Lost track of the woodcutting and started thinking of the smell of fresh-cut wood in the middle of a nice, clean forest. An awesome bonus to all that work.
I've been a rural landowner for quite some time. I always wanted to do something like that, I learned a lot from this video and subscribed. Cheers from Canada
Tenghen and Granberg sell a similar setup. They're both virtually identical. I have a 9' rail guide and I have intentions of buying another bit to extend it so I can rip 12-13' boards.
This first cut method is by far the best I have seen, I have used this method since seeing you video and without a doubt the most accurate portable method I have used or seen. Thank you very much brother for sharing this video, 10/10 mate👍👍👍👍👍
I agree this is the best first cut system of the dozens and dozens of videos I have watched. What did you use for the rails and the end brackets to replicate this?
I have had for many years a Jonsered 600+ Mini Sawmill that works great except that it takes up more storage space, even when broken down, than I like to give it. Your video has convinced me to replace it with an Alaskan mill. Thanks for a great video!
I was running this saw for about 2 hours at about a 30-50% duty cycle ua-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
@@Pizzafromthepresident I bought a 9' Tengchen guide rail on Amazon (Almost 100% identical to the Granberg setup) for $100. I plan to purchase a shorter guide and combine it with my 9 so I can rip the 12-13' boards I aim to. The chainsaw mill itself is separate. You can purchase rigs or even handcraft your own.
Good idea on how to square the third cut! I was trying to figure out how to easily do it and you figured it out for me. So, now I don't have to reinvent the wheel. Thanks
I am surprized those wooden saw horses, even held that much weight.Better metal saw horses, your taking a risk of it collapsing. You have many options to improve the handling of the lumber , over head chain hoist. A centering device to allow the rotation of the logs. The simple set up you have is working great. With some new ideas you could work smarter, safer, and not harder. Your taking too many risk with the idea the weight of the lumber could collapse those saw horses, and it would end up on top of you. The quality of the cuts are great, the viideo is excellant. I learned a lot watching this. Safety is what it's all about, take fewer risk. You have a great concept.
Thanks Troy, we're big believers of incremental improvements making a big difference in the long haul. We have generally felt under control handling the logs with the peaveys, but I agree there are opportunities for improvement. Happy sawing!
Best clip I have seen on the subject matter, you sir have refined the process to a fine art, and made an intelligent and articulate video to booth. My Thanks.
Awesome video. This video is the reason I purchased a chainsaw mill and I copied your rail supports :) They work great! One suggestion I had from a viewer on one of my videos using the supports is to weld a nut on the flange where the rail goes through the plate and then use a bolt to clamp the rail in place. I have had some issues with the rail vibrating and moving some while sawing. Thanks for the video! Subbed!
Thanks so much. Im heading to WV as midlife crisis. Im gonna buy a setup like that and cut logs. Ive been a contractor since 87 and omg good bye NY. Im pretty sharp as a carpenter but id have never thought of that. Awesome. If i can get some logs delivered I should be able to eat. Bravo. And I have a couple logs on my land Id love to cut for lumber. Bravo. I WILL send pics. Or share a link to my progress.
@Paul Cox hey there. Well I bought a place in Bluefield WV. Not nearly as rural as I’d hoped. Very close to Mercer Mall and I460. But I literally have bears walking into my house and ravaging my apple tree 10 feet outside my door. Deer coons fox everything is in my yard. No trees really to work like you did. But the homes built. It just needs finishing. Plumbing’s mostly done. Electric too. Finishing the Sheetrock now and door shopping. Thanks for the reply. Some day I’ll find some trees to play with. 😊
If you’ve ever heard of the bridge to nowhere. I can almost see it from my patio. And it’s finally getting done. Constant blasting going on. The highway will be a Mecca for 4 wheelers. I hope you get the chance to visit.
My second time watching. Great vid, very easy to understand. For my situation, this type of mill is portable. Thanks for you teaching skills. Congrats on your ambassadorship.
watched hundreds of wood milling videos you are the first one I have head suggest using the bark wood for Sidings. here in Scotland when I was a child in the 50s the bark board was widely used for lots of projects. indeed, it was probably the most used lumber of the working class.
Even though bark itself is super whether resistant, the problem with using it for applications where it's exposed to weather is that it causes water retention between itself and the wood it's attached to, causing the wood to rot faster.
Nice use of the Egyptian technical skill set at the beginning! My personal go to method since I'm always working solo. Brute force works if your a brute! So since I'm not on the Brutish side of things I have to go Egyptian quite regular! Work every time
@@abc20914 thanks for the advise. I got sick of filing chains and I'm a machinist , so I've built a pretty nice sharpening machine, no files needed, gives a factor grind a run for its money. as for the chain, no its not technically a ripping chain. But it is skiptooth and since its been with me, I've changed from the existing 30deg grind, to a 15 degree. I know some people go as low as 10, and I might still just to try it. But 15 seems to be a good compromise of feed pressure & durability. I'm guessing by 90, degrees, you meant 0? That seems really extreme to me, as does completely removing the depth guides. Whats the advantage of going from where I'm at, to the extremes you outlines? I'm pretty new to this, so I'm all ears. Keep in mind, I'm working will borrowed equipment, though I'm sure he too would welcome any improvements that could be made.
@@abc20914 haha..thats a bit of a loaded question right now, I'm in the midst of figuring that out. So far, the logs I know have been maple, elm & willow. Another one I am trying to ID might be Mulberry or Sassafras, not sure though. oh and I just found out the person whose equipment this is, has a previously used chain that he had dis guarded after hitting some metal. I'm gonna try to get that from him & play around with some stuff. You notice any difference in finish / quality of cut with different sharpening angles?
Had a few questions about the end plates and rails, so here you go! 5/32" x 2" x 2" steel tubing, bought locally. The end plates are 1/4" x 12" x 5". The notches for the rails are about 1-3/4" deep so that the 2" rails sit a bit proud. These were cut locally by a metal fabricator. Consider getting "offset" end plates of different heights (eg. 1 at 5", 1 at 10") if you are going to be cutting heavily tapered logs, like butt logs with lots of flare.
Lure of North: Please share your contact detail. I have good proposal for supply of variety Softwood in Round Logs and Cants supplies to Asian Region. Mine is: +233 550 753 195 (Cell) and +92 310 214 9796 (Whatsapp) while Email: info@kbocl.com Thanks and stay in touch please. Najam KB Overseas Co Ltd Ghana (West Africa) Karachi, Pakistan
@@hawkeyeshawkeyes7468 I think they're about 14'6" to mill up to 14' logs. I may not have shown in the video, but little stopper bolts in the end prevent the rails from sliding out of the plates if milling on an incline.
@Smokey Bear The boards went right from the mill up onto the building with no additional processing required. Aside from a negative outlook, what made you think the boards weren't accurate?
I have found much success putting a half inch or 3/8 inch cable between two trees and then using cheap Walmart come alongs to move very large logs into my work area.
I loved how you uploaded the trunk on top of the video for you from Western Macedonia Greece Florina and here we have the same and alaska cold rain snow, all good but i'm glad you with your house the sticks your chainsaw stihl nice you have your life.🇬🇷👍🌨️
I've had idea like this for a while but have wanted to see what others have done. Your setup could easily be adapted for logs almost anywhere. Great vid.
Your cat is a Bobcat! This is one of the better vids. No nonsense. Like the way you squared it up. I like most ppl want to know how/where do we get the "set up?
could you send me the drawing of the plates? what you made is better than I have seen. and simple and easy to use. I have watch it several times. love it thanks for shearing it
2:23 I didn't read through all the comments to see if someone already mentioned it, but fats will dissolve tree sap. If you want to un-glue your tape measure, slather some cheap vegetable oil on it, or if it's more convenient some of your bar oil.
Hi Patrick, thankyou for that information. Its everything I need to fab my own plates. Even though I have an old log cabin, I'm not as comfortable in the cold as you obviously are. Thanks again and take good care of yourself out there. Cheers Steve, ottawa canada
@@ianpitts8582 hi Ian, as I recall , the rails are 2" square stock @13 ft. Long and the 2 end plates are 1/4 inch sheet stock. I didn't recall seeing any more detail than that but as for fabricating the end plates, im sure its fairly straight forward. I havnt fab-ed mine just yet. Good luck
I do the same thing I let the saw idle for cool down. I ordered the hand crank And longer rails for my mill from Bailey's It's Ben 5 months back order I'm still waiting Great tip with the square
as with most rails, use what ever means to support the middle so the weight of the power head doesn't cause a sag on a long first cut. I use standard chain(chisel ground round as well) back in my start the milling of the chain cutters were hardened by way of design. hand file was useless@@SpringRubber
I bought my mukluks pattern and hide from you guys a while back...they turned out great ..double soles bison and moose and I made them larger to accommodate the beaver fur liner...lol great vid Thanks
what if you had no power for a table saw? A good saw for that is 220 60 amps, or 3 phase. If not they bind and kill you. Like Eric Lewis I was looking for the like right away. The lady helper doesnt hurt, Good help like that is hard to find in the woods. ;)
Good video mate and thanks. Spray the first 3ft of your tape measure with spray lube now and again to prevent the tape measure from getting all gummed up like that.
It's probably because I recently watched some videos on them, but I was looking at all that saw dust and thinking you could get a lot of loads in a sawdust stove out of that. Trying to think of how to collect it all. Maybe if you had a tarp down to keep it separated from dirt etc.
Helps with cooling, I think. Have heard it’s best to richen out the mix, and run a bit more oil. Is this true? Asking for a two-stroke emergency generator, which will run at a load for up to an hour at a time. Have Maxima K2 oil, and plan to run about 28 to 1.
Alaskan"s do not joke around. This is hard work and a tough and physical lifestyle! For example, this gentleman knows how to get "er" done because he takes pride in a job well done.
I don’t know what he is running... but you will want run something north of 60cc’s. A friend runs a Stihl ms261. Not the cheapest saw in the world. I have only begun to dabble in milling. I have done a few smaller Logs with my Husqvarna 240, which is only 40cc. I’m pushing it to the limit, but it’s fun. This fall I am looking at upgrading. You got to start somewhere! Hopefully this is helpful.
Far from being bob cat. As was pointed out already, that cat had a much longer tail than that of a bib cat. I see bob cats regularly here in the mountains that I call home.
The pyramids were sq rocks . Not logs,lol the piled earh up then pulled the rock over logs as rollers on a conveyor belt work.once stack completed the long task of removing the dirt began. This man is doing a awsome job of using his head to save his back. Bbrains are stronger than brawn.
Lost track of the woodcutting and started thinking of the smell of fresh-cut wood in the middle of a nice, clean forest. An awesome bonus to all that work.
The nature is beautiful, with rhythmic chorus of birds chirping, and noise of saw, the most irresistible
Seldom watched a near-19 minute video and felt like only 3 minutes elapsed. Well done, chap!
I've been a rural landowner for quite some time. I always wanted to do something like that, I learned a lot from this video and subscribed. Cheers from Canada
Agree with Quinn Kent; best first cut rail setup I’ve seen. I’m changing my setup after watching this. EXCELLENT VIDEO!
Tenghen and Granberg sell a similar setup. They're both virtually identical. I have a 9' rail guide and I have intentions of buying another bit to extend it so I can rip 12-13' boards.
Anyone else thinking "Damn he really trusts those saw horses!?" Good video. Well explained, and I appreciate the "Hot tips!"
This first cut method is by far the best I have seen, I have used this method since seeing you video and without a doubt the most accurate portable method I have used or seen. Thank you very much brother for sharing this video, 10/10 mate👍👍👍👍👍
I agree this is the best first cut system of the dozens and dozens of videos I have watched. What did you use for the rails and the end brackets to replicate this?
I have had for many years a Jonsered 600+ Mini Sawmill that works great except that it takes up more storage space, even when broken down, than I like to give it. Your video has convinced me to replace it with an Alaskan mill. Thanks for a great video!
Any time! Thank you for your vote of confidence! It has worked great for us for sure.
I was running this saw for about 2 hours at about a 30-50% duty cycle ua-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
I've started milling this way and I must say so myself I've produced some of the most beautiful lumber!
How much are those rigs? Minus the saw, I have one.
@@Pizzafromthepresident I bought a 9' Tengchen guide rail on Amazon (Almost 100% identical to the Granberg setup) for $100. I plan to purchase a shorter guide and combine it with my 9 so I can rip the 12-13' boards I aim to. The chainsaw mill itself is separate. You can purchase rigs or even handcraft your own.
Good idea on how to square the third cut! I was trying to figure out how to easily do it and you figured it out for me. So, now I don't have to reinvent the wheel. Thanks
I'm glad you made that comment, I wouldn't have watched that far and missed it!
One of the best things about the Alaskan mill is milling it where it is and not bring it home. No dirt in the log, no mess in the yard.
That was so cool. I own 40 acres of forest in Northwest Arkansas with huge Oak and Walnut trees. I can't wait to cut into one.
Gbbvg
@@ramachandranchandrab7150 What does that mean?
I am surprized those wooden saw horses, even held that much weight.Better metal saw horses, your taking a risk of it collapsing. You have many options to improve the handling of the lumber , over head chain hoist. A centering device to allow the rotation of the logs. The simple set up you have is working great. With some new ideas you could work smarter, safer, and not harder. Your taking too many risk with the idea the weight of the lumber could collapse those saw horses, and it would end up on top of you. The quality of the cuts are great, the viideo is excellant. I learned a lot watching this. Safety is what it's all about, take fewer risk. You have a great concept.
Thanks Troy, we're big believers of incremental improvements making a big difference in the long haul. We have generally felt under control handling the logs with the peaveys, but I agree there are opportunities for improvement. Happy sawing!
Are you joking? Please tell me you're joking...
I loved the part when you said "Tweet, Tweet, Tweet!" Oh wait, that was the insanely loud bird at the beginning haha
Best clip I have seen on the subject matter, you sir have refined the process to a fine art, and made an intelligent and articulate video to booth. My Thanks.
I knew you had to do something to keep the saw from binding. The little shims work perfectly.😃👏
Great Video! Love the kitty coming through at 12:00 or so showing off its kill for you. Love it!
Best first cut rail system I've seen. Love it. Thanks for the Video.
Awesome video. This video is the reason I purchased a chainsaw mill and I copied your rail supports :) They work great! One suggestion I had from a viewer on one of my videos using the supports is to weld a nut on the flange where the rail goes through the plate and then use a bolt to clamp the rail in place. I have had some issues with the rail vibrating and moving some while sawing. Thanks for the video! Subbed!
How did you go about finding square tubing? I can't seem to find any more than a few feet long, so maybe I'm just looking in all the wrong places.
Thanks so much. Im heading to WV as midlife crisis. Im gonna buy a setup like that and cut logs. Ive been a contractor since 87 and omg good bye NY. Im pretty sharp as a carpenter but id have never thought of that. Awesome. If i can get some logs delivered I should be able to eat. Bravo.
And I have a couple logs on my land Id love to cut for lumber. Bravo.
I WILL send pics. Or share a link to my progress.
Walter Kogut New York out!!! Brother Andy can take his brigade back to the Soviet Union
Also look at auctionzip.com for farm auctions that might have aged lumber??
Hell yeah how's it working out!? I'm about to build a cabinet like this
@Paul Cox hey there.
Well I bought a place in Bluefield WV.
Not nearly as rural as I’d hoped.
Very close to Mercer Mall and I460.
But I literally have bears walking into my house and ravaging my apple tree 10 feet outside my door. Deer coons fox everything is in my yard.
No trees really to work like you did. But the homes built.
It just needs finishing. Plumbing’s mostly done. Electric too.
Finishing the Sheetrock now and door shopping.
Thanks for the reply.
Some day I’ll find some trees to play with. 😊
If you’ve ever heard of the bridge to nowhere. I can almost see it from my patio.
And it’s finally getting done. Constant blasting going on. The highway will be a Mecca for 4 wheelers. I hope you get the chance to visit.
My second time watching. Great vid, very easy to understand. For my situation, this type of mill is portable. Thanks for you teaching skills. Congrats on your ambassadorship.
Nice to hear you're back for a second view and have found it useful. Thanks for the support!
watched hundreds of wood milling videos you are the first one I have head suggest using the bark wood for Sidings. here in Scotland when I was a child in the 50s the bark board was widely used for lots of projects. indeed, it was probably the most used lumber of the working class.
Even though bark itself is super whether resistant, the problem with using it for applications where it's exposed to weather is that it causes water retention between itself and the wood it's attached to, causing the wood to rot faster.
Nice use of the Egyptian technical skill set at the beginning! My personal go to method since I'm always working solo. Brute force works if your a brute! So since I'm not on the Brutish side of things
I have to go Egyptian quite regular! Work every time
Great video, end plates and square tube make squaring up very easy. Love the simplicity of the setup. Really well done mate.
,I just got a 066 in outstanding shape. I specifically got it for milling and am super stoked. Thanks for the great video.
Our pleasure, have fun with the new 066!
@@lureofthenorth there is no new 066. They are discontinued
Well described, very clear description of doing the work. Thank you!
Bueno quiciera saber como y que agrego a la motosierra para que funciobe asi
just borrowed a friends mill, about to start milling my first logs tomorrow. Your overview was quite helpful in learning the basics!
@@abc20914
thanks for the advise.
I got sick of filing chains and I'm a machinist , so I've built a pretty nice sharpening machine, no files needed, gives a factor grind a run for its money.
as for the chain, no its not technically a ripping chain. But it is skiptooth and since its been with me, I've changed from the existing 30deg grind, to a 15 degree. I know some people go as low as 10, and I might still just to try it. But 15 seems to be a good compromise of feed pressure & durability. I'm guessing by 90, degrees, you meant 0? That seems really extreme to me, as does completely removing the depth guides. Whats the advantage of going from where I'm at, to the extremes you outlines? I'm pretty new to this, so I'm all ears. Keep in mind, I'm working will borrowed equipment, though I'm sure he too would welcome any improvements that could be made.
@@abc20914 haha..thats a bit of a loaded question right now, I'm in the midst of figuring that out. So far, the logs I know have been maple, elm & willow. Another one I am trying to ID might be Mulberry or Sassafras, not sure though.
oh and I just found out the person whose equipment this is, has a previously used chain that he had dis guarded after hitting some metal. I'm gonna try to get that from him & play around with some stuff.
You notice any difference in finish / quality of cut with different sharpening angles?
@@abc20914 I'll check it out, thank for all the advise.
Great idea on the rail system going to borrow that for mine... Thanks for the post
I just started doing this myself. You have no idea how much time your tricks will save me. Actually, you probably do
Had a few questions about the end plates and rails, so here you go!
5/32" x 2" x 2" steel tubing, bought locally.
The end plates are 1/4" x 12" x 5". The notches for the rails are about 1-3/4" deep so that the 2" rails sit a bit proud. These were cut locally by a metal fabricator.
Consider getting "offset" end plates of different heights (eg. 1 at 5", 1 at 10") if you are going to be cutting heavily tapered logs, like butt logs with lots of flare.
Lure of North:
Please share your contact detail. I have good proposal for supply of variety Softwood in Round Logs and Cants supplies to Asian Region. Mine is: +233 550 753 195 (Cell) and +92 310 214 9796 (Whatsapp) while Email: info@kbocl.com
Thanks and stay in touch please.
Najam
KB Overseas Co Ltd
Ghana (West Africa)
Karachi, Pakistan
Really nice set up. I just started milling smaller logs.How long are your rails?
@@hawkeyeshawkeyes7468 I think they're about 14'6" to mill up to 14' logs. I may not have shown in the video, but little stopper bolts in the end prevent the rails from sliding out of the plates if milling on an incline.
@Smokey Bear The boards went right from the mill up onto the building with no additional processing required. Aside from a negative outlook, what made you think the boards weren't accurate?
I have found much success putting a half inch or 3/8 inch cable between two trees and then using cheap Walmart come alongs to move very large logs into my work area.
What a beautiful piece of timber.
I've just purchased a Granberg Mill. I like your very smart way to get that log up on your saw horses very nice
What an eye opening project, keep up the good work Buddy👌👌👌
Wonderful seeing someone young enough to handle big wood with a big saw. Really enjoy watching your content.
Thank you, I think I'm nearing the tipping point where I won't get described as young for too much longer, so I appreciate it!
I’m even younger and can handle even bigger wood 🙃😏
Must resist inappropriate joke...
@@kylegriffiths8599 Yeah but... Don't you ever get splinters? And a better question, how in the hell do you get up in there to get 'em out?
I loved how you uploaded the trunk on top of the video for you from Western Macedonia Greece Florina and here we have the same and alaska cold rain snow, all good but i'm glad you with your house the sticks your chainsaw stihl nice you have your life.🇬🇷👍🌨️
I've had idea like this for a while but have wanted to see what others have done. Your setup could easily be adapted for logs almost anywhere. Great vid.
Yes, an advantage of the Alaskan Mill 😊😊😊
Your cat is a Bobcat!
This is one of the better vids. No nonsense. Like the way you squared it up. I like most ppl want to know how/where do we get the "set up?
Any metal supplier/ fabricator should be able to provide. Specs are in the video description!
could you send me the drawing of the plates? what you made is better than I have seen. and simple and easy to use. I have watch it several times. love it thanks for shearing it
Shared this video on Facebook. The first comment noted that this looks like a lot of work. Hard work for sure. Plus, a lot of pride. Well done.
Thanks Rick, we appreciate your continued support! Yes, a lot of work, but incredibly rewarding!
Yeh most people now a days afraid of hard work....
Subscribed in the first minute. Well done with the ramp setup.
I was more impressed by the weight those saw horses held!
@@iisreset i was thining the same...lol
Yes sir I agree. Now I know how to set mine up better
Screw your live edge boards to the side of the cant and edge them. Great stuff. Good to see.
Thanks for taking the time during your work to make this video.
I have never seen so much faith in little 2x4 saw horses
2:23 I didn't read through all the comments to see if someone already mentioned it, but fats will dissolve tree sap. If you want to un-glue your tape measure, slather some cheap vegetable oil on it, or if it's more convenient some of your bar oil.
Растительное масло высыхает, становится липким. Наверное, лучше машинное или лампадное...
Hi Patrick, thankyou for that information. Its everything I need to fab my own plates.
Even though I have an old log cabin, I'm not as comfortable in the cold as you obviously are.
Thanks again and take good care of yourself out there.
Cheers
Steve, ottawa canada
could you share dimensions please
@@ianpitts8582 hi Ian, as I recall , the rails are 2" square stock @13 ft. Long and the 2 end plates are 1/4 inch sheet stock. I didn't recall seeing any more detail than that but as for fabricating the end plates, im sure its fairly straight forward. I havnt fab-ed mine just yet.
Good luck
I Love the Singing Birds in the back ground !!! There all but gone in the UK now ! From whhen i was a kid back in the 60s ..... So sad
I got the same set up. Really like the simple and strong set up for the first cut. Much better then mine. Will have one of those built. Thanks
What is that guide rail system? Homemade?
Thanks for the wonderfully informative video! Feeling far more confident about giving one of these a try!!
At 11:48 Nice catching for the cat with a mouse in his mouth. 😅👍
.. and nice video , I like the use of square guides.
I can't wait to forward this to my 50yr old baby boy... It was really great!!!
I do the same thing I let the saw idle for cool down. I ordered the hand crank And longer rails for my mill from Bailey's It's Ben 5 months back order I'm still waiting Great tip with the square
Nice video mate and the songbird soundtrack is perfect.
Enjoyed your presentation. On to #2 video.
Love the rail support brackets. Any chance you can share the rough dimensions and guage of steel used ?
Gauging by thumb ratio (@ 4:54) and 'grunt factor' (@ 5:15) I'm guessing 2" x 2" x 1/8 _(0.125")_ wall, x 12 ~ 15 feet.
@@Dr_Wrong surviving ringworms newest video gives a guide to make them, he has had them for years!
@@tylerroddick3877 don't you just get a mommy ringworm, and a daddy ringworm, and give them some ringworm booze?
That's how I'd make 'em..
20' aluminum extension ladder for rails has served me quite well for over 20 years. started out with steel like you.
Great idea!
as with most rails, use what ever means to support the middle so the weight of the power head doesn't cause a sag on a long first cut. I use standard chain(chisel ground round as well) back in my start the milling of the chain cutters were hardened by way of design. hand file was useless@@SpringRubber
First 60 seconds = total beasts! Awesome teamwork.
I bought my mukluks pattern and hide from you guys a while back...they turned out great ..double soles bison and moose and I made them larger to accommodate the beaver fur liner...lol great vid Thanks
WOOD BUTCHER
Great video. Love the set up of the sawmill. Almost fool proof.
Newbie. Love this video. Really helpful. Thanks.
Man you could really use a good table saw. I think that bird is trying to get your attention. Very nicly done I'm impressed. Thanks for sharing. ✌out
what if you had no power for a table saw? A good saw for that is 220 60 amps, or 3 phase. If not they bind and kill you.
Like Eric Lewis I was looking for the like right away. The lady helper doesnt hurt,
Good help like that is hard to find in the woods. ;)
Bird got the cats attention. Lol.
@@erlycuyler 11
Thank you for sharing, I am very grateful
Excellent video, Thank You !
You make that look so easy. Your lumber milling kung fu is strong.
I have the saw part just need rails I'm excited to use after watching you thanks
you can use a ladder
Good video mate and thanks. Spray the first 3ft of your tape measure with spray lube now and again to prevent the tape measure from getting all gummed up like that.
Do they sell those metal brackets for the rails somewhere or you make those?
😅
Φίλε μου δεν χορταίνω να βλέπω το βίντεό σου μου αρέσεις πολύ Φλώρινα Ελλάδα Δυτική Μακεδονία 🇬🇷👌👍
It's probably because I recently watched some videos on them, but I was looking at all that saw dust and thinking you could get a lot of loads in a sawdust stove out of that. Trying to think of how to collect it all. Maybe if you had a tarp down to keep it separated from dirt etc.
Woodworking
Woodworkingcarveing
@@rogerlintner6970 d
From florina Greece 🇬🇷 Western Macedonia 👍 bravo friend 👏 good job
I like how the saw 4-strokes when idling. ; - )
Helps with cooling, I think.
Have heard it’s best to richen out the mix, and run a bit more oil. Is this true? Asking for a two-stroke emergency generator, which will run at a load for up to an hour at a time. Have Maxima K2 oil, and plan to run about 28 to 1.
Sounds like my old 066 love that saw!
By the sounds of that bird you cut her tree down lol
😂
by the sounds of that saw he needs to be wearing some hearing protection
Great video, found your info on rails a ND brackets 👍👍
Great video ! Really helpful. Did you make the plates you use for your first cut or are they bought?
Fantastic video. Very insightful. Thanks mate.
What type of saw sir
I'd like to know who made those damn Sawhorses
did you make the end brackets or buy them? If they are purchased, where from/what are they called? Thanks for the video.
Stephen Robb was wondering the same thing
Alaskan"s do not joke around. This is hard work and a tough and physical lifestyle! For example, this gentleman knows how to get "er" done because he takes pride in a job well done.
Is that saw/brackets&bars set-up your design or is it available somewhere (to buy or get plans)? Good video, clever.
I'd be interested in this as well...
Its a Granberg "Alaskan Mill". The rails are plates were just something bought locally from a metal fabricator
That's a very nice setup and great presentation.
Nice video that sparrow was wearing on me
Greg Brown The birds have to go
@@aubrey6942 lol 👍
I would of shot the damn bird.... I get tired of a aggravating assbird
Awesome :) I seen you video pop up, nice tree ! I love working with wood right from the bush to the saw, just started milling some of my own.
The cat that walks by had a mouse in it's mouth. !!!! LOL Good Kitty
last guy that commented was an ecofreak need to get rid of these people
Great video and amazing to see your girl helping. You don’t see that often
OH Really?
Yes, really
14:10 The money shot. Thanks great video
That was genius getting that log onto those saw horses.
The dog is doing his/her work too, keeping an eye on things...
a good job. Thanks for showing and greetings from Austria. I'am a carpenter here in Austria and i like alaska very much. I would like to see it once
Bro love your way of doing it. I’m doing that someday in my future farm. Good job. Question what stihl model is that ?
I don’t know what he is running... but you will want run something north of 60cc’s. A friend runs a Stihl ms261. Not the cheapest saw in the world. I have only begun to dabble in milling. I have done a few smaller Logs with my Husqvarna 240, which is only 40cc. I’m pushing it to the limit, but it’s fun. This fall I am looking at upgrading. You got to start somewhere! Hopefully this is helpful.
I run a ms 661 and it works great.
I use a Stihl 382, plenty of power in the still 380 series
I've been doing this as a hobby for a couple of years. I use a MS460 with a 32" bar. Works great.
It looks like an 88
thunbs up for the lumber mill cat passing by :)
11:55 to 12:00 you almost was attacked by a huge bob cat man whoooooo close call buddy..
Big John when you live in Alaska, bobcats are pets like house cats lol
@@byronhatcherrealtor4565 Although the mill is called and 'Alaskan mill', I'm pretty sure that's a Canadian bobcat. I can tell by the accent.
Looks like it has a mouse in its mouth. lol
bobcat has bobbed tail. hence the name. that had a long tail. big house cat
Far from being bob cat. As was pointed out already, that cat had a much longer tail than that of a bib cat. I see bob cats regularly here in the mountains that I call home.
Brings back memories of my Alaskan mill. One of the happier ones is the day I sold it and bought a Woodmizer band mill.....ahahaaaaaaa
Can you please tell us what type of saw, bar length, chain and chainsaw holder you use? I would like to do the same thing. Thanks!
He is using a sawmill from granberg.com the saw is STIHL, I suspect 660 or 880 magnum.
i really like your rail system, going to have to copy that
Minute 1:40, that's how the Pyramids were build, mystery solved!
The pyramids were sq rocks . Not logs,lol the piled earh up then pulled the rock over logs as rollers on a conveyor belt work.once stack completed the long task of removing the dirt began. This man is doing a awsome job of using his head to save his back. Bbrains are stronger than brawn.
No way aliens build them. 🙃
Nice working
Where did you get your end brackets?
Read the description
You have way more faith in those saw horses than I would