Thank you for this vid. I used a 5 inch glass lid in the door of my stove build and wouldn't have thought of it but then I saw your vid so thank you again for the idea. It works great!
Ive been thinking of making one of these but didnt know where to get glass from. Love the saucepan lid idea but didn't think they would be up to the temperature? Great build
I made a lot of similar wood burning stoves and what happens over time is that the flat area where pots are used sags over time so to rectify this I used 12 ml rebar under the flat area to strengthen it, spacing each bar by about 100 ml.
Nice work! As a sheet metal worker that hand brake you made is dope. But if you do your bends in the other order you wont have to take apart the clamping part when removing your piece
Muchas gracias, muy buena idea. También le agradezco el filtro luminoso para no quemarnos los ojos en los momentos de soldadura. Un buen detalle, gracias.
It is art, in a way, you know, apart from spirit of respect to the environment. Many congratulations, just wish i had one, too! Also, get yourself a dutch oven, to put, instead of that glass pot, many greetings! I wish a great creative year!
@saschabaylyak4320 Привіт, кришка каструлі витримує температуру до 700 градусів Цельсія. Я зробив цю плиту зі старого 13-літрового газового бака, ви можете зробити його з більшим баком.
@@CreativeCementIdeas Дуже дякую за корисну відповідь,так хочу трошки більшу.Тільки думаю,що ліпше газовий балон,чи бак із під бойлера,яка Ваша думка?І взагалі ,що це за матеріал з бойлера,чи має властивість деформуватись.
Your work and design's are excellent but wouldn't it be easier to weld up with a mig new sub going to make one of your wood cook stoves thanks for sharing what is your location
Be careful cutting up old tanks! My neighbor's brother hospitalized blowing a leg off!! After seeing what tank did too neighbor's brother, rinse tank twice for good measure!
Merci pour votre compliment, il s'agit d'une solution de décapage spécialisée, vendue de manières nombreuses et variées dans les magasins de peinture, merci de vous y référer.
@taylorbrad111 I believe you will be happy to enjoy your nearly finished stove top meal, and the pot lid just requires you to avoid contact with water while the pot lid is still hot.
Curious many cut off wheels you blew up cutting and grinding on the left side of the grinder ? Made me cringe watching it but super cool stove project! I may have to make one.
Muito interessante!! Mas, acredito que teria melhor aproveitamento se houvesse uma abertura, ((boca) pra labareda incidir diretamente no fundo da panela. Pois aquecer a chapa de metal e dela passar pra panela se perde muita energia. Mas a idéia é muito boa. 🇧🇷
@mikeanaba518 There are many types of paint remover, including paint remover on wooden floors, you should go to the store to get advice from the staff.
@@CreativeCementIdeas Thank you for telling Rob,…so patiently…the obvious. I would’ve added a cheerful (but loud) DAAUUH for better effect…but that’s me.🤓 Love your work, BTW.
Great design! But do I really need to cut away so much metal from the top, to make a flat surface for cooking? How about if I weld a piece of sheet metal to the cylindrical top instead? Would that work too?
@@CreativeCementIdeas Okay, thanks for answering. It seems difficult to make it the way you did, but I'll try. It would be nice to cook on it, not just use it for heat.
Thank you for this vid. I used a 5 inch glass lid in the door of my stove build and wouldn't have thought of it but then I saw your vid so thank you again for the idea. It works great!
Brother that is the sweetest tank stove ever. Yours is the one I will duplicate. Great Job.
I'm glad you want to copy this stove, good luck!
I'd buy one of these sweet little portable cooking stove.
Pa to je posao za vrhunskog majstora koji ima znanje i radionicu da dobrim alatom, amateri to ne pokušavajte.
Ouystanding !!!!! best I've seen yet.......
Thank you very much
That is awesome. Very cool design and nicely done.
Thank you very much
Absolutely beautiful love the design. Thanks for the video.
Ive been thinking of making one of these but didnt know where to get glass from. Love the saucepan lid idea but didn't think they would be up to the temperature?
Great build
Hello, this pot lid can withstand temperatures up to 700 degrees Celsius, but you must avoid water when it is hot.
Beautiful work , Bravissimo
Grazie mille per il complimento
That's badass! Such skill!
Excellent job. Great art piece❤🎉
Thank you very much
I made a lot of similar wood burning stoves and what happens over time is that the flat area where pots are used sags over time so to rectify this I used 12 ml rebar under the flat area to strengthen it, spacing each bar by about 100 ml.
I am very happy for your sincere feedback, thank you very much, wish you good health and happiness
Rhats really cool !! Nice! Love it !
Thank you very much
Total beauty, thanks for sharing!!!
Nice work! As a sheet metal worker that hand brake you made is dope. But if you do your bends in the other order you wont have to take apart the clamping part when removing your piece
Thank you very much,
Love ❤ from 🇮🇳🏹🎯👍
I love the lid idea on your wood heaters
Thank you very much
Hands down one of the best simple little stoves I've seen made! Now gonna try making one with my son, was just wondering what welder/sticks you used?
Thank you very much, I use mig welder, and use 2.5 and 3.2mm welding standard
Keep on creating and adding values!!
❤👍
I love the homemade box and pan break. I never thought of making one like that. It's a pretty neat little stove.
Très jolie et original avec le hublot 😊
Merci beaucoup
Ohhh, generally it's difficult to make it, only skillful can make it. It's 👌👌🙏.
Muchas gracias, muy buena idea.
También le agradezco el filtro luminoso para no quemarnos los ojos en los momentos de soldadura. Un buen detalle, gracias.
This is great work❤
Picture is good 👍 what caméra you utilse please?
It is art, in a way, you know, apart from spirit of respect to the environment. Many congratulations, just wish i had one, too! Also, get yourself a dutch oven, to put, instead of that glass pot, many greetings! I wish a great creative year!
Thank you very much for your sincere words
Where did you get the glass door ? Is that a pot lid ?
Hello, it's a pot lid
@@CreativeCementIdeasяку температуру витримує.
Балон на скільки літрів?дякую.
@saschabaylyak4320 Привіт, кришка каструлі витримує температуру до 700 градусів Цельсія. Я зробив цю плиту зі старого 13-літрового газового бака, ви можете зробити його з більшим баком.
@@CreativeCementIdeas Дуже дякую за корисну відповідь,так хочу трошки більшу.Тільки думаю,що ліпше газовий балон,чи бак із під бойлера,яка Ваша думка?І взагалі ,що це за матеріал з бойлера,чи має властивість деформуватись.
Great job, their's just some people that think at another level. I will never throw my pot lids again.
I was about to mention the use of an old glass pot lid. What a genius idea
Лайк однозначно!👍 ибо сам такие вещи делаю, знаю толк.
You got skills, that was very cool. Thanks for sharing, if there’s ever a grid down you will have no problem heating up some food. Shalom
Thank you very much
Spoko pomysł👍,efekt końcowy Super 💯👍
Bardzo się cieszę z Twojego komentarza, dziękuję bardzo
Do you think this with a bit of customization would work well for a sauna? Really nice project, well done mate!
Thank you very much
Alte Schule, gefällt mir 👍
Brilliant.... !!!
Thank you very much
Congratulations!! Thanks!
Good job‼️
Thank you very much
Great Work 🔥👋
Thank you very much
Great work.
Thank you very much
Absolut Cool, und viel Geld gespart!!!!!
Vielen Dank
Hey - just curious what did you use for the chimney pipe?
Your work and design's are excellent but wouldn't it be easier to weld up with a mig new sub going to make one of your wood cook stoves thanks for sharing what is your location
Great work mate, what size flu did you use please.
Hello, that is an old glass pot lid.
Ingenieux 👍👍👍
Merci beaucoup
I made a similar stove without the ash tray and glass door.
Works great too!
Great looking stove but i can't help but think that the door doesn't close perfectly and smoke may come out
Hello, when the stove is burning, the combustion chamber is always lacking air. Even if the door is slightly open, no smoke can escape.
What size is the container/cylinder that you’re using in this video?
Your craftsmanship is amazing. I could watch these videos all day long.
Thank you very much, that old gas tank's size is 40x 30cm
Merci et surtout bravo pour le coup du couvercle de casserole !!! ... :Q)
Merci beaucoup, je suis très contente du compliment
nice stove :-)
Thank you
Be careful cutting up old tanks! My neighbor's brother hospitalized blowing a leg off!! After seeing what tank did too neighbor's brother, rinse tank twice for good measure!
super vidéo merci
C’est quoi la pâte que tu mets sur la bouteille pour retirer la peinture c’est excellent ???
Merci pour votre compliment, il s'agit d'une solution de décapage spécialisée, vendue de manières nombreuses et variées dans les magasins de peinture, merci de vous y référer.
@@CreativeCementIdeas ok merci mon ami je vais me renseigner ! Good job 😎👍🏼
Very nice, inspiring
Thank you very much
Top job
Thank you very much
What type of welder did you use?
Good choice of material, propane can's are strong.
The door doesn't have a seal, so it's only good outdoors.
Hello, when the stove is operating, there is always a lack of air inside the combustion chamber, so smoke and dust cannot get through the door gap.
Muy bonito trabajo 👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏🥇
Muchas gracias
Bardzo pomysłowe i efektowne wykonanie.
Dziękuję bardzo
Using a tempered glass sauce pan lid for a window is ingenious.
Thank you very much
That is a neat sheet metal bender
Thank you very much for your feedback, in my channel there is a video about making a sheet metal bending machine for your reference
Bravissimo !!!!
Grazie mille, sono molto felice per il tuo complimento
Very good!
Thank you very much
Việt Nam❤
Looks great
Thank you very much
WAUUUU! 😮 👍💪
На варочной поверхности,надо было сделать отверстия под кольца.Для чайника или сковородки.Лайк однозначно.
Большое спасибо
My favorite! Grilled paper towel! How did you know?
You are amazing, thank you so much
What did you put on there to remove paint?
Hello, it is a paint remover, available in many and varied varieties at paint stores
@@CreativeCementIdeas thank you sir, loved that project.
Bravo meseriasule.
Mulțumesc foarte mult
How can I get this product?
Nice job
Thank you very much
Muchísimas gracias por tu ayuda bendiciones del cielo para ti y los tuyos que
Muchas gracias
Nice design! I'd like to see one like this with rocks on top, to create steam to use in a sauna.
Thank you for your idea
@@CreativeCementIdeas Please try making one in the near future. Thanks 😊
Very good nice
Thank you very much
How's the glass hold up to flames????
Hello, this pot lid is fireproof glass, it can withstand temperatures up to 700 degrees Celsius
@CreativeCementIdeas I started this project today but not sure about my lid.
@taylorbrad111 I believe you will be happy to enjoy your nearly finished stove top meal, and the pot lid just requires you to avoid contact with water while the pot lid is still hot.
What was that you used to remove paint from gas bottle!?
Hello, it is a paint remover, available in many and varied varieties at paint stores
Wow 🔝
Brilliant, didn’t think the pan lid would stand up to that kind of direct heat..🖐️
Hello, this pot lid can withstand temperatures up to 700 degrees Celsius, you can try it
C'est super sympa ! Qu'as-tu mis comme vitre sur la porte ?
Bonjour, c'est un vieux couvercle de pot
Tencere camı patlar mı ?
@enesulupnar8237 Merhaba patlamaz, cam tencere kapağı 700 santigrat dereceye kadar sıcaklıklara dayanabilir
Hola, tengo una garrafa de 45 para hacer una de esas, está lavada una sola vez y está abierta hace 1 mes, sabrás decirme si sigue siendo peligrosa.
Hola, solo necesitas quitar la válvula, llenar el tanque con agua, luego dejar salir el agua y cortar, todo es seguro.
You should try this when the bottle is full of gas because you will have a better effect.
Moron 🙄
10/10 for design but run a bead of weld much better results instead of stop start
Thank you very much for your sincere comments and suggestions, wish you health and happiness
Cái này bác bán bao nhiêu vậy, em muốn mua ạ
I really like your film. Is the glass front made from a saucepan lid?
Thank you very much
Looks like it. Going to explode one day.
Hello, this glass pot lid can withstand temperatures up to 700 degrees Celsius, but you must avoid water while it is hot.
@@CreativeCementIdeas most pot lids go up to 150C. Where did you get this lid from?
Hello, according to the manufacturer's information, the glass pot set can withstand temperatures up to 800 degrees Celsius.
Desconocia que la tapa de una olla,fuera tan resistente al fuego..te ha quedado muy bien.
Hola, la tapa de la olla puede soportar temperaturas de hasta 700 grados centígrados.
Eine gefüllte Gasflasche kann man auch in den Ofen schieben ( wenn sie rein passt ). Der Ofen muss dann beheizt werden, das wird herrlich.
Curious many cut off wheels you blew up cutting and grinding on the left side of the grinder ?
Made me cringe watching it but super cool stove project!
I may have to make one.
Thank you very much for your compliments and reminders
Muito interessante!! Mas, acredito que teria melhor aproveitamento se houvesse uma abertura, ((boca) pra labareda incidir diretamente no fundo da panela. Pois aquecer a chapa de metal e dela passar pra panela se perde muita energia.
Mas a idéia é muito boa. 🇧🇷
Muito obrigado pela sua opinião
Wow, I really could use that little stove in my van build, how much do you charge to build one?
Thank you so much for liking this product
Do you make and sell your products?
@angelg.c.johnson8937 Thank you, this video only shows how to make your own wood stove, I do not sell it
What chemical did you use to clean the pain on the cylinder?
Hello, it is paint remover, this paint remover is sold at all paint stores, they have many types, please consult before buying.
@@CreativeCementIdeas I wish you can tell me the name, I do use thinner but it's not giving me a perfect finished job.
@mikeanaba518 There are many types of paint remover, including paint remover on wooden floors, you should go to the store to get advice from the staff.
I want one !
Outstanding
Un satélite 😮
From nasa
👏👍👍👍
Want it ❤
Where does the heat resistant glass for door come from ?
Hello, it's an old pot lid
@@CreativeCementIdeas
Thank you for telling Rob,…so patiently…the obvious. I would’ve added a cheerful (but loud) DAAUUH for better effect…but that’s me.🤓
Love your work, BTW.
Buena idea .😮
Would you build and sell?
Great design!
But do I really need to cut away so much metal from the top, to make a flat surface for cooking? How about if I weld a piece of sheet metal to the cylindrical top instead? Would that work too?
Hello, if this heater is made the way you do, the top surface will only heat up, not cook.
@@CreativeCementIdeas Okay, thanks for answering. It seems difficult to make it the way you did, but I'll try. It would be nice to cook on it, not just use it for heat.
@Verradonairun It's great when your product is completed, wish you success
Thank you, Sir! @@CreativeCementIdeas
What chemical are using to remove the paint?
Hello, in paint stores there are many types of paint removers sold, please refer to them
Awesome
It will be a better video if you use natural sound of the recording instead of any of that music
Thank you very much