I saw another guy using one of these that had cut pieces of sidewall out of old tires to put under the rim and under the holder above the rim to keep from scratching his painted rims.
Thanks for the comment always appreciated if you want check out a video I posted of this tire changer just modified with an attachment I made for it witch make the job much easier
I know that you're not supposed to use pb blaster but if you have work on any heavy diesel shop that works on 18 wheelers those tires are all done by hand and 90% of the time they use pb blaster I've been using pb blaster on all my tires now for about 6 years and haven't had any issues again I know it's not technically the correct thing to use but if it works... It works and I only use it on my own vehicles so if I slip a bead it's on me lol I'll pay for my mistake check out my video where I modified this tire changer and made it 10x easier to work with thanks for the feedback it's always welcome!
1st off, when doing larger tires you will bend the long bar, 2nd on the bead breaker, you have to add to the attachment to raise it higher, then it will work great!
I saw another guy using one of these that had cut pieces of sidewall out of old tires to put under the rim and under the holder above the rim to keep from scratching his painted rims.
Just did 35 12.50 18 last night. Went about the same as you...good job! Thanks.
Nice work.👍
Thanks for the comment always appreciated if you want check out a video I posted of this tire changer just modified with an attachment I made for it witch make the job much easier
ua-cam.com/video/eIcJaSbx8r4/v-deo.htmlsi=AWbYEtrJznllcxmN
Lubricante amigo
Dawn dish soap is great for this, and when it dries up it doesn't allow the rim and tire to slip.
I know that you're not supposed to use pb blaster but if you have work on any heavy diesel shop that works on 18 wheelers those tires are all done by hand and 90% of the time they use pb blaster I've been using pb blaster on all my tires now for about 6 years and haven't had any issues again I know it's not technically the correct thing to use but if it works... It works and I only use it on my own vehicles so if I slip a bead it's on me lol I'll pay for my mistake check out my video where I modified this tire changer and made it 10x easier to work with thanks for the feedback it's always welcome!
The one rare case of tire slip I've seen is on paddle tires 😅
But I agree some tire lube is alright for 90% of people with their rigs on the road
1st off, when doing larger tires you will bend the long bar, 2nd on the bead breaker, you have to add to the attachment to raise it higher, then it will work great!
Good job man,!
Should have used soap but it came out a lot easier I did my Jeep last night and it came out really good using soap
20 inch wheels?
Yes 20' rims
Did it scratch your wheel at all?
Believe it or not no and the paint on these rims is in bad shape to begin with but nothing got scratched or rubbed off
Cuando vaya aser video de llantas vuske un rin 14 y la llanta 15 para k el video quede ecselente. Y no este vatallandodo
Nice!
Check out the updated video of the attachment I made for this machine it works a lot better
No sabe el muchacho
@@MynorAlvarado-oz8ex the boy doesn't know??