Great instruction video, just did the job, one thing I’d like to mention, as an extra peace of mind security measure, cut out a piece of cardboard to the same dimension of the filter and place under the old one before removing to prevent debris from falling into the blower fan, than tilt upwards and out towards you and remove the cardboard before inserting the new filter.
I would like to know how to change flood lights on the newer models you can't get to the driver one through the inner fender wall to be able to access it easy because the newer ones are round and they're closer to the center of the bumper
So on the 23 models specifically I kinda accidentally found another way if you slightly lift up the plastic trim/hood cowling you can get it from the hood it's not recommended but I was able to do it was a massive pain tho
Great job Stellantis. I replaced a cabin air filter on a Hyundai the other day and you pull the glove box open and pop open the access door and bam cabin air filter slides out and you slide the new one back in. It's so fast and simple you could probably do it drunk and high with a blind fold. But this. This is typical 21st century BIG 3 dumbfkery. Pull out part of the dash and remove the glovebox entirely just to get to a panel you have to also unscrew before replacing the filter. Then put it all back together again. Good job guys. You sobs couldn't close an umbrella 👌😑
So on the 23 models specifically I kinda accidentally found another way if you slightly lift up the plastic trim/hood cowling you can get it from the hood it's not recommended but I was able to do it was a massive pain tho
Sounds like a lifetime cabin filter to me!
Great instruction video, just did the job, one thing I’d like to mention, as an extra peace of mind security measure, cut out a piece of cardboard to the same dimension of the filter and place under the old one before removing to prevent debris from falling into the blower fan, than tilt upwards and out towards you and remove the cardboard before inserting the new filter.
great teacher !!- Where is the oil dip stick ? 2021 renegade. , how do i know if its a turbo or not- auto zone sold me the wrong air filter !! thanx
the cabin filter should be the same regardless of turbo or not
excellent instructional video. made it much easier. Thanks
You're Welcome!
I would like to know how to change flood lights on the newer models you can't get to the driver one through the inner fender wall to be able to access it easy because the newer ones are round and they're closer to the center of the bumper
wtf were they thinking.
This actually is one of the easiest to replace in my opinion but I get what you're saying
@@whitelavarballnah I have a civic and there’s two tabs inside the glove box I push in and the glove box falls down. No need for screws or anything.
I did my Tacoma in the autozone parking lot with no tools. This is bad.
This was so helpful. I did this on my own 😊😅
Nice!
So on the 23 models specifically I kinda accidentally found another way if you slightly lift up the plastic trim/hood cowling you can get it from the hood it's not recommended but I was able to do it was a massive pain tho
Thank you very much for this video…it is most appreciated.
You're Welcome!
Super great video to the point ans easy to understand 10/10
Thanks!
Great job Stellantis. I replaced a cabin air filter on a Hyundai the other day and you pull the glove box open and pop open the access door and bam cabin air filter slides out and you slide the new one back in. It's so fast and simple you could probably do it drunk and high with a blind fold. But this. This is typical 21st century BIG 3 dumbfkery. Pull out part of the dash and remove the glovebox entirely just to get to a panel you have to also unscrew before replacing the filter. Then put it all back together again. Good job guys. You sobs couldn't close an umbrella 👌😑
Thanks for your totorial , greetings from germany 👌💪
You're Welcome!
That's what I'm talking about I don't see me changing mine either
So on the 23 models specifically I kinda accidentally found another way if you slightly lift up the plastic trim/hood cowling you can get it from the hood it's not recommended but I was able to do it was a massive pain tho