Had problems with the smoked ones peeling and getting moisture inside within 6 months, plus the smoked ones are so dark, might as well not even use headlights. Prefer the black housing over the smoked And when you install them, before you put them in, run a bead of rtv the whole way around the seam of the lense to the housing. Trust me. When you wire them in, don't use those clips included with the kit. They're junk and will always give you problems in the future. Do it the right way. Cut the wires, solder them back together & use shrink wrap around it
Those are so sick! You know it's time for new headlights when your friends always tell you that you need to turn your headlights on when they're already on high beams 🤣
@@jonathanjimenez528 I got a set. Brightness is passable but I cant seem to aim them quite right. The adjustment on them sucks and they are still pointed down too low. The high beams work pretty well tho.
@@jonathanjimenez528 it helped them aim higher? Maybe I can take them apart and somehow adjust them better that way... I mostly drive the car during the daytime anyway. I really love the look of them I hope they can work but you seem to get what you pay for and the price point on these makes me question the quality.
I just installed these today and the headlights/brights work, but the 3 little lights and halos don’t light up at all. Can you help? Am I doing something wrong?
@@daisythemustang figured it out. Gotta splice the wires really well. I used a few quick splices, the ones that you burn the middle to solder them together
1 on the 3 wrench scale my ass. The easy splice stuff just snapped the wire off from my car. Not the halos but the car itself. So now I can use my blinker until it gets fixed
Looks really cool sir when i am facing to the car, i hope you also have video in the dark how bright ness goes, thanks you very much ,have a pleasant day
these lights dont fit 100% that well, i have a 02 aswell they fit fine. but theres 2 prongs on the driver side headlights that go into 2 holes and 1 prong on the passenger headlight that goes into a hole on the passenger side once it lines up it should slide in well. hope this helps
These are so bad. I bought these and they point down and I already turned the knob to aim the headlights as high as they can go and I can’t see a thing at night. Would not recommend.
Now show them what a pain it is to adjust, since you literally have to take them out 20 times to adjust horizontal. Also, I hope those are copper quick connectors, as the aluminum ones lose connection over time and one day you are out driving and turn on headlights, only to find out they don't come on.
@@hugobalderas9478 no i havent .. returned this morning i probably could have figured it out but i already have the foglights spliced into the parking light connection so i said hell with them good luck with yours
These look great in the daytime, but suck ass at night. The high beams are useless. Those three cute little white leds flicker all the time. Checked the connections and all is tight. These are just PRC crap 💩
Shop these Raxiom Smoked Projector Headlights: muscle.am/2yU4sIw
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
Had problems with the smoked ones peeling and getting moisture inside within 6 months, plus the smoked ones are so dark, might as well not even use headlights. Prefer the black housing over the smoked
And when you install them, before you put them in, run a bead of rtv the whole way around the seam of the lense to the housing. Trust me.
When you wire them in, don't use those clips included with the kit. They're junk and will always give you problems in the future. Do it the right way. Cut the wires, solder them back together & use shrink wrap around it
i can vouch for the poor visibility lol
How are you supposed to change the bulbs when they finally go
Those are so sick! You know it's time for new headlights when your friends always tell you that you need to turn your headlights on when they're already on high beams 🤣
Might be time. 😂😂 Thanks for watching! -Zach
Where these bright I’m reading reviews that they are hella dim
@@jonathanjimenez528 I got a set. Brightness is passable but I cant seem to aim them quite right. The adjustment on them sucks and they are still pointed down too low. The high beams work pretty well tho.
@@misterbulger ppl are saying they replaced bulbs and that helped idk I’ll see when I get it
@@jonathanjimenez528 it helped them aim higher? Maybe I can take them apart and somehow adjust them better that way... I mostly drive the car during the daytime anyway. I really love the look of them I hope they can work but you seem to get what you pay for and the price point on these makes me question the quality.
Damm I love these lights beautiful mustang btw newedge will never disappoint 🔥❤️
Just ordered mine I can't wait to get those 20 year old bricks off
21
We’re your lights really low
I got these lights on my stang like 2 years ago. Very durable. Just get you a set of 6000k hids and your set.
donde hagarraste los focos para remplazar los que trae la luces
Wow... Those headlights look amazing, they're definitelg my style. Looks like it's something straight out of NFS underground haha.
I just installed these today and the headlights/brights work, but the 3 little lights and halos don’t light up at all. Can you help? Am I doing something wrong?
Bro same if you find out lmk
@@daisythemustang figured it out. Gotta splice the wires really well. I used a few quick splices, the ones that you burn the middle to solder them together
@@samuelstanton1021 which wires go where?
1 on the 3 wrench scale my ass. The easy splice stuff just snapped the wire off from my car. Not the halos but the car itself. So now I can use my blinker until it gets fixed
So I ordered the same light for my 2004 mustang and it came with 3 black and 3 white wires besides the plug and play. Why did yours come with only 2
Can you replace the bulbs for the halos so they can be multi color?
These are trash I bought 2 pairs already and the halos went out on both pairs very disappointed .
Same with mine. All of the LED lights are very dim; Kind of pointless, at this point
Gracias por compartir su conocimiento. Yo estoy en México y me ha Sido muy útil, pues ahora sí podré instalar mis faros 👍👍👍
I bought these headlights can I put axial led headlights instead of the ones built in?
High i ordered a halo headlight my mustang 2003, but how am i going to connect the high beam and which wire to connect?
Do you offer a similar set without the dual halos and the 4 LEDs on the sides?
With these is there any way to change the color of the halo?
Help Mine had 6 sets of wires al black and white and one of the 6 was a white one with a black stripe the instructions only show a older model
What year mustang do you have
I bought the single halo for the 2012 v6 and one of them is no longer turning on. How do I fix this
Looks really cool sir when i am facing to the car, i hope you also have video in the dark how bright ness goes, thanks you very much ,have a pleasant day
Thank you for watching! -Zach
Any video on how to adjust the beam?
You figure it out yet?
Yea
@@randoorlando443 same, I didn't at the time and was hoping you did
How do you adjust them?
@@andyptak5693 theres a screw on the back of the head light and you can adjust it by turning it
do they come pre aimed?
I got the wiring all set up but they seem to big they wont fit in my 02 mustang, am i doing something wrong?
these lights dont fit 100% that well, i have a 02 aswell they fit fine. but theres 2 prongs on the driver side headlights that go into 2 holes and 1 prong on the passenger headlight that goes into a hole on the passenger side once it lines up it should slide in well. hope this helps
My high beams and low beams are on the same bulb help
Can these take HID bulbs ?
These are so bad. I bought these and they point down and I already turned the knob to aim the headlights as high as they can go and I can’t see a thing at night. Would not recommend.
Same as mine. I tried raising the lights, but it just won't go any higher.
Now show them what a pain it is to adjust, since you literally have to take them out 20 times to adjust horizontal. Also, I hope those are copper quick connectors, as the aluminum ones lose connection over time and one day you are out driving and turn on headlights, only to find out they don't come on.
Are these DOT compliant ?
They are! -Zach
Can anybody help my lights will turn on but not my halo lights
I was wonder y my 3 lights would never turn on
I hate this i soldered them in and it’s not working literally did it the same but solder and it’s not working
Those splices don't look waterproof.
Only issue with these headlights is they are aimed down so much they barely work.
Which are the best in your opinion?
Add HIDs and aim them up.
@@ppmguire can't aim them up high enough to where I would have liked. They can go up but not nearly as high as they should
@@adamgipe3284 Maybe you got some duds idk. Mine are almost as high up as my 2015 Focus, but with HIDs I didn't want to aim too high.
Same as mine. I tried raising the lights, but it just won't go any higher.
Idk why mine has so many wires compared to this
i just got a pair and mine have more wires too three sets of wires. confusing
@@croftpydycroftpydy533 have you found a video to install them ?
@@hugobalderas9478 no i havent .. returned this morning i probably could have figured it out but i already have the foglights spliced into the parking light connection so i said hell with them good luck with yours
@@croftpydycroftpydy533 I was able to figure it out tied the black to the black white to white then wired it into the headlights harness
@@gearedupproduction8290 so all there loose ones together?
Bro my shit is not this easy it comes with this big ass silver battery n like 20 million wires
I don't like the look I wish I did they probably would be way brighter especially with led bulb 💡
my high beams dont work.
Hey there! If this is a brand new set of headlights you just got from us, please feel free to give us a call! 1-877-887-1105 -Zach
Those look better off lol
These look great in the daytime, but suck ass at night. The high beams are useless. Those three cute little white leds flicker all the time. Checked the connections and all is tight. These are just PRC crap 💩
First
Those are some ugly headlights then and still ugly now.. I still rather have the Ford Originals!
L take