Thanks man, I had to do the wiring tho cuz without the bridge every time I turn on my high beams the lights just shut off completely, the bridge lets them run continuously. The leds work differently since they only have 2 connections
Hey man awesome video only one I’ve found, can you tell me, is that lens actually flat on the backside? I’ve been watching videos on etching these and all the ones they had were like “half dome” type lenses. Thanks buddy
If you run the demon eyes to a switch and have them turned on on the app when you turn power off, will they stay on again when power is switched on again?
They will go back on with the switch but it could be possible it may reset the color after you turn it off, I would say it shouldn’t but there’s a possibility
www.lowes.com/pd/Lexel-10-5-fl-oz-Clear-Paintable-Solvent-Caulk/4714985 this is the exact sealant I used. I used clear just so it’s not seen as easily but any silicone will do. So far its held up with no problems or leaks, better to put a bit more on the first time than going back to redo it.
Great video man! You did do a lot of extra wiring that didn’t seem necessary but it’s nice to see someone doing it differently. Great stuff
Thanks man, I had to do the wiring tho cuz without the bridge every time I turn on my high beams the lights just shut off completely, the bridge lets them run continuously. The leds work differently since they only have 2 connections
@@hernandez-ic9qj how much u would charge me to do mine? Kmsl. Not joking tho.
@@asaroyal1468 bro I feel the same… take my 💰 💰 haha need these to complete my white new edge 😎
Hey man awesome video only one I’ve found, can you tell me, is that lens actually flat on the backside? I’ve been watching videos on etching these and all the ones they had were like “half dome” type lenses. Thanks buddy
Would you still need to bridge low and high beams if you put an h1 led inside of projector?
Great video! What brand and type of paint did you use??
It was matte black paint, not sure the brand. It could have been rustoleum but I know it wasn’t cheap dollar paint
Exelente amigo buen video
If you run the demon eyes to a switch and have them turned on on the app when you turn power off, will they stay on again when power is switched on again?
They will go back on with the switch but it could be possible it may reset the color after you turn it off, I would say it shouldn’t but there’s a possibility
Alright thanks so much for the info and how to video 🙌🙏
What did you use to reseal the housing and how is it holding up now?
www.lowes.com/pd/Lexel-10-5-fl-oz-Clear-Paintable-Solvent-Caulk/4714985 this is the exact sealant I used. I used clear just so it’s not seen as easily but any silicone will do. So far its held up with no problems or leaks, better to put a bit more on the first time than going back to redo it.
Have you had any problems with headlight brightness? Being able to see at night? Looking to do this to mine! Great vid btw
Nope, they’re much better and brighter than the stock halogen bulbs. Just make sure to properly adjust the headlights so the beam is aligned correctly