WHY YOUR GENERATOR WON'T START | OIL SENSOR | Champion Dual Fuel Generator
Вставка
- Опубліковано 11 вер 2024
- Today, I will again be answering the question of why your generator won't start. This time, your generator might not be starting because of your oil sensor.
Here are some additional videos that can also help:
• Video
• Video
Have specific questions you need answered? Email me at billteachesyou@gmail.com
Ignore tags:
champion, champion generator, champion duel fuel, champion won't start, oil sensor, generator oil sensor, champion oil sensor
*Love how quite it is, New **Generater.Systems** maneuverable enough would be better with a little bigger wheel*
Thank you for the post, that's exactly why my Champ Generator did not want to stay running, after unplugging the Oil sensor, the Generator will stay running.
I installed a toggle switch for fast troubleshooting on oil shut down wire
It’s good to pick up one end 3 inches and drop it before starting 😊
Thank you. After going through a list of things I found you. The only thing is I no longer have the oil sensor connected BUT my generator works again. Do you have a video on how to replace the sensor?
Are you from New England?
Ty I need to know where to put the oil in?
I’m in emergency situation I think oil is low because the sensor must cut cut off engine when low
You mentioned the sensor is "real easy to change". It appears to me the engine block has to be taken apart. Am I missing something?
Sorry, that I was late to answer your question. I was in a car accident. I meant that it was easy to disconnect the wiring to the oil pressure sensor all you have to do is disconnected the wiring to the low oil sensor and monitor the oil level. Some generator do not have that feature. If you want to change out the low oil sensor call the Champion help line. They are open 24/7. When you get on the line and it saids that we are closed just stay on the line you will get more options. They are the best customer service that l have ever seen. Bill
Looks to me it just unscrews out of the block. It would be really dumb if the block had to be taken apart to replace a sensor.
Bad or low on oil? Need to check oil first before you condemn the sensor
what type of gas the black max take? E93 or Ethanol free
If your oil sensor is on will your spark plug still spark?
Your oil sensor is not on your spark wire. It is on the engine. Look in your manual in the parts list diagram to see the location of the oil sensor.
Think he meant will it still spark
How do you change the sensor
I unscrewed the oil sensor thingy and the thing fell in and I’m trying to take it back out so I can put it back to normal do you know how I can take it back out
Sorry, I don't know. I would call Champion at 1 877-338-0999. The call center is open 24/7 say on the line and don't hang up. It may say the office is closed but the call center is open. If there is an answer they will have it.
After disconnecting it,wen it’s on,how long will u put it back so they won’t be any damage
You Want to get it fixed But as long as you make sure the oil is not low or ever gets low you will be fine. The reason that there is a low oil sensor, running the generator on low oil can cause catastrophic damage. If you decide to run your generator with the low oil sensor disconnected make sure you constantly check your oil. I would have no problem running my generator with the oil sensor disconnected I constantly check my oil anyway. It is very easy to change the oil sensor. Just order the part from Champion and have someone install it for you. Champion call center is very helpful. If you have any more questions just let me know.
Could you help please… same generador the AVR have 470 mf 250 v and i want to change for 470 mf 450 volt because is 10000 watts… m I right?
Do you have a link to how to replace the sensor mines leaking
oil sensor wire is disconnected from the sensor. How do I bring out the sensor for replacement
Remove engine and sump cover is how
But lift it 3 inches on one end and drop it and try that first 😊
Closed 5500 championship low oil sensor/switch location
I have the 3400 inverter and the video champion sent me is very different then the one I have. I can't find my low oil sensor
Here is my email address. Sent me your contact information. I will call you. The sensor is in the crankcase. I will send you a video from Champion showing where the oil sensor is in the crankcase.