Love your jewelry! Absolutely enjoying all your videos...especially when you make me laugh! I always learn something each time I watch. How awesome that you share your creativity with us! 💙
Absolutely brilliant, you have been a very good demonstrating also very clear l have done some of your work being new to expoxy resin it is a great help. Thank you
Hi Steve. I went on a marathon watching you videos but since I'm deaf I use the CC. You must be talking very fast cuz I find my self missing so much. I know this is a personal problem but I thought I'd mention it in case you have others that need the cc. /But to get to your videos. I love the way you explain things thoroughly. Keep up the good work and I'm goint to buy you a cup of coffee
Steve, do you have a video for polishing somewhere? I find I get so far with the wet and dry stuff but can never quite get the final shine! I’m missing something clearly! 😏
As usual wonderful tutorial! I really enjoy your videos and loved the damned dam tape joke 😆 I totally agree on the pigment drops over alcohol inks... unfortunately the last time I got mica powder it was a terrible brand that left an impossible to remove greasy film on my molds! 😢 I will have to check out the link to the brand u use and I'll probably get that jdinction resin kit too, as the resin I used to use seems less great these days :/ anyway THANK U! U ROCK!
Ok!! Now to find a way to get enough temperature change to get the wonderful ripples that you achieved on the tops!! So, as it's coming on winter weather here in the U.S ... I'm thinking maybe by taking the pieces out under the carport for the night to get the drop in temperature???? My idea is that I can highlight the texture with a bit of dry brushing with a contrasting color then a thin layer of resin to seal it. can't try that yet because the temperature isn't dropping as quickly as what I am thinking I would need. Any thoughts as to doing this?? Ringy-dingy🔔🔔🦋🦋
@@SteveMcDonaldArtsandCrafts Hi Steve, at one of your last videos (where you advertised a discount for the jdiction stuff) I asked, how non-UK-Europeans could get that discount. Someone else asked that too (it wasn´t just me ;) ).
Hi Steve. Thankx a bunch for all of your videos. Just a little tip that won't allow the tape to stick to your gloves. Instead of cutting off the ends; just fold them both over onto themselves like you do to the roll. I've seen some people put a small piece of paper on the ends too. Then you can move the the items taped on it without getting stuck to the tape. After watching all of your experiments, I've stocked up on all kinds of stickers and other things to put in resin when I see them on sale. I have to say that I get so into your videos, that I get a little sad when they go off so quickly. I just can't get enough of your experiments with resin.
I am learning so much watching your tutorials! Thanks for all the experimenting you do. Just wondering if you have a way to clean up the pipettes so you can reuse them, or are they disposed of after use on a project? I assume they are not reusable, but thought I'd ask.
I'm going to give jdiction a try now. You've convinced me they are very quality products and supplies! Plus their prices can't be beat! Thank you Steve, you're the best 🌟
wonderful video Steve thank you for sharing, I have a question: about something a bit different.... have you ever tried making something with air dry clay and put it into the resin? I've been thinking about making a tray with an octopus in the resin with its tentacles both in resin and out sort of like handles for the tray, just wondered what your thoughts might be on that???
Heelo sir. Oh I m so lucky.. few days ago I bought the same 🦋 stickers by thinking that I can try it in resin jewellery and i saw today ur video.. thank you so much for tutorial.
Hi Steve, I need this tuition! Open pendants for me are quite daunting. 😬 I have even thought about painting nail latex around the pendant! 🤪 Thank you very much. 👍😊
Quick question Steve, do you have prepare those stickers in any way? Like putting a glossy finish of modge on them before putting them in resin? Thank you for your videos!
A good tutorial, but I do with you would use a WHITE background, at least for the final photos of the pieces. That blue color really washes the resin color away and changes the look of everything.
Hi Steve all the pieces you done are beautiful as allways ,,but I have to say that I'm very disappointed with the butterfly stickers with the white edges, as I got some butterfly stickers and they were supposed to be transparent edges but had white edges to the but were much the same as the ones that you used in your video,, I think they would look awesome with transparent edges, as they would look more realistic Stay safe have a great week.
I bought a cheap reptile heat mat for my resin because of the temperature fluctuations where I live. Best investment ever! Really cheap to run and my resin cures consistently every time now! It has a thermostat too so the resin doesn't go into thermal shock by being too hot. Lovely video!
Love to watch and see how you do things with your brilliant mind! Happy accident with the temperature change. Thank you Steve and keep up the great works!!
I just got into resin jewelry over the weekend and I must say your videos have been very inspiring educational and heartwarming. Thank you! Not all heroes wear capes! 🫶🏾
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Love your jewelry! Absolutely enjoying all your videos...especially when you make me laugh! I always learn something each time I watch. How awesome that you share your creativity with us! 💙
Thank you, Dr. Mc.
i love the crinkly look on those :D
I love making resin jewelry! Well, I love making resin anything nowadays 😆
@@SteveMcDonaldArtsandCrafts I can't wait to see! 🥰
Very nicely done.
Love your tutorials thankyou very much
Love all your videos, so glad I found your channels. Could you please do a video on how you clean your pipettes?
Great job. Thank you so much for existing!
What a nice red colour!
Love all your videos! In the US we call the "lollipop" stick a popsicle stick. Lol i like your version better!!
Thank you Steve, as usual amazing.
Absolutely brilliant, you have been a very good demonstrating also very clear l have done some of your work being new to expoxy resin it is a great help. Thank you
Look great! Been making jewellery this week too!
Hi Steve. I went on a marathon watching you videos but since I'm deaf I use the CC. You must be talking very fast cuz I find my self missing so much. I know this is a personal problem but I thought I'd mention it in case you have others that need the cc.
/But to get to your videos. I love the way you explain things thoroughly. Keep up the good work and I'm goint to buy you a cup of coffee
That leveling tip for pendant bezels.... why didn't I think of that! Thank you, Steve!
Steve, do you have a video for polishing somewhere? I find I get so far with the wet and dry stuff but can never quite get the final shine! I’m missing something clearly! 😏
Great idea
Lovely, one question, how do you get the residue from the tape off the back?
How do you clean out the pipette? Or do you throw it out.
As usual wonderful tutorial! I really enjoy your videos and loved the damned dam tape joke 😆 I totally agree on the pigment drops over alcohol inks... unfortunately the last time I got mica powder it was a terrible brand that left an impossible to remove greasy film on my molds! 😢 I will have to check out the link to the brand u use and I'll probably get that jdinction resin kit too, as the resin I used to use seems less great these days :/ anyway THANK U! U ROCK!
Is it Gold Leaf glue? Or Metal Leaf glue? The link brings you to Metal Leaf glue. Is it the same? Thanks! ❤
Thank you for your amazing lessons! What mold release do you use?
Can pebeo paints be used in resin?
What tape do you use with the open back bezels please?
The promo code for the kit did not work. I ordered it anyway.
Ok!! Now to find a way to get enough temperature change to get the wonderful ripples that you achieved on the tops!!
So, as it's coming on winter weather here in the U.S
... I'm thinking maybe by taking the pieces out under the carport for the night to get the drop in temperature????
My idea is that I can highlight the texture with a bit of dry brushing with a contrasting color then a thin layer of resin to seal it. can't try that yet because the temperature isn't dropping as quickly as what I am thinking I would need. Any thoughts as to doing this??
Ringy-dingy🔔🔔🦋🦋
@@SteveMcDonaldArtsandCrafts Thank you for the input!!! I think that the freezer will be a great way to do this year round!!! Can't wait to try it.🦋🦋🦋
I don't see the link for the JDiction kit. It's a bit difficult to get hold of some things here in South Africa.
Found the link, thanks.
Hi Steve: Same question again like last time: What about our viewers in continental Europe?
@@SteveMcDonaldArtsandCrafts Hi Steve, at one of your last videos (where you advertised a discount for the jdiction stuff) I asked, how non-UK-Europeans could get that discount. Someone else asked that too (it wasn´t just me ;) ).
What is your source for daming tape? It is not in your store.
The link for UK resin doesn’t work?
Am already making bangles
@Prakashbjaifl9dg
He linked everything in the description …. So now you can go buy your own dam tape! 😆💖
😋😋
😆 👍
I can't see the link for the dam tape. Is it actually called that?
🤣🤣🤣
Hi Steve. Thankx a bunch for all of your videos. Just a little tip that won't allow the tape to stick to your gloves. Instead of cutting off the ends; just fold them both over onto themselves like you do to the roll. I've seen some people put a small piece of paper on the ends too. Then you can move the the items taped on it without getting stuck to the tape.
After watching all of your experiments, I've stocked up on all kinds of stickers and other things to put in resin when I see them on sale. I have to say that I get so into your videos, that I get a little sad when they go off so quickly. I just can't get enough of your experiments with resin.
Wha is damming tape (sp?)?
I am learning so much watching your tutorials! Thanks for all the experimenting you do. Just wondering if you have a way to clean up the pipettes so you can reuse them, or are they disposed of after use on a project? I assume they are not reusable, but thought I'd ask.
I'm going to give jdiction a try now. You've convinced me they are very quality products and supplies! Plus their prices can't be beat! Thank you Steve, you're the best 🌟
I love watching your videos! I get so inspired. You are so creative and talented. ❤
wonderful video Steve thank you for sharing, I have a question: about something a bit different.... have you ever tried making something with air dry clay and put it into the resin? I've been thinking about making a tray with an octopus in the resin with its tentacles both in resin and out sort of like handles for the tray, just wondered what your thoughts might be on that???
I’m thinking about trying to work with resin. Just curious do you have to wear a mask with the resin you use?
Hi Steve, ideally love watching your videos, I am new to this resin ,messed up a few times but getting better
Those all turned out really pretty! I really love the color you used in the four leaf clover. Thanks for the great ideas!
For the heart that wrinkled up a bit due to the temperature change, just sell it with a tag that says "Stone Cold Heart." 😁
HI Steve, Super duper tutorial nice end Projects thanks for sharing Lin 👍✨
Have you seen a lollipop? That stick you have is popcicle stick . Lol sorry couldn't help myself lol🤣
How do you clean your pipette?
I love your videos, super helpful !!!
Microfiber glitter helps to color resin great tip.
👏👏👏👏👏🙏😍Love your channel
Love my Mica Powder
Thank god for you x
Is there a link for the tape?
How can I come
A member
Thank you.
👏👏👏👏👏👏👏❤
Ty
Love is
👍😀
👏
I have wondered if you can clean the pipettes and if so, how? Or are they single use?
Sorry. Can't get access without sending monthly money. Oh found another of your videos explaining it. Thx.
Where do you get those little micro brushes? I’m in the USA by the way, thank you.
Super cute and now I can get my dam tape 🤣🤣🤣
@@SteveMcDonaldArtsandCrafts thank you very much.
Heelo sir. Oh I m so lucky.. few days ago I bought the same 🦋 stickers by thinking that I can try it in resin jewellery and i saw today ur video.. thank you so much for tutorial.
Very nice! I think the 4leaf clover is my favorite!
Oooh look delicate but really pretty! 💖💖💖👏👏👏🇦🇺
Hi Steve, I need this tuition! Open pendants for me are quite daunting. 😬 I have even thought about painting nail latex around the pendant! 🤪
Thank you very much. 👍😊
Quick question Steve, do you have prepare those stickers in any way? Like putting a glossy finish of modge on them before putting them in resin? Thank you for your videos!
A good tutorial, but I do with you would use a WHITE background, at least for the final photos of the pieces. That blue color really washes the resin color away and changes the look of everything.
Hi Steve all the pieces you done are beautiful as allways ,,but I have to say that I'm very disappointed with the butterfly stickers with the white edges, as I got some butterfly stickers and they were supposed to be transparent edges but had white edges to the but were much the same as the ones that you used in your video,, I think they would look awesome with transparent edges, as they would look more realistic Stay safe have a great week.
Hello 🎉, I found your tutorials the best, because you explain how to make your projects and why you take the steps necessary for a good project.
I bought a cheap reptile heat mat for my resin because of the temperature fluctuations where I live. Best investment ever! Really cheap to run and my resin cures consistently every time now! It has a thermostat too so the resin doesn't go into thermal shock by being too hot. Lovely video!
Yay! I'm so thankful for this episode.
Wow that’s an amazing kit for the price, sadly I’m in the uk so prices much higher
I wondered how to put little jems in my resin pieces. Thanks!! Now those little jems will be where I want them.
Dang I just ordered that kit the other day wish I had the discount code then.
Great vid Steve! I am learning so much.
I level my solid bezels on a piece of blue tac or playdoh, just put a ball down and press the bezel onto it until its level
I love that heart with the stars and diamonds in it.
I love that you made the 4 leaf clover red! Haha
I like these alot
You used alchool ink but placed mica link on your description what is the alchool inks you used please? Thanks
@@SteveMcDonaldArtsandCrafts yes thanks 😊
Is there any way to save a piece of jewelry if the resin overflows and dries on the metal?
Hey! I would think you could just sand the resin that overflowed !
Can you show us how you store your molds?!
@@SteveMcDonaldArtsandCrafts Thank you!
You always make us laugh. Everything is so pretty
If you are color blind HOW cam you tell they are beautiful colors?🙄
Love to watch and see how you do things with your brilliant mind! Happy accident with the temperature change. Thank you Steve and keep up the great works!!
I just got into resin jewelry over the weekend and I must say your videos have been very inspiring educational and heartwarming. Thank you! Not all heroes wear capes! 🫶🏾