I did the same thing because I had two M365s, but I put the second controller where the battery is normally installed and stuffed the two batteries in a bag attached to the seat actually really unnecessary because I use both at once anyway that I can get much faster but not really further despite the second battery also my scooter is now a free ticket for a court hearing as soon as I'm stopped. You can do it if you're bored and want to prove it that works 🤣
Can i ask you where did you find the peace that you put to the weel for the front disc brake ?? and if i can to extend the power of controller to give more power in the motor
The reason is that he used one controller which is supposed to be two to power both hub motors and not only did he use a single controller, he used a very weak controller. If I'm not mistaken on my estimate that controller should be in the range of 10 amps to 14 amps of power out, even worse that it is at 36volts A modification like in this video with proper/adequate components can hit easily above 50km/h
bro! dont need to used to panel board .. there are some tricks in wirings just watch my video for you to show the single finger throttle with dual controllers and dual hub motor
You made a new bracket? Why not use the original bracket + brake calipers on the rear wheel? Ah never mind, I figured it out: 6 hole adapter plus larger discs, original 5 hole disc is only 110mm
Brilliant! You are very skilled.
I did the same thing because I had two M365s, but I put the second controller where the battery is normally installed and stuffed the two batteries in a bag attached to the seat actually really unnecessary because I use both at once anyway that I can get much faster but not really further despite the second battery also my scooter is now a free ticket for a court hearing as soon as I'm stopped. You can do it if you're bored and want to prove it that works 🤣
Hello, is it possible to share where can find this small thing for disc extender with holes?
Very creative man!
Do you upgrade the controler? Or using the current one?
Think it’s just one controller that’s y it’s slow lol
he upgraded to a 48 volt
@@sad_clappzy9776 he did not in this video.
Sir how did you connect the LCD display without error 10 i was use that in other scooter but the LCD display is error 10
Can i ask you where did you find the peace that you put to the weel for the front disc brake ?? and if i can to extend the power of controller to give more power in the motor
Hola qué tal?
Saan po kayo sa pilipinas?
What the size of brake disc adapter?
6 holes and 44mm or 48mm?
why you have double display lcd why not one ?
can you use ONE motor som Generator to load and the other for drive? so have you more options.Speed if you need and load for higher Range..
Boss ano ginamit mo na spacer dyan sa rear motor mo at ano din ginamit mo para makapagkabit nang disk brake sa motor salamat sana mapansin boss
Do you have a page I can reach. I'd like to dual hub my scooter.
Put some 10 inch tyres on the wheels to make it higher...
You need 10 “ wheels yes or yes
Also you need from suspension and the best is rear suspension tooo
Hmmm it’s not adding up. My XIAOMI hits 33kpm with firmware
The reason is that he used one controller which is supposed to be two to power both hub motors and not only did he use a single controller, he used a very weak controller. If I'm not mistaken on my estimate that controller should be in the range of 10 amps to 14 amps of power out, even worse that it is at 36volts
A modification like in this video with proper/adequate components can hit easily above 50km/h
kamusta naman sir? bumilisba or feels like the same?
use dual fsesc instead of common speed controllers
Wow thanks for the info. Just searched for it and it looks interesting
El tornillo de soporte freno se coloca desde el interior y se sujeta con tuercas no con mierda de silicona
Hi! Great job with the front brake disc!👍 Question: which glue did you use to glue the 6-hole adapter? Kind regards.
Pre may shop ka dto sa pinas?
Pano m onapagkasya sa likod yung motor at hub paps? Diba non pro yan?
Good one with the threaded bolt end in the motor, much better than bending in the forks or buying fancy adapters.
😂 no that's stupid as fuck the bolt won't stop the axle from turning instead of the wheel #ignorance
bro! dont need to used to panel board .. there are some tricks in wirings just watch my video for you to show the single finger throttle with dual controllers and dual hub motor
Can you send me a link?
Won't using 1 controller limit the power of both hub?
idol pede e dual motor pero isang motor eh pang pro
You made a new bracket? Why not use the original bracket + brake calipers on the rear wheel?
Ah never mind, I figured it out: 6 hole adapter plus larger discs, original 5 hole disc is only 110mm
Double voltage and battery
Pwede ba isang throttle connection sa dalawang controller?
san mo manili yung diskbreak mo
Like 65 hi friend ☺
super
It needs 10" Tires
To je prasárna 😂
It don’t look that fast bro
Looks slow
Painful video
hina ng boses mo idol
pa fan sign po
After going to all that work you should have upgrade and buy a new scooter🍼 🤣😅😂