Thank you sir! second time i've reviewed your video for this job! Just finished oil change, fuel filters... now cabin air filter, lube the hinges and call it a day!
I don't know how you got that last pin out of there. There are no fingers small enough. I took out the 5 screws and dropped the whole assembly as well. I even had to take off the fuse assembly to get the filter in. My replacement filter was a lot stiffer and not as flimsy as the original Nissan filter. Thanks for posting, though.
I agree with the very right pin was very difficult to access on my 2017 SL. Not impossible though. I used a screw driver to push it out and was able to get my fingers up in there to push it back in. I couldn't get the right side of the filter panel completely off either. But, was able to pull the old filter out with a pick. The new filter(s) that I got on line, was two filters that put together, was the same size as the one old one. That made putting them in easy. Hooking up the tether was a little difficult. If you reach underneath, you can slide the tether mechanism button to the right, to give yourself some slack and slightly close the glove box, to attach the looped end to the hook. This job took me about a 1/2 HR to complete. This video was very helpful for the basics.
This is the way to do it. I wound up braking the right most plastic piece on the glove box because I could find or get the pin out. After I removed all the screws and pulled it all out I glued the broken piece back on. They sure don’t make this easy. I don’t understand why people who design cars make these kind of things so freaking difficult. It’s just asinine and rude.
Tried this first time, pin closest to door flew in behind kick panel. Had to remove kick panel to get it back.. Remove 5 screws with bit on drill. Much easier.
That one tab in the bottom right is an absolute dickens. Needless to say, only 2 tabs got put back in when I replaced my filter, and now I have a spare 😁 Remember, it's not done right unless there's parts leftover!
Easier way to do this is to remove the 5 screws that hold the glove box assy to the dash. You do not have to fight the pins, nor the retainer cable. Just did mine in less than 5 minutes.
Thanks for the video. Here's what I did...F the last clip, left it in the glove box for the next poor soul. For real, how does anyone find replacing the last clip super easy?
Not applied to 2020 Titan Platinum Reserve. Knee airbag is under the box. Removing the five bolts is the only way to replace the cabin air filter or even wire a dash camera to the fuse box.
Does anyone else have problems with the a/c blowing humid air at a stop? I’ve taking my truck to the dealer 3 times an they can’t find the problem. 2018 sv
My friend and I have titans and his was having the same issue that you are having and they were able to fix it at the dealership so my advice to you it's to take it to a different dealership!
This didnt work for me on my 2017. Couldnt get to far right pin, couldnt release the far right snap on filter cover because its so far over, the tether mechanisim came off when reappling tether to plastic hook. I should have all the comments below first.
This is how videos should be made. I like all the little details you give. Precise!
Excellent instructions and video. Appreciate no kooky and unnecessary background music. Thanks.
Yup that's exactly how it worked. It took me about as long as the video was to complete the job. Thanks for the tutorial.
Thank you sir! second time i've reviewed your video for this job! Just finished oil change, fuel filters... now cabin air filter, lube the hinges and call it a day!
I just took out the 5 screws and the whole thing dropped out. No fighting pins because the one by the door is the hardest.
As a lube tech who has done 1000+ cabins before, I thank you. The clips on the bottom was a new one for me 😂
Lots of vehicles use those retainer pins for example 2010-2016 ford explorers all have them
I don't know how you got that last pin out of there. There are no fingers small enough. I took out the 5 screws and dropped the whole assembly as well. I even had to take off the fuse assembly to get the filter in. My replacement filter was a lot stiffer and not as flimsy as the original Nissan filter. Thanks for posting, though.
I agree with the very right pin was very difficult to access on my 2017 SL. Not impossible though. I used a screw driver to push it out and was able to get my fingers up in there to push it back in. I couldn't get the right side of the filter panel completely off either. But, was able to pull the old filter out with a pick. The new filter(s) that I got on line, was two filters that put together, was the same size as the one old one. That made putting them in easy. Hooking up the tether was a little difficult. If you reach underneath, you can slide the tether mechanism button to the right, to give yourself some slack and slightly close the glove box, to attach the looped end to the hook. This job took me about a 1/2 HR to complete. This video was very helpful for the basics.
Great video, man. Super quick, and shows everything a guy needs to know.
Cool glad it helped, Thanks for watching !
Wow you explain everything So clearly. You are a good teacher. So impressed I am going to subscribe.
Its much easier just to remove the 5 screws and take the whole panel out had mine done in like 10 minutes total !
This is the way to do it. I wound up braking the right most plastic piece on the glove box because I could find or get the pin out. After I removed all the screws and pulled it all out I glued the broken piece back on. They sure don’t make this easy. I don’t understand why people who design cars make these kind of things so freaking difficult. It’s just asinine and rude.
@@rondadams That can be said for any car or truck made in the last 20 years.
Tried this first time, pin closest to door flew in behind kick panel. Had to remove kick panel to get it back.. Remove 5 screws with bit on drill. Much easier.
Lovely stuff! Thank you, I found it very helpful. Cheers!
Buen video, necesito más vídeos del Nissan KICKS porfavor
The 2020 Titan SV has an airbag under the glovebox door, preventing access to the hinge pins...
Great video! Thanks man!
Thanks!
That one tab in the bottom right is an absolute dickens.
Needless to say, only 2 tabs got put back in when I replaced my filter, and now I have a spare 😁
Remember, it's not done right unless there's parts leftover!
Good video. Thanks!
Easier way to do this is to remove the 5 screws that hold the glove box assy to the dash. You do not have to fight the pins, nor the retainer cable. Just did mine in less than 5 minutes.
Nicely explained, thank you !
Thanks for the video. Here's what I did...F the last clip, left it in the glove box for the next poor soul. For real, how does anyone find replacing the last clip super easy?
Agreed. Did the same thing. Barely able to get the pin out. Tried to reinstall, no luck.
Great video!
My 2020 Does not look like this. Anyone have a video for a 2020-2021?
Not applied to 2020 Titan Platinum Reserve. Knee airbag is under the box. Removing the five bolts is the only way to replace the cabin air filter or even wire a dash camera to the fuse box.
Nah rest of us are poor so we got the older models sorry.
Great video thanks
Gracias Amigo muchas Gracias
Does anyone else have problems with the a/c blowing humid air at a stop? I’ve taking my truck to the dealer 3 times an they can’t find the problem. 2018 sv
My friend and I have titans and his was having the same issue that you are having and they were able to fix it at the dealership so my advice to you it's to take it to a different dealership!
Theres a TSB about that. Nissan had to replace some kind of driver side door actuator to get it to blow cold air correctly.
This didnt work for me on my 2017. Couldnt get to far right pin, couldnt release the far right snap on filter cover because its so far over, the tether mechanisim came off when reappling tether to plastic hook. I should have all the comments below first.
Any tricks on getting that 3rd pin in? The one closest to the door. I cannot get that back in for the life of me
Remove the 5 screw (3 up top and 2 below) and reassemble the glovebox then never do it that way again. 5 screws 5 minutes LOL
I have a 2020 Titan sv and it’s not designed that way
This advice only works if you have tiny hands. No way in hell is my hand or finger even getting close to that 3rs pin.
I accidentally dropped the pin on the far right down in the door jam. FML
“Not that big of a deal” he says
Just remove the 5 screws...... You'll never get the 3rd hinge pin back in. 5 screws 5 minutes - hinge pins all day LMAO.
The third one is the one that you can’t find so terrible instructions
Thanks for the video