New Sawmill Owners Should Watch! Frontier Sawmills, Woodland Mills, Woodmizer,
Вставка
- Опубліковано 22 жов 2022
- Lessons learned on a Portable Sawmill. Frontier Sawmills, Woodland Mills, Woodmizer, Cooks, and Baker Sawmills. #tymtractors #frontiersawmills
Equipment Used:
Woodchuck Dual Peavey: amzn.to/39lHwrw
TYM Tractors: tym.world/en-us/products/trac...
Mini Rake Grapple, the manufacturer, offered Tony's Tractor Adventure viewers a %5 discount using code "TONY" after seeing our videos. Learn More Here: www.agfolks.com/product/big-m...
Contact Joe Maine for Sawmill Blades: 229-563-1172
Tell him Tony sent you.
Frontier Sawmill: www.frontiersawmills.com/en_u...
Help Support these projects by hitting the "Thanks" button under the video! Thank you in advance.
Support the channel by using this Amazon Link. It costs you nothing else. amzn.to/3JbCHjQ
Disclaimer: The views and opinions expressed in
these videos are those of Tony's Tractor Adventure Homestead and do
not necessarily reflect the views or positions of
any entities they represent.
❤❤❤ I have watched 100's of sawmill videos and you are the 1st one who explained the equal tension. ❤❤❤
So true on tension he only one
i bet you have never watched any of the videos from Sawing with Sandy. This guy is one of the best
@@Casey6996 i will watch sandy ty
@@Casey6996 I will check him out
I am saving to buy a sawmill I am in Newport Tennessee I have an Alaskan set up now I have a Granberg and I am currently building a small cabin 608 square foot I have cut all my porch with the mill which consists of 6x6 post, 3x6 rafters, and 1x ceiling decking. I am just starting on my siding (board & batton) which I am cutting 3/4” I am getting some really nice wide boards after cutting off the live edge in am getting 27” wide boards which are beautiful. I am also cutting all the inside wall and ceiling covering out with the mill I figure it will take most of the Fall to get this done. I am currently dried in all windows are in, door, metal on the roof. This week I am insulting, and closing up the soffits.
I love these types of reality videos, tell it like it is, the right people appreciate this stuff and will always come back for more, thanks
Thank you so much for the support
Nice, thank you for a detailed instructions. I hope to get one small mill someday.
Thanks for the full explanation as well as not editing out imperfections.
Cheers 🍻 🇺🇸🦅🇺🇸
No problem 👍
I am a new Sawyer. I have seen hours of video...this is the first time anybody has shown me a walkthrough of Log Tension! Fantastic job sir. I just subscribed to your channel for this so great job. I will be watching. Thanks.
Thank you.
Appreciate the time and effort in helping the novice. Liked the ending; been at it three years and still make mistakes! Now that is a true educator. God Bless!
God Bless you too!
You could have easily edited that first cut out and we would have never known, shows what kind of guy you are, thanks
Great explanation of log tension and boxing around the pith. Very informative. That 6x6 turned out nice.
Brother, If I was smarter, I would have figured that out sooner. LOL! No telling how much wood I wasted by not understanding log tension. I am thinking about getting a bigger sawmill so, I can Quarter saw. I can't quarter saw much with a 5 7/8" throat. I may jump up to the OS31 in the future.
@@TonysTractorAdventure I wish I would have gotten the 31 as well. I still struggle with tension at times too. Keep up the great work.
I tend to go for a 90° roll for the second cut, too.
But I always check for plumb with a spirit level, I never trust my eye.
What looks right, never is!
Doing a quarter turn means that everything cut off the top is half edged, making re-sawing easier.👍
You are a good presenter and, I think a good operator. I recently visited my brother and saw him operate his WoodMizer LT40. He explained some of the same wood sawing measurements and set up “reasoning”. Though I am disabled and in retirement, I still really like this stuff.
I am fascinated with the sawmill too.
Thinking of buying for my own use, you have answered most of the questions I had. Thanks and I'll be watching to learn more.
We have upgraded to the OS35 and now we are adding the hydraulics. Good stuff coming.
@@TonysTractorAdventure Thanks for the update !, If I can ask what did you do with your old unit. I liked the simplicity of it. The more add on's can give you more to have to work on if something breaks down.
Great too see you again mate hope you are all doing well bro thanks for your videos it makes my day you both are great.
Thanks for the video. Ideally I work out from the desired cant to avoid extra cuts of thin waste. So, center the pith, line up the blade 3" above the pith in this case, then set the scale for dimension of slab boards I want/think I can get off of the top of the log, and raise the saw to the top slab height and start the cuts. This way, the waste is kept to the outside wane.
Thank you for explaining as you went 😊
You’re welcome 😊
I think you have forgotten to the your sawdust saver for your wife my friend! Thanks again for your videos Joe you really know what you are doing mate it’s amazing thanks again for that.
Good call!
I always wondered why they didn't rotate the log at the big mills and now I know. Thanks for the info and keep up the good work
Production mills are trying to get every square inch of board ft from each log no matter the outcome. In their defence, most will kiln dry with weight pressing down to hold their form. As a small sawmill owner, we have to think more like sawyers did 100 years ago. Kiln dried wood was rare, so they learn to cut more stable cuts.
You are a VERY good instructor. I have been trying to learn this skill for five years. You are to the point and have answered so many questions. Thanks
Thank you.
Thanks for the schooling. I have my first cant on my new to me Norwood LL24.
That is awesome. I know you will enjoy your new sawmill.
You know you can trust a wood worker when he wears an ISO certified Citizen Promaster Eco-Drive diver watch. That's my kinda' guy. That's a cool watch man! Idk how old your watch is but they don't make one with a silver minute hand anymore. They're red now and have been for a while
You sure taught me something about relieving the tension in the logs!! It makes perfect sense once you just think about it!! Thank you for taking the time to explain what you were doing, and, why you were doing it. Happy milling!
Thank you. I learn something everyday.
Outstanding video Tony! This is so well timed, as I am awaiting the arrival of my 1st mill! Thank you so very much!👍
Glad it helps. I am hitting the sawmill tomorrow
Me too. I’m An hour away from starting up my new mill. Good luck.
Good video. I have been looking at all the mills I can. Gonna get me one eventually
I recently upgraded to the OS35. I have an extension kit coming. Once that gets here, it will be next level for a manual mill.
Nice job explaining and showing. You are a good teacher. All of the background information helps to understand it better too.
Thank you for taking the time to do this well.
Thank you
hi Tony! I've spent the past couple evenings enjoying your video presentations. I am about to get into the sawyer vocation with a bunch of logs we obtained while clearing a wooded property in cottage country Ontario. Your advice is excellent. I get the cutting part... but it seems to me the skill is getting the uncut timber onto the bed. Nice to have a good tractor! Andrew C.
A tractor is so helpful. It makes everything better
I sawmilled a ton with my OS27, then got tied up building a house and it hasn't been set back up yet. Been a little over a year since I have run the thing. Good watching you run yours!
I understand. We are building a lot using the lumber we cut. Good times!
This is great information! We have a woodland mills sawmill and love it! I’m glad we got it. We have used it a lot in the past 18 months
Thank you. I enjoy my mill too. Relaxing
Tony you are far better at teaching then most.for the simple idea you need to know what you are doing before you can teach. Great job again thank you I could work with you any day with very little problem on behalf ether you or I again thank you
After working the mill over the last three years, I understand, I know very little. Everyday, I learn something new, or understand something deeper.
I love all of the explanations of your cuts.
I am chainsaw milling and you have given me practical information to use for my lumber too. I currently am cutting old growth oak from a tree off of our land. After I dry it I will make my final cuts to clean it up and will mortis and tennon a king size bed.😁✊
Thanks
After we get the house built, I will get to make some furniture.👍
Your sawmill videos are awesome. I recently purchased a sawmill and hit the ground running. Was able to cut 9 true 6x6 cedar posts in my first weekend. Thank you!!!
That is awesome. Keep at it. We are learning more each day.
I learn more about about logs and cutting them with every video thanks Tony and Tanya
It seems I have Ahah moments all the time. 😁
Well done and well explained! Thanks for sharing Tony!
Thank you for following our learning journey.😁👍
Enjoyed your video! Good demo's and efficient explanations. Got a new mill a couple of weeks ago and it's almost set to go. Thanks for taking the time to make this.
Glad it helped!
That was very informative. Never thought about log tension. Great video!
I never thought about log tension, either. I learn more each day.
Thank you I appreciate your help
Dan from Alaska
Thank you so much for the video!!!!
Thank you, Tony. Always interesting, and fun to learn.
My pleasure!
Thanks for taking your time and making this informational video for us that new to this art
It is an art and we learn every day. We are about 3 years in.
I love watching you alls videos I have learned a lot, beautiful part of the country there !
Thank you.
Very good video Tony, lots of information. Keep up the good work Scott
I have learn a lot over the last 3 years. I understand now how much I really don't know!
Pretty new to your channel. So far I'm enjoying it. Thank you for your time and effort.
Thank you
The only reason why I can't speak in regards to helpful hints tips and suggestions is because I don't have the experience so therefore I'm letting you teach me of course it is experience that I'll never get to use but I love it just the same keep up the good work I'm proud of you
Excellant demonsration.
Thank you so much! My demonstrated how to cut height metal back stop with my new sawmills. That video just came out today.
Great video and explanations
Thanks for sharing your knowledge! All the way from Australia
Thank you
Awesome video Great work !
Very informative, Thank You.
You are welcome!
Thank for the lesson!!! Made it easy to understand 12/30/22
Thank you for letting me know.
Good job explaining why you do the cutting that way!! thanks
Thank you.
Great and simple explanation on getting size cant needed. I notice you use the screw type log dogs vs cam lock. I have used several types including the screw lock but found the cam lock .quicker and more convenient for me, I look for every advantage to simplify my process. I truly enjoy your videos.
I have to weld my cam lock up. The weld broke on it. Thank you for thoughtful input. I appreciate it.
That oak slab wood will get your woodstove corn fritter hot in the morning. I'm sure you know
Nice pace. I just finished assembling my mill. Hope to fire it up tomorrow. 😅. You look so happy and peaceful doing your milling.
It is my happy place.
Day Tony; another beautiful one.
I hear everyone call it a CANT! No one ever has told me why it is called a can’t!
Now I figered it out!
Once you have trimmed off all the sides “you can’t call it a log anymore!!!!!
After much, much figuring etc; I had to order nother mill.
It is to be delivered tomorrow. My wife said she just hopes I live long enough to saw enough oak boards for her fences between yard and pastures and barn. May God bless if you R A saved believer and keep um coming loved this presentation
God bless you too. I have been cleaned!
Awesome and thank you for sharing.
Our pleasure!
Very helpful video.
Great channel. I just bought an OS23 with a 10hp Briggs. I noticed yours had electric start, but I didn't see that option. Mine hasn't shipped, but watching your videos gives me confidence about assembly and use. I'm using Logosol chain saw mill currently. It has its place, but at 71 years old, I need a little less work. 🙂 Thanks!
I upgraded my engine from the 7 HP.. I use my sawmill almost every day.
Hy Tony always I learn something from your videos
I am glad. I love to learn too!
Thanks, what a great and honest video!
Thank you.
Thx for the info!
I'm that slab that you cut 2 1/8 in could be cut into 24/4 slabs and used for stickers you always need stickers
I'm using sawdust on my garden, too. I study different gardening methods. I'm doing a version of Back to Eden using sawdust instead of wood chips. DON'T till it in. As it builds up on top, the bottom layer rots and gets a fungus network. Just pull back a thin strip for direct sowing or put the starts in extra deep.
Thanks for the 101 ! Keep up the great work!
Thank you
@@TonysTractorAdventure Hooah!!!
I do not have a sawmill but pretty sure I’ll be purchasing one in the future. Great video of explaining!
Thank you. I love having a sawmill.
Great information, thanks
Glad it was helpful!
Good job explaining Tony!!
I noticed your push handle started peeling, you can wrap paracord rope with a knot for each wrap and a few drops of super glue will keep it there forever.
Thanks for sharing!!
Thank you. I need to do some fixes for sure.
I loved this video. I learned a lot!
I thank you
Measurements are always great especially when it comes down to a baker's dozen
im looking for some rough cut lumber . wish i lived closer id take all the scraps. great job explaining the tension of the lumber.
We are still learning every day! Thank you.
Excellent video!
Thank you very much!
Great job.
Thank you
Excellent!
Thank you.
Regarding tension wood and trying to avoid bowed lumber. I suggest that the tension you encountered was prevalent due to the amount of summerwood vs springwood and has to do with vigorous growth and the best way to eliminate it is by slow drying. with weights on the top of the unit while drying.
Great job on explaining how to do that
Thank you. I finally got around to making the video.
Great video Tony!👍🏻
Thank you
Nice job! Thanks
Thank you too!
Good video, very informative,
Thank you
really great teacher
Wow, thank you
enjoyable vid
Your accent reminds me of my best friend from Tennessee. You and he look alike. He passed away recently. Sure miss him! He lived near Morristown Tennessee on the other side of the lake.
Good friends are hard to find. My heart goes out to you.
Very informative
Thank you
Great show
I appreciate that
Good job buddy!!
Thank you.
top notch! wish I could work with you
Thank you for saying that.
Thank you
Your are welcome
Good tutorial.
Thank you
Thanks for the video.I was just looking out of interest and amazed to find the tension seems to run around closer to the bark, limbs make saw go up and down as the wood near joints is very hard as it has to take weight of branch. Nice one overall, please keep it up.
Thank you. We are learning together.
Love your mill shed. Been trying to get one built but always putting out other fires. Sawed the lumber on our mill to build our barn. Just finished it a few weeks ago. Was going to send you some pictures but do not see a way to upload in comments. Enjoy your channel!
I understand having other fires. It took two years to build this. Still, it was worth it
@@TonysTractorAdventure i also need shed over my sawmill, the front of yours looks like 30feet between posts? the beam looks like 2x12 ?
Thanks for the effort in putting this video together; very informative. I’m a new sawyer and was wondering why you only took off the knot (22:20) when you knew that much more needed to be taken off in the next cut?
My saw only has a 5 7/8" throat.
Congratulaciones, veré didactic presentación. Just received a new hd36 v2 and sholud have it running in a couple of weeks. Our trees are beginning to reacción our initial 20 inch" diameter original target. Beguining to ha excess 9 to 14 inch trees ( no knots). Would these inch as much. 50% softwoods 50% hardwoods.
Great Video
Thank you
Hi Gary from the UK here grate video very interesting and informative keep them coming, keep up the good work with the videos, just one question is there a calculation to work out the shrinkage or a rule of thumb.
Thanks, will do!
Ty great vdo im knew
welcome aboard. We will be doing a lot of sawmilling this summer.
I’ve never heard anyone explain tension on a log they’re sawing, so naturally never heard how to prevent bowing. I guess they just assume we know or they don’t know, thanks
It is an art more than a science.
I've watched and re-watch lot of your videos
Thank you. I can look back and see the journey and how we have learned along the way. I used to thing I had a good understanding. Now, I know better! LOL!
@@TonysTractorAdventure well I can Agree with you on that, at 63 my kids still tell me how I don't know much 🤣
I wasn't allergic to poison ivy either, until 3 years into clearing my property. Now I am ....
I have heard of people becoming allergic later in life, but to this point I don't know of anybody in my family that is allergic to poison ivy. Could be because I grew up in the woods in the stuff.
@@TonysTractorAdventure I felt the same way. I thought I was immune. Then after a ton of exposure.......booom. now I am allergic.
Lots of good information there. I find it hard to determine when my blade really needs changed. Any rule of thumb for how many logs you're getting per blade? (realizing there's a lot of variability with that)
It has nothing to do with the number of cuts. If the log is dirty, it will diminish the number of cuts you can get by dulling the faster. Harder Woods can blades faster. As the blade gets dull, it will become harder to push through the log. A dull blade also creates a very fine sawdust where a sharp blade will take out larger chunks.
Hi, Tony, greetings from southwest Missouri. Great explanation-- I really liked your "rubber band" analogy. Compliments to your camera person & editor, too! Where did you get that cant hook? Looks like it gives a good grip.
Thank you. There is a link for the cant hook in the video description. I appreciate your comment.
very nice
👍
Nice
Thank you
Great video. Will the lumber shrink down the 1/2 inch to the dimensions you get from the store?
No. It will shrink some, but each species of timber will be different.