Thanks Allen! It’s a cold December evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I’m back in the land of warmth! Big thank you 😄
Thanks ever so much for this very clear, very straightforward video. I fixed the F4 fault following your instructions so I have hot water again for now, but sounds like I need to get it serviced. It hasn't been touched for a few years at all I think. Cheers!
Thanks Allen! It's a cold November evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I'm back in the land of warmth! Big thank you aus Germany Frankrurt a Main
(BTW--No idea what make or model this heater is--but your TS guide got me there!) New apartment (company provided), no hot water when I got here at midnight last night. I spent the morning trying to find the water heater...then found the F4. Looked at your video, 45 ish seconds in you say, "Gas repairman"... oh dandy...is there any gas on the stove, dummy? No? Ok I think I found the problem--they forgot to turn on the gas! Thank you so much!!!! (LOL I almost feel stupid, but then again, I thought all of these heater types were electric--I did not know they ran on gas...) EDIT: Found the gas main, turned it on, and all is happiness now! Thank you for the spot on troubleshooting guide!
Hi Allen, i have a vitroden 100 oil burner, i am getting the F4 error, and saw that the oil tank is very empty, how can i fill more fuel oil and what oil does it use, its so cold in here. Thanks
Done the reset, f4 error disappears for a while but flame icon never appears and f4 comes back. The gas meter guy came to do maintenance on the meter before his happening so it’s connected to that most likely
Spark genny's are notoriously bad on these boilers , it's a design fault and viessman don't seem to have resolved the problem , I won't fit these anymore and I always recommend Baxi's to customers these days , cheers mate......👍
Thank you for the video. Mine is an ordinary (non combi) Viessmann boiler fitted two years ago.. During the summer, I use an electric immersion heater for my water as I don't like the humming of the pump and don't particularly like gas, or water being pumped around. Just switched the boiler on (for heat and water) for the first time in 8 months and straight away got an F4 code. No idea what I was doing and noticed that the on-off switch wasn't pushed in .... It fixed the problem but have now come on youtube for some advice if it happens again.
Also check the if the gas sensor closed the gas shut off valve if you have that. It did not sound, and I did not have a leak, it just shut off because of the dust (the house is still under construction)
Hi Allen, I am worried that if you show things that should be left to an engineer that people will try to do it themselves to save money, I am a hobbyist DIY'er and have built everything from underfloor heating to an entire house, but I will not touch gas because I don't trust it. My worry is that if someone has the same skill set as me but not the nagging "do not touch gas" thing they will try to save money because you have shown them how to sort a problem and that is a dangerous thing to do. By telling them it could just be needing a service or cleaned out they are going to think that they are capable to use a hover and clean it out without the safety of a registered gas engineer.
Hi John, Thank you for your comment, You make a very good point. Lots of manufacturers are doing these types of videos now, hopefully, my advice comes across to always use a gas engineer. Thanks.
Thanks Allen! It’s a cold December evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I’m back in the land of warmth! Big thank you 😄
Thanks ever so much for this very clear, very straightforward video. I fixed the F4 fault following your instructions so I have hot water again for now, but sounds like I need to get it serviced. It hasn't been touched for a few years at all I think. Cheers!
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Thanks Allen! It's a cold November evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I'm back in the land of warmth! Big thank you aus Germany Frankrurt a Main
Jesus Christ, my mum knocked the gas lever and we were wondering why after couple of resets it didn’t work. Thank you so much!
Thanks Alan turning off/on cured it short time...but contacted the engineer....as you recommended
You saved my problem. It was condenzating water. 😊
(BTW--No idea what make or model this heater is--but your TS guide got me there!) New apartment (company provided), no hot water when I got here at midnight last night. I spent the morning trying to find the water heater...then found the F4. Looked at your video, 45 ish seconds in you say, "Gas repairman"... oh dandy...is there any gas on the stove, dummy? No? Ok I think I found the problem--they forgot to turn on the gas! Thank you so much!!!! (LOL I almost feel stupid, but then again, I thought all of these heater types were electric--I did not know they ran on gas...) EDIT: Found the gas main, turned it on, and all is happiness now! Thank you for the spot on troubleshooting guide!
Hi Allen, i have a vitroden 100 oil burner, i am getting the F4 error, and saw that the oil tank is very empty, how can i fill more fuel oil and what oil does it use, its so cold in here. Thanks
Thank you so much for a simple explanation.👏👏👏
Reset as mentioned and it worked and fired back up! Thanks for this.
Saved my bacon on christmas eve, looks like it was the condensate pipe for me. Thank you and merry christmas to all.
Happy to help.
Brilliant did the reset and worked straight away. Thanks
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Allen Lifesaver Hart! God Bless You!
Thanks very much for your comment, please consider subscribing to support the channel 🙂
It worked and save me a few quid. Thank you
I have this boiler and it’s showing F4 but have 0 pressure. Any ideas? Thanks.
At these frozen nights your video becomes my heat source, thank you very much. I hope u like my coffee. 😉
Thank You so much.
Thank you so much for saving me, the wife was cold and I was getting no where until I checked a couple of your videos: saved my bacon.
Thanks very much for your comment, please consider subscribing to support the channel 🙂
This was helpful. Thank you!
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Hello, do you know how to raise the water pressure?
ua-cam.com/video/9v9YXRXe3sk/v-deo.html
Thank you for this video :)
My pleasure!
Thank you are an Angel!
Happy to help!
Thanks Allen sorted 😊👍
Done the reset, f4 error disappears for a while but flame icon never appears and f4 comes back. The gas meter guy came to do maintenance on the meter before his happening so it’s connected to that most likely
Thank you only needed 1.49 minutes
Many thanks, just resetting it fixed it!
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Nice one thanks Allen
Thanks.
Spark genny's are notoriously bad on these boilers , it's a design fault and viessman don't seem to have resolved the problem , I won't fit these anymore and I always recommend Baxi's to customers these days , cheers mate......👍
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Thanks, very useful
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Works perfectly now. Thanks allen
Great to hear!
Thank you for the video.
Mine is an ordinary (non combi) Viessmann boiler fitted two years ago..
During the summer, I use an electric immersion heater for my water as I don't like the humming of the pump and don't particularly like gas, or water being pumped around.
Just switched the boiler on (for heat and water) for the first time in 8 months and straight away got an F4 code.
No idea what I was doing and noticed that the on-off switch wasn't pushed in .... It fixed the problem but have now come on youtube for some advice if it happens again.
A friends Boiler was showing the f4 fault code.
His spark electrode was so bad it was warped. A new electrode fixed the issue.
Thanks very much for your comment, please consider subscribing to support the channel 🙂
had the f4 fault and it was just the propane ran out on one of the bottles,so i switched it...scared shit out of me lol.
The problem with F4 i fixed but after few days i got this problem when the boiler starts give me the error 0E. Can somebody help about this one?
Cheers mate love these videos 👍
Thank you.
I think this was the error code that we were seeing about a year ago (new boiler). Viesmann put in a new board and the problem went away.
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Decent thanks
Thanks very much for your comment, please consider subscribing to support the channel 🙂
...block internal condensate pipe can also result in the F4 code...
Thanks very much for your comment, please consider subscribing to support the channel 🙂
thhhaaaannnksss :)
its work !
Happy to help, Thank you very much for watching.
Spark generator on pcb
Thank You
Also check the if the gas sensor closed the gas shut off valve if you have that. It did not sound, and I did not have a leak, it just shut off because of the dust (the house is still under construction)
Thanks very much for your comment, please consider subscribing to support the channel 🙂
On peut traduire ça en français comment
why the fuck does my NEW boiler have this fault? thank you tho!
Hi Allen, I am worried that if you show things that should be left to an engineer that people will try to do it themselves to save money, I am a hobbyist DIY'er and have built everything from underfloor heating to an entire house, but I will not touch gas because I don't trust it. My worry is that if someone has the same skill set as me but not the nagging "do not touch gas" thing they will try to save money because you have shown them how to sort a problem and that is a dangerous thing to do. By telling them it could just be needing a service or cleaned out they are going to think that they are capable to use a hover and clean it out without the safety of a registered gas engineer.
Hi John, Thank you for your comment, You make a very good point. Lots of manufacturers are doing these types of videos now, hopefully, my advice comes across to always use a gas engineer. Thanks.
Hi Allen.
F4 fault. I have changed the electrodes,leads and pcb(as advised by viessmann) and still f4. No issue with gas 22mbar. Any idea?? Thanks.
For me, it was "no gas"
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Türkce nasıl anlaya bilirim
Thanks