Replace your Pressure Washer Pump
Вставка
- Опубліковано 18 жов 2024
- Buy pump HERE -- amzn.to/2nsyTCc
Although this is on a Ryobi pressure washer with a robin Subaru 7 horsepower engine on the repair that I show will work on anything that is a 4-stroke horizontal engine such as Briggs & Stratton or Kawasaki. The pump is a standard pattern design and is easily removed as shown in the video so you're able to make the exchange of the pump usually within about 30 minutes total time. Sometimes as mentioned in the video the pump likes to stay connected to the engine output shaft but you should get lucky like in my case and it will come right off with no trouble. This repair also will work on Honda, Karcher, Generac, Devilbiss, Campbell Hausfeld, and many other popular power washers. The pump that I used in this video is good for 3000 psi and 3 gallons per minute. I hope this helps you out thanks.
Hey, this was a great video! Seriously one of the best I’ve seen on UA-cam! You explain things extremely well, with lots of great tips along the way!
👍😊
Many thanks for this great DIY. Just about the same as replacing pump on my 10 year old XL 2600 Honda. I do think these pumps require oil change although I got no instructions, bolts, or parts bag of any kind with my pump. I'll run the hell out of it and maybe sell it next year. On the positive side, mine will now blow the chrome off of a Ford bumper. It's a beast, watch your hands!
Ryobi are the bomb, I got the Parkside petrol jet wash 208cc 5.5hp 180/220 bar brilliant bit of kit I want a spare pump for mine
😁
The word you were looking for (dissimilar metal corrosion) is galvanic, not caustic. Always a good idea to use never-seize on steel screws going into aluminum, just like you did on the shaft.
I have the same machine (engine and pump) that I inherrited. It hasn't ben serviced for about 7 years. It started up on the first pull so engine is fine. I will replace spark plug, engine oil, and air filter. I will keep using the pump until it fails. in the meantime I'd like to extend its life as long as I can. Do you have any information about changing the oil in the original pump (type of oil, oil quantity, etc.) or any other pump maintenance that I can perform?
Thanks.
Great video! Thanks for sharing.
A Heart Beat I agree.
Very helpful thank you
I just bought the same pump. How are you liking it? Did it hold up after years. Had same issues as you with my old leaking
Still great... Will be doing my yearly pressure wash of the house, garage, RV(3x's yr), riding mower, and charcoal BBQ grill in the next few weeks.. 👍
I just bought one can the oil be changed in this pump????
Did the pump had oil or you needed to put oil in it?
Hi I just replaced my older pump with one just like yours and it works great! But I got a question for you! Did you install the thermal valve on yours because I didn’t see that part! Does it works without it?
Yes, it won't work without the thermal valve the problem is is that when the pump overheats there will be no protection without the thermal valve so it will burn up
You gave an Amazon website not the actual size to ask questions about the pump
00
KEEP THE FAITH AND DON'T BE AFRAID TO PRAY FOR WHAT YOU ARE WORRIED ABOUT. ALWAYS
TRUST GOD'S ANSWER.
I just got the same pump for my washer. I cant tell from looking and you didnt mention it in your video. Does this pump come filled with oil or do i need to fill it? or maybe its an oil free?
halfzware2002 I called the pump mfg/seller on Amazon and they said it had oil in it... To be safe.. Contact them to make sure they are still shipping them pre oiled...
It looks like the new pump is also sealed like the original. How many hours is that pump rated for before it goes bad?
careful using copper no-sieze on what appears to be a machined aluminum on the pump. copper will eat aluminum! use the silver stuff
Hi I have a pump exactly like that .. the number for that pump is ....pw28/2.4b ..I would like to know if I can replace it with a pw24/2.3l..looking forward for an answer.. thanks
Click the link in the description and call the seller...they are helpful
Steel bolts in aluminium needs anti seize
Comment augmenter la puissance
What co. You get pump from
Link is in the description
No gasket? did you say what model is the pump?
Link is in the description
Did you put they key in couldn’t tell
It was built in the new pump
Where is the oil breather plug
this pump isn't vented like the original