My friend, you can do it yourself and don't chew! What matters is the result and don't care about the time you will do it. Make every move slowly and carefully since it's your first time.
These are times where I'm on YT that I wished I could give more than one thumbs up! Great and meticulous job in the details. A good example of a picture or video is worth a thousand words. Thank you God bless you!
I know nothing about cars.......I was able to figure out how to fix my car luggage lever for $40......the dealership gave me an estimate for $623.00........thank you....thank you and thank you some more!
You are welcome my friend. Yes, you can do it yourself, too. As our ancient Greek ancestors used to say "O TOLMON NIKA" which means "Luck helps the brave".
1st time seeing this mechanic. He is VERY GOOD at teaching us regular people!! How he is VERY PRECISE when showing us everything we need to handle to get the job done correctly. Very informative. I will DEFINITELY be looking him up again!! And will recommend him to my friends as well!! Thank you Sir! Well done!👏🙏 God bless you for the help.
Also God bless you and your family. I wish you the best. Greetings from Greece to the Land of Aristotle, Plato (PHILOSOPHY), Alexander the Great and many other great people.
thank you for showing us how to pass the trunk release cable fro back to front. i own a 1995 toyota corolla hope i can find the cable. will look for rachet to use. god bless you. siir.
Thank you very much. How you worked 1 handed showed great dexterity & fine motor skills. I can confidently replace my 2006 Camry cable after watching your video. Turns out the ball snapped off the drivers pull end which means it failed after 15 years. Toyota reliability👌 Excellent presentation
Thanks my friend and be well. Yes indeed it is very difficult in one hand to hold the camera and in the other to work. All Toyota cars that have this cable have problems. I wish you to be able to replace the cable in your car🚗 without any problems. My friend, I'm waiting for your news soon 💬
The Ball just snapped off. Do you have any idea the Diameter of the Ball itself. I was thinking of taking a Shortcut & just buy a Small Ball Lead fishing weight & just Crimp the Cable. Do you think that this could work? Thank you, Swammy
@@swammyswammy6476 Hi Swammy, it might work if you're trying to save$. I threw away the old cable so I cannot measure the diameter but I guess about 6mm. If you pull off the carpet & unbolt the cable release cover. You can see it & measure it. The fuel cap cable ball is the same size. As long as your sinker is able to fit into it but soft lead, I'm not confident it will hold well enough for long enough. Too much time to pull everything apart. P.S. I also took out the drivers seat
@@YiannisPagonis yes. The job on my wife's 2006 Camry was similar to yours although I removed the drivers seat, allowing a thorough clean of the area. God bless you
This video was a big help but there were some differences with my 2013: the trunk-end of the cable on mine terminates @ the key switch rather than at the latch, and the cable can be changed without removing anything, so easier than is the case in the video. However, the trunk and gas cap cover lever unit @ the driver's seat is not a self-contained plastic unit held on with a single bolt that can be unscrewed and the unit pulled forward. Instead a single bolt is removed and you have to pull the lever unit back through a cross member into the area between the front seat and the door sill, and you have to work underneath the carpet, so more difficult than the case in the video. I have no idea what model year the changes were made at, but I know the 2013's are different than the car in the video. Still, the video was certainly a help. Thank you.
@@YiannisPagonisyes, indeed it went well and now trunk release smoothly on a soft pull of the lever. Mine is the 03-07 model. Has a slightly different setup at the driver end.
Thanks a lot. My cable arrived two days ago. Today I'm going to install it in a 2007 Toyota Yaris. I'll tell you about it. Your videos are a great support.
I agree with all the other comments. Great detail in the way you make your video. Your attention to detail is awesome. Keep up the great work. It really helps us all. 👍🏻🙏🏻
Many thanks for this excellent clear video, not only to the one that holds the camera but also to the slow removal of the wire which teach us to observe first and then think and proceed. Excellent team. Congratulations.
Thank you very much my good friend for your kind words but in the video I am alone there is no one else and I don't have a team.I'm holding the camera.
@@YiannisPagonis Wow! You are incredible then!! The clarity of every movement and transition is never lost! Maybe many of those uploading videos need to learn what camera or cellphone you are using so we can really see what they are doing? I am interested in knowing about it! Many thanks again for sharing with us all.
@@clusa3721 My friend I used a simple camera the SONY Digital HD Video Camera Recorder HDR-CX240E. I haven't been using it for some time now because it's getting old so I got another one
Ευχαριστώ φίλε μου και καλή χρονιά. Ναι γιατί όχι θα μπορούσες να το κάνεις και εσύ μόνος σου με λίγα βασικά εργαλεία ακολουθώντας τις οδηγίες μου. Στο κανάλι μου μπορείς να βρεις και άλλα ενδιαφέροντα βίντεο για τη συντήρηση και επισκευή του αυτοκινήτου σου.
@@YiannisPagonis την άλλαξα τη Ντιζα και όλα καλά. Βέβαια εγώ έκανα 50 λεπτά αλλά δεν είμαι και μάστορας. Με γλύτωσες από 60 ευρώ που ήθελε η αντιπροσωπεία. Σε ευχαριστώ και συνέχισε να βγάζεις βιντεάκια.
@@octaviagtstage1641 Μπράβο φίλε μου χαίρομαι που τα κατάφερες. Τελικά μπορείς να κάνεις πολύ περισσότερα πράγματα απ' ότι φαντάζεσαι. Εάν οργανωθείς λιγάκι μπορείς να δημιουργήσεις το δικό σου συνεργείο και να κάνεις σπουδαία πράγματα!
My friend, in order to give you a solution to your problem, I have to see it first. So can you send me some photos from your cell phone to pagonis33@gmail.com?
Great video. My Carolla is a very basic 2009 model. the levers seem to be in the floor. There isn't a black case that I can see. I can't tell how to get to them. I think my cable end just popped out but I don't see how to reach it.
@@jeremiahbabin2638 I know it is not an easy task to find and remove this cable because it goes through many difficult and mysterious places. So follow from one end of the cable to the other. It takes patience and perseverance in this work.
Common reasons for this to happen: Broken latch: The latch is what allows your trunk to close. The latch in your trunk operates the same as the latch in your door or seatbelt. ... When this cable is broken, there is no connection between the trunk latch and the trunk opening lever, and you won't be able to open the trunk.
Thank you for the details and the video, I have a Camry 2015 and having hard time bc I replaced the wires and the trunk works fine 2 or opening and then as I m driving will open on its own or when I open the trunk then won’t close
CABLE SUB-ASSY, DOOR LOCK 64607-12A30 TOYOTA GENUINE PARTS MADE IN JAPAN. This is the original part (I used) and the part number is 64607-12A30 for order
My friend the length of the cable is 3 meters and 80 cm (3.80 meters) while the thickness of the cable is 1 mm. Thank you very much my friend from whatever country you are from. I am from GREECE.
Firstly thank you for answered my question. I know where are you from also I'm from TURKİYE. This is not important for me. We are human and we need each other everytime, anyway yes I think fix it myself if I can. I think really not hard to fix it. Sorry for the writing late nowadays I'm so busy.
@@cumakandilli9088 There is no problem, my friend, that you are from TURKEY because I believe in friendship between peoples and I judge from your words that you are a good and virtuous person. Now as for the cable the wear may not be on the metal wire of the cable but on the inner casing which is worn and its length has been reduced (I had the same problem in my car and eventually had to replace the cable).
Yiannis Pagonis yea I haven’t got myself to fix it... I’ve been using my key to open the trunk. But it’s a pain Bc the car must be off for me to use this feature. Dealership wanted $450 to fix the issue. No thanks!
@@mimioreo4 Can't your trunk be closed even with your car key? Put the key in the lock trunk and turn it left and right and you might be able to close it
hello my brother me i have a corolla 1.6 petrol year 2008 i have a problem with the throttle please if you can help me you will give me a lot of pleasure i scan its several times i buy throttle petrol pump spark plugs the injectors but its not going there is a device on air filter there are two pipes which tithe crosses on its one comes from throttle the other comes from gas tank which I place only throttle the car of comes weak but once I remove it I can start but slow down is normal please help me thank you
My friend, do all your spark plugs sparkle normally? There is an error: a. in the ignition coil b. clogged air filter c. there are a variety of exhaust system issues. So check the air filter, all ignition coils and the exhaust system.
TOYOTA OEM 09-13 Corolla-Trunk Lid Release Cable 6460712870 www.ebay.com/itm/TOYOTA-OEM-09-13-Corolla-Trunk-Lid-Release-Cable-6460712870/331418986014?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D20190711095549%26meid%3D0dc980f13be14d439211f0a4a93dade7%26pid%3D100047%26rk%3D11%26rkt%3D12%26sd%3D332238882131%26itm%3D331418986014%26pmt%3D0%26noa%3D1%26pg%3D2047675%26algv%3DSellersOtherItemsV2%26brand%3DToyota&_trksid=p2047675.c100047.m2108 www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=6460712870&_sacat=0
Thank you! Can you also show how the fusible link can be removed and replaced? Thank you for your videos regarding this corolla model. It has been very helpful and rewarding to fix your own car.
Not even close to the setup on my 2013 Toyota Corolla US made. You should probably put a disclaimer that your car doesn't resemble most toyotas in North America. None of your videos have been helpful because our cars differ so much.
Thank you. Dealership wanted $800.00. You did it mostly one handed in 25 mins. Probably take me 8 hrs.
My friend, you can do it yourself and don't chew! What matters is the result and don't care about the time you will do it. Make every move slowly and carefully since it's your first time.
These are times where I'm on YT that I wished I could give more than one thumbs up! Great and meticulous job in the details. A good example of a picture or video is worth a thousand words. Thank you God bless you!
Thank you my friend for your kind words and may God bless you and give you what is best for you.
I know nothing about cars.......I was able to figure out how to fix my car luggage lever for $40......the dealership gave me an estimate for $623.00........thank you....thank you and thank you some more!
You are welcome my friend. Yes, you can do it yourself, too. As our ancient Greek ancestors used to say "O TOLMON NIKA" which means "Luck helps the brave".
1st time seeing this mechanic. He is VERY GOOD at teaching us regular people!! How he is VERY PRECISE when showing us everything we need to handle to get the job done correctly. Very informative. I will DEFINITELY be looking him up again!! And will recommend him to my friends as well!! Thank you Sir! Well done!👏🙏 God bless you for the help.
Thank you my friend and you are welcome❤❤❤❤
Also God bless you and your family. I wish you the best. Greetings from Greece to the Land of Aristotle, Plato (PHILOSOPHY), Alexander the Great and many other great people.
You go thru so much effort just to show us how it is done. It must be really hard on you. You must have deep passion for car. Thank you very much.
Yes indeed, it's so my friend as you say. I have a great passion for the car and not only that.
thank you for showing us how to pass the trunk release cable fro back to front. i own a 1995 toyota corolla hope i can find the cable. will look for rachet to use. god bless you. siir.
Thank you very much. How you worked 1 handed showed great dexterity & fine motor skills. I can confidently replace my 2006 Camry cable after watching your video. Turns out the ball snapped off the drivers pull end which means it failed after 15 years. Toyota reliability👌 Excellent presentation
Thanks my friend and be well. Yes indeed it is very difficult in one hand to hold the camera and in the other to work. All Toyota cars that have this cable have problems. I wish you to be able to replace the cable in your car🚗 without any problems. My friend, I'm waiting for your news soon 💬
The Ball just snapped off. Do you have any idea the Diameter of the Ball itself. I was thinking of taking a Shortcut & just buy a Small Ball Lead fishing weight & just Crimp the Cable. Do you think that this could work?
Thank you,
Swammy
@@swammyswammy6476 Hi Swammy, it might work if you're trying to save$. I threw away the old cable so I cannot measure the diameter but I guess about 6mm. If you pull off the carpet & unbolt the cable release cover. You can see it & measure it. The fuel cap cable ball is the same size. As long as your sinker is able to fit into it but soft lead, I'm not confident it will hold well enough for long enough. Too much time to pull everything apart. P.S. I also took out the drivers seat
@@YiannisPagonis yes. The job on my wife's 2006 Camry was similar to yours although I removed the drivers seat, allowing a thorough clean of the area. God bless you
I have seen so many you tube videos , I have to say, yours was the best with so much detail and patience. I salute you Sir thank you so much.
You are welcome🎉❤🌹🙏 my👭👬👫 friend😇😊 and I wish you the best👍💯
This video was a big help but there were some differences with my 2013: the trunk-end of the cable on mine terminates @ the key switch rather than at the latch, and the cable can be changed without removing anything, so easier than is the case in the video. However, the trunk and gas cap cover lever unit @ the driver's seat is not a self-contained plastic unit held on with a single bolt that can be unscrewed and the unit pulled forward. Instead a single bolt is removed and you have to pull the lever unit back through a cross member into the area between the front seat and the door sill, and you have to work underneath the carpet, so more difficult than the case in the video. I have no idea what model year the changes were made at, but I know the 2013's are different than the car in the video. Still, the video was certainly a help. Thank you.
OMG, GOING TO TRY TO INSTALL MYSELF. THANKS TO THIS DETAILED POST.
Yes, try to do it yourself and I believe you will succeed. Who dares wins. Fortune favors the bold. I hope everything goes well👍
Very good mechanic. I appreciate your effort. Thank you for teaching us. 🙏🙏🙏
Thank you very much but I am not an engineer, I am an amateur, that is, I am in love with art
This helped me to replace my 07 corolla's trunk release cable. Thank you for sharing this.
This is great news and I am very happy about it. I imagine you did a very good job with an excellent result.
@@YiannisPagonisyes, indeed it went well and now trunk release smoothly on a soft pull of the lever. Mine is the 03-07 model. Has a slightly different setup at the driver end.
Thanks a lot. My cable arrived two days ago. Today I'm going to install it in a 2007 Toyota Yaris. I'll tell you about it. Your videos are a great support.
Thank you my friend for your kind words and I wish you good luck in installing this cable. Greetings from beautiful Greece.
@@YiannisPagonis thanks!
@@jamespons3315 You are welcome my friend
I agree with all the other comments. Great detail in the way you make your video. Your attention to detail is awesome. Keep up the great work. It really helps us all. 👍🏻🙏🏻
Many thanks for this excellent clear video, not only to the one that holds the camera but also to the slow removal of the wire which teach us to observe first and then think and proceed. Excellent team. Congratulations.
Thank you very much my good friend for your kind words but in the video I am alone there is no one else and I don't have a team.I'm holding the camera.
@@YiannisPagonis Wow! You are incredible then!! The clarity of every movement and transition is never lost! Maybe many of those uploading videos need to learn what camera or cellphone you are using so we can really see what they are doing? I am interested in knowing about it! Many thanks again for sharing with us all.
@@clusa3721 My friend I used a simple camera the SONY Digital HD Video Camera Recorder HDR-CX240E. I haven't been using it for some time now because it's getting old so I got another one
A passion for fixing things is awesome
I totally agree . What is your own passion my friend?
Well done, good detail in both your disassembly and re-assembly.
Thanks a lot my friend
mmm love your hands, you sir is a hard working man! thanks for the video
You are welcome my friend
Çok teşekkür ediyorum değerli bilgileriniz için
Bir şey değil arkadaşım
Bravo on the camera work for this video!
👊😲
You have the steadiness of a sharpshooter!
👌😚😄😎🇺🇲
Thanks a lot my friend 😉😉🙏🙏. However, it is quite difficult to hold the camera in one hand and work in the other 🚗🚗
@@YiannisPagonis
EXACTLY!
And still, this video is better than any instruction manual I've read! 👊😄
Μπράβο για την καλή δουλειά που κάνεις. Δείχνεις πολύ αναλυτικά στα βίντεο. Θα επιχειρήσω και εγώ να αλλάξω τη Ντιζα βλέποντας εσένα.
Ευχαριστώ φίλε μου και καλή χρονιά. Ναι γιατί όχι θα μπορούσες να το κάνεις και εσύ μόνος σου με λίγα βασικά εργαλεία ακολουθώντας τις οδηγίες μου. Στο κανάλι μου μπορείς να βρεις και άλλα ενδιαφέροντα βίντεο για τη συντήρηση και επισκευή του αυτοκινήτου σου.
@@YiannisPagonis έχω κάνει καιρό εγγραφή και παρακολουθώ όλα τα βίντεο . Καλή χρονιά με υγεία.
@@octaviagtstage1641 Ευχαριστώ πολύ
@@YiannisPagonis την άλλαξα τη Ντιζα και όλα καλά. Βέβαια εγώ έκανα 50 λεπτά αλλά δεν είμαι και μάστορας. Με γλύτωσες από 60 ευρώ που ήθελε η αντιπροσωπεία. Σε ευχαριστώ και συνέχισε να βγάζεις βιντεάκια.
@@octaviagtstage1641 Μπράβο φίλε μου χαίρομαι που τα κατάφερες. Τελικά μπορείς να κάνεις πολύ περισσότερα πράγματα απ' ότι φαντάζεσαι. Εάν οργανωθείς λιγάκι μπορείς να δημιουργήσεις το δικό σου συνεργείο και να κάνεις σπουδαία πράγματα!
Thanks, this helped me fix my trunk popper.
You are welcome my friend
This is for 2003-2007 model Corolla. I’m looking for help with a 2013 model Corolla cable repair. But good video though.
My friend, maybe the following video will be useful for what you want to do
ua-cam.com/users/shortstHdORxPwjJo
wow.. this is good video.. now i have confident to DIY .. many thanks!!!!
You are welcome my friend. You can do things that you could not even imagine that you would do. So do it yourself and I'm sure you will succeed.
Awesome repair video! You have great skills! Thank you very much for sharing your knowledge with us!
Thank you my friend but all the glory and honor belongs to the mighty God!
My 2010 Corolla doesn’t have the box that covers the release cable and it is under the rug . How do I get access to the cable?
My friend, in order to give you a solution to your problem, I have to see it first. So can you send me some photos from your cell phone to pagonis33@gmail.com?
Thank you so much for your video. It was very useful.
You are welcome
Thank you for making this video! :)
You are welcome my dear friend and God bless you and your family. Friendly greetings from Greece
Great video. My Carolla is a very basic 2009 model. the levers seem to be in the floor. There isn't a black case that I can see. I can't tell how to get to them. I think my cable end just popped out but I don't see how to reach it.
After investigating further, It looks like I have to unbolt the seat.
@@jeremiahbabin2638 I know it is not an easy task to find and remove this cable because it goes through many difficult and mysterious places. So follow from one end of the cable to the other. It takes patience and perseverance in this work.
Thank you so very, sir.
Very appreciated.
You are welcome my friend 🙏🙏🙏🙏
Is there any indication why the latch stops working? I have a 2013 corolla.. just doesn't work anymore pulls nothing.
Common reasons for this to happen: Broken latch: The latch is what allows your trunk to close. The latch in your trunk operates the same as the latch in your door or seatbelt. ... When this cable is broken, there is no connection between the trunk latch and the trunk opening lever, and you won't be able to open the trunk.
Thank you for your efforts.
Thank you my friend
Is the gas cable done the same way ??
ua-cam.com/video/pciEIj0JGCU/v-deo.html
No i mean the cable for the gas filler door, The cable next to the trunk cable !
I like the music and video ofc. Thanks!
You are welcome my friend
My trunk only opens with the key button not the pull inside car is this the fix I need??
Most likely the problem is in the trunk cable or the 2 ends where the cable connects
Why not just feed a long bike brake cable down the existing tube, then swagz (sp) both ends.
Just like a bike cable.
Amazed video! Thanks for sharing.
You are welcome my friend
Thank you for the details and the video, I have a Camry 2015 and having hard time bc I replaced the wires and the trunk works fine 2 or opening and then as I m driving will open on its own or when I open the trunk then won’t close
Did you use a new or used cable? Was it genuine?
@@YiannisPagonis new I think needs to be replaced the latch
@@t1rebor So check it out
Hey! Great video man 👍🏿, where did u find a replacement cable? Or did you reuse the original?
CABLE SUB-ASSY, DOOR LOCK 64607-12A30 TOYOTA GENUINE PARTS MADE IN JAPAN. This is the original part (I used) and the part number is 64607-12A30 for order
Awesome job👏👍
Thank you my friend 🙏🙏
Thank you 🙏 my dear friend ❤️
By any chance will these work on my 93 corolla ?
No my friend it is not the same
Good job👍 so I want to ask you, do you know how long is the cable and how thin is the inner wire? How many mm?
My friend the length of the cable is 3 meters and 80 cm (3.80 meters) while the thickness of the cable is 1 mm. Thank you very much my friend from whatever country you are from. I am from GREECE.
Are you thinking of making your own cable with your own hands? Know that you can do it! The original cable costs 45 euros.
Firstly thank you for answered my question. I know where are you from also I'm from TURKİYE. This is not important for me. We are human and we need each other everytime, anyway yes I think fix it myself if I can. I think really not hard to fix it. Sorry for the writing late nowadays I'm so busy.
@@cumakandilli9088 There is no problem, my friend, that you are from TURKEY because I believe in friendship between peoples and I judge from your words that you are a good and virtuous person. Now as for the cable the wear may not be on the metal wire of the cable but on the inner casing which is worn and its length has been reduced (I had the same problem in my car and eventually had to replace the cable).
My 2010 Camry has the same issue. I don’t get it my old Honda never had this issue. This seems to be common in Toyota’s.
That is indeed the truth. Many Corollars, sooner or later, have this problem with cables. I recently changed my Corolla as well.
Yiannis Pagonis yea I haven’t got myself to fix it... I’ve been using my key to open the trunk. But it’s a pain Bc the car must be off for me to use this feature. Dealership wanted $450 to fix the issue. No thanks!
Where do you live sir? I want you to help me replace for my car please, I live in Houston, TX, thanks 🙏
I live in Greece🇬🇷 my👭👬👫 friend😊💜. I'm a Greek man. What can I do for you?
@@YiannisPagonis I want to fix for my car, it just happened yesterday when I opened my trunk and it broked now my trunk can’t close
@@mimioreo4 Can't your trunk be closed even with your car key? Put the key in the lock trunk and turn it left and right and you might be able to close it
@@YiannisPagonis look like the wire or extension cord loose when I pull the thing to open it
I don’t have this level of patience 😅😂
You do not have it now but in the future you will get it!!!
@@YiannisPagonis Well I ordered the cable online yesterday. Will let you know how installation turns out.
@@coreyxpress Okay my friend I am waiting for your news soon and I believe everything is going well.
Thanks
You are welcome 🙏 my friend
دەست خۆش
Yes
Thank you!
You are welcome my friend😊
Question anyone know the part number for the latch pull thing lol
hello my brother me i have a corolla 1.6 petrol year 2008 i have a problem with the throttle please if you can help me you will give me a lot of pleasure i scan its several times i buy throttle petrol pump spark plugs the injectors but its not going there is a device on air filter there are two pipes which tithe crosses on its one comes from throttle the other comes from gas tank which I place only throttle the car of comes weak but once I remove it I can start but slow down is normal please help me thank you
My friend, do all your spark plugs sparkle normally? There is an error: a. in the ignition coil b. clogged air filter c. there are a variety of exhaust system issues. So check the air filter, all ignition coils and the exhaust system.
What is the part number of that cable?
TOYOTA OEM 09-13 Corolla-Trunk Lid Release Cable 6460712870
www.ebay.com/itm/TOYOTA-OEM-09-13-Corolla-Trunk-Lid-Release-Cable-6460712870/331418986014?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D20190711095549%26meid%3D0dc980f13be14d439211f0a4a93dade7%26pid%3D100047%26rk%3D11%26rkt%3D12%26sd%3D332238882131%26itm%3D331418986014%26pmt%3D0%26noa%3D1%26pg%3D2047675%26algv%3DSellersOtherItemsV2%26brand%3DToyota&_trksid=p2047675.c100047.m2108
www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=6460712870&_sacat=0
Thank you! Can you also show how the fusible link can be removed and replaced? Thank you for your videos regarding this corolla model. It has been very helpful and rewarding to fix your own car.
@@kimbryanduenas Sorry but i don't undrestand what the fusible link. Tel me please...
In this video, the guy took the fusible link out but did not show it.
ua-cam.com/video/P11Kp7MzRjY/v-deo.html
Good job
Thank you my friend. You are welcome.
هاذه شرح منتاز
خیلی ممنون دوستم و خدا پشت و پناهت باشه
My car is toyota corolla 2012 S and very different of your trunk
güzel iş
Teşekkür ederim sevgili arkadaşım
my 2013 toyota corolla looks NOTHING LIKE THIS??????????? Vid may not be for 2013 Corolla as title states.
Did you find a video that helped you? I have to replace mine too n I have same vehicle as you
Not even close to the setup on my 2013 Toyota Corolla US made. You should probably put a disclaimer that your car doesn't resemble most toyotas in North America. None of your videos have been helpful because our cars differ so much.
Don't worry my friend. Be cool
thank you !
You are welcome my👭👬👫 friend😊