my to start. I took apart the carburetor 3 times by now to make sure I have everything right and cleaned it as best I can. The holes are all clear and the spray goes right through. I changed the spark plug, cleaned the gas tank, and replaced all the fuel with brand new fuel. I have to prime it about 5-6 times for it to start, but then it dies after a couple seconds. It does the exact same thing it was doing before I started working on it. Its driving me crazy. Any idea what I can do?
Oh also I cleaned the air filter and tried starting it with and without it.
Could be bad ignition coil.. lawnask.com/bad-ignition-coil-symptoms-lawn-mower/
What size is the fuel line
05:44 This is the exact clear tubing I used and I never replaced it.. 2 years later it's still doing fine.. 1/2" inside 5/8" outside diameter:
www.homedepot.com/p/Everbilt-1-2-in-I-D-x-5-8-in-O-D-x-10-ft-Clear-Vinyl-Tubing-T10006010/304185142?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax&cm_mmc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax-71700000097492030--&gad_source=1&gclid=Cj0KCQjwqpSwBhClARIsADlZ_TkE9-yylNglTgnQJAQKlOBIqYp4fNKX1UczgRi1K7DLEELuF661PT0aAietEALw_wcB&gclsrc=aw.ds
Do you have an ultrasonic cleaner ?😮
no i do not
good video... fixed mine same way... there is no gas filter right
You could add one but no, mine did not have a filter..
@@tongo117 thanks for the fast reply. I do not thin i will add one, Iwill just keep the gas clean and end of year empty gas tank.
FIRST to comment - I could not resist 😁
Yeah you snuck that in before this goes viral..
I have one of these lawn mowers
Hey peanut butter man is that white piece on the side of the carb soppose to be lose?
no it should not be loose
@@tongo117 if it's wiggling does ut mean I have to get a whole new carburetor?
if the mower runs ok with it being loose I wouldn't worry about it.. if it's so loose that it's going to fall off you could glue it back on..