@xjet yes, but I said Higher not high. Higher than that one that came with the radio or module, probably a 2 db you can put a 5 db omni instead of that panel that should be around 8 db. but of course higher gain means more directionality and that is not a good idea for a radio you hold in your hands...
@xjet Cheers! Do you know if you can do a tricopter without the pivotal rear motor and just you torque for yaw? I ask as i want to keep things simple (and cheaper) but keep the Y configuration
Sounds really nice. I've just bought a KK black board for my hexa, but I'm confused as to where it gets its power from? It didn't come with any instructions and couldn't find any info on this. Does it just take the power it needs from all the ESC's connected to it?
What Kv motors & what size/pitch props is he using? sounds pretty high revs compared to mine - he may well need smaller props or lower kv motors to get it stable (I'm using 750 kv motors with 10x4.7 apc props on mine with the older v4 green smd board & it's ok until it gets really windy). looks like the mems
Nice tricopter! I'm building one too, well is built, but at the setting up stage.. Can you tell me where you sourced the CD type board cover with the easy clips on it please? Thanks! Matt
can I use any Esc with this board. is this the same board as KK Multicopter Black Board V5.5 in ebay. Im planing to use Hobbyking SS Series 15-18A ESC and basic Hk tx rx. Whats your advice.
that antenna on the tx is not a good idea, better use a higher gain omni than that. tha way you have in on the video puts one lobe on your face ond another on the ground nothing on the rx
@xjet
yes, but I said Higher not high. Higher than that one that came with the radio or module, probably a 2 db you can put a 5 db omni instead of that panel that should be around 8 db.
but of course higher gain means more directionality and that is not a good idea for a radio you hold in your hands...
"First flight! Get the bag, Ron."
It seems very quiet.
Is a great airplane !!
@xjet Cheers! Do you know if you can do a tricopter without the pivotal rear motor and just you torque for yaw? I ask as i want to keep things simple (and cheaper) but keep the Y configuration
I believe KK needs to be disarmed and armed again (by moving TX sticks) to reload new gyro gains
Is that a home made tricopter. It is really nice........Want one!
Sounds really nice. I've just bought a KK black board for my hexa, but I'm confused as to where it gets its power from? It didn't come with any instructions and couldn't find any info on this. Does it just take the power it needs from all the ESC's connected to it?
What Kv motors & what size/pitch props is he using? sounds pretty high revs compared to mine - he may well need smaller props or lower kv motors to get it stable (I'm using 750 kv motors with 10x4.7 apc props on mine with the older v4 green smd board & it's ok until it gets really windy). looks like the mems
Nice tricopter! I'm building one too, well is built, but at the setting up stage.. Can you tell me where you sourced the CD type board cover with the easy clips on it please?
Thanks!
Matt
he xjet have you seen the tricopter that uses a wii controller for the gyros
maby you could try make yourself and show us how it is done?
i just got one of these boards but no diagram to show me how to set it up for a tricopter. can help me out??
except the kk microcontroller, what else i need to buy to build this multicopter?
can I use any Esc with this board. is this the same board as KK Multicopter Black Board V5.5 in ebay. Im planing to use Hobbyking SS Series 15-18A ESC
and basic Hk tx rx. Whats your advice.
reminds me of the nebuchanezza from the matrix!
Nice! Was the rudder servo glitching at the beginning? Does this support position hold (altitude and location?
Blackboards are brilliant cheap controllers, ive got 3 of em on my gear. Nothing beats multiwii though. ;)
@Wolfenion Short answer: yes :)
Is this a torque yaw? or is it a pivotal rear motor?
that antenna on the tx is not a good idea, better use a higher gain omni than that. tha way you have in on the video puts one lobe on your face ond another on the ground nothing on the rx
where i can find to buy this copter that you are using ????
Cool :P
can you define P=Gain and I=Limit for me
100 P=Gain
0 P=Gain
how do you set the sensitivity of the gyroscopes ??
Did he say Pens or Pins?
has anyone ever done a tricopter 3D ??
Có thể hướng dẫn mình làm điều chỉnh nầy khồn
Where can you get one of those kk boards?