@@ExtraordinaireThe no kidding, no more rubber bands that wear out every couple months. I bought the one showed in this video as well as the angled version.
Hey I hope you make a video about your role in operation overlord, such as just explaining if it was fun or what was difficult about it and stuff like that. I enjoyed seeing your acting. It was pretty good and the mini movie was pretty solid. I enjoyed it and it was amazing!! Great work and keep it up!!!
So fun fact if you had the Surefire DS tail cap that actually allows the switch to have a proper on switch rather than momentarily. I just ordered my switch and DS cap.
I recognize that $200 KAC Front sight. I matched mine with a Geissele rear FDE. My Mk18 has a rear KAC tower (mini) and it is the best buis I’ve ever used.
Hey dude! I have the exact same light setup, but I have an issue with mine, in that the brightness of my light is dependent on how hard I press the button. I have to really mash it down to get the light to full brightness, and it works best if I press along the edges of the switch rather than the middle. Mines also not really "clicky." Was wondering if you or anyone else has this issue and knows what to do about it?
I just watched the overlord short film and I was amazed with the tactics, the sound, the awesome looking gear and just about everything involved in it. Just after I watched scp overlord I discovered your channel and I'm now addicted. Your now by far my fav youtuber. Also I have a question, which one of the operators are you in scp overlord?(what is your gas mask?) I hope you Have a great day and keep up the awesome work.
Did you have issues getting to the 5in/lb torque value? My bolt just kept spinning. Waiting on another bolt from modlite. Great customer service as they forgot to pack 2 in the plastic sleeve.
I have a modbutton with a surefire scout. Thing is a POS, causes the light to flicker and dim the output. Customer service blames it on the tail cap. I know it's not the tail cap because it does the same thing on my buddies light with a different cap that works just fine with his pressure pad. They will not be receiving any more of my money.
Hey, hopefully you're still reading the comments lol, but how much is 5 inch pounds??? That's the recommended torque that's specified in the installation instructions, but I have NO idea how much that is. I tried to set up mine so that the screws come out the same amount that I see on your video, how's yours holding up with that amount?
2:18 sorry if it's a dumb question, but can you explain that o-ring thing for cable management? Does it come with the Arisaka? And how do you mount it?
Not included. It's just a small o-ring to aid in managing the cable for a cleaner look. You could use a rubber band to achieve similar results. Just slide it over the tailcap to keep the cable pressed against the light body.
You could use a ranger band also. They are on ebay the large works with the Geissele rails. But thats prob a 1/2" or so o ring but thats just a guess. Ranger bands are a extremely versatile item tho. Almost like duct tape versatile.
@@ExtraordinaireThe okay cool jw. Saw on trex arms website that some of the accessories for Modlite are surefire. Would you say modlite is better than surefire?
@@raftika1 I like Modlite better than Surefire switch. It is well made, a lot shorter and attaches securely to the rail. Surefire, without the Cloud Defensive mount, is all over the place. Modlite is half the price and doesn’t need a mount.
I can't believe I only just now discovered mod buttons. Been using pressure pads like a fool this whole time. These make life sooo much easier.
Really have been a game-changer.
@@ExtraordinaireThe no kidding, no more rubber bands that wear out every couple months. I bought the one showed in this video as well as the angled version.
I always love the quality of your vids! Love the gun
Hey I hope you make a video about your role in operation overlord, such as just explaining if it was fun or what was difficult about it and stuff like that. I enjoyed seeing your acting. It was pretty good and the mini movie was pretty solid. I enjoyed it and it was amazing!! Great work and keep it up!!!
I would love to see that too
So fun fact if you had the Surefire DS tail cap that actually allows the switch to have a proper on switch rather than momentarily. I just ordered my switch and DS cap.
Yep, that's my next step.
What O ring piece did you use. I love that wire management
I recognize that $200 KAC Front sight. I matched mine with a Geissele rear FDE. My Mk18 has a rear KAC tower (mini) and it is the best buis I’ve ever used.
I highly recommend the KAC tower. Has a great elevation adjust by just spinning the tower 200-600 meters and wind age as well. Super solid
Looks like a fake. No markings. Also looks like plastic. At 3.52 you can see the molding seam.
Yea it's airsoft but so what
Hey dude! I have the exact same light setup, but I have an issue with mine, in that the brightness of my light is dependent on how hard I press the button. I have to really mash it down to get the light to full brightness, and it works best if I press along the edges of the switch rather than the middle. Mines also not really "clicky." Was wondering if you or anyone else has this issue and knows what to do about it?
Were you the one who disappeared in to the forest in Overlord? Rip.
Yes
It doesnt have a complete on , just momentary?
Builds coming together nicely, quick question: where did you end up buying the switch from?
Big Tex Outdoors
What type of rail panels are those?
I just watched the overlord short film and I was amazed with the tactics, the sound, the awesome looking gear and just about everything involved in it. Just after I watched scp overlord I discovered your channel and I'm now addicted. Your now by far my fav youtuber. Also I have a question, which one of the operators are you in scp overlord?(what is your gas mask?) I hope you Have a great day and keep up the awesome work.
Did you have issues getting to the 5in/lb torque value? My bolt just kept spinning. Waiting on another bolt from modlite. Great customer service as they forgot to pack 2 in the plastic sleeve.
That’s what happened to me, now I can’t get them out. Any answers?
I have a modbutton with a surefire scout. Thing is a POS, causes the light to flicker and dim the output. Customer service blames it on the tail cap. I know it's not the tail cap because it does the same thing on my buddies light with a different cap that works just fine with his pressure pad. They will not be receiving any more of my money.
Great video
Are those rail scales?
Hey, hopefully you're still reading the comments lol, but how much is 5 inch pounds??? That's the recommended torque that's specified in the installation instructions, but I have NO idea how much that is. I tried to set up mine so that the screws come out the same amount that I see on your video, how's yours holding up with that amount?
Eh, I don't use torque wrenches. Just check your tightness every now and then to watch for screws backing out.
@@ExtraordinaireThe kk thanks bud, I'm sort of new to everything and afraid of fucking up my shit by being dumb
Constant on? Or just momentary?
Does this take away the flickering that the Surefire switch has?
Yes.
@@ExtraordinaireThe ok cool, because I've had a lot of surefire switches flicker and make the light dim down
2:18 sorry if it's a dumb question, but can you explain that o-ring thing for cable management? Does it come with the Arisaka? And how do you mount it?
Not included. It's just a small o-ring to aid in managing the cable for a cleaner look.
You could use a rubber band to achieve similar results. Just slide it over the tailcap to keep the cable pressed against the light body.
@@ExtraordinaireThe ah I see, thanks for the reply brother!
What front sight is that
Kac taupe
Tell me about that KAC front sight.
It was a replica made by Vega Force Company. Just a place holder until I decided on FDE MBUS.
Is this the real surefire or the repro one from ali
This is an Arisaka 600 Series. Real light for a real AR.
If I wanted a jpc should I get it in multicam or od green.
I actually got rid of my Ranger Green gear. I think Multicam is more versatile than any solid color.
@@ExtraordinaireThe ok thanks
So what tailcap is that?
Surefire UE
what mechanics sights are those?
If you mean BUIS, then the front is Knights Armament Co.
Is this a one click constant on or have to hold the switch for constant on?
Momentary only.
Is there a switch that offers constant on, strobe or both?
@@paulythapitbull9658 you need the Surefire DS tail-cap for constant on.
Real question is where did you get the FDE arisaka light body and head?
What o-ring for the cable management?
You could use a ranger band also. They are on ebay the large works with the Geissele rails. But thats prob a 1/2" or so o ring but thats just a guess. Ranger bands are a extremely versatile item tho. Almost like duct tape versatile.
You could use a plumbing “O” seal/ring found at any hardware store.
What front sight is that?
Being chasing to see if anyone asked/answered this. That sight looks great
Replica of a Knight's Armament 99051
Slick
I have a modlite light lol
lol ok
Is modlite made by surefire?
No.
Modlite is made by Modlite.
@@ExtraordinaireThe okay cool jw. Saw on trex arms website that some of the accessories for Modlite are surefire. Would you say modlite is better than surefire?
@@raftika1 I like Modlite better than Surefire switch. It is well made, a lot shorter and attaches securely to the rail. Surefire, without the Cloud Defensive mount, is all over the place. Modlite is half the price and doesn’t need a mount.
No always on mode smh I was pass on this one
Try getting the DS-00 tailcap if you still want this switch and constant on