Woodgrain Epoxy Pen Tutorial | Inkjoy Papermate Pens | Epoxy Resin and Alcohol Inks | DIY Crafts
Вставка
- Опубліковано 20 січ 2021
- Thank you for watching this EASY DIY epoxy woodgrain pen tutorial made with refillable Paper Mate Ink Joy pens! In this tutorial, I show how to woodgrain, epoxy, and personalize these beautiful pens using vinyl. These pens are so incredibly easy, are so much fun to make, and make the best of gifts! This DIY tutorial video is designed to explain just how simple it can be to decorate anything, even a pen!
We have officially launched our KCC Glitter website, check it out here! kccglitter.com/
Check out my glitter pen tutorial here: • Epoxy Glitter Pen Tuto...
Watch my Woodgrain tutorial here: • Woodgrain Alcohol Ink ...
Please join my Facebook community! / epoxytumblersandpens
About me: I have been making epoxy tumblers for approximately five years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoffee.com/KCCyoutube
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Recommended Glitter:
KCC Glitter: kccglitter.com/
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
Products used/recommended:
Paper Mate Pens - amzn.to/3o0Lh7n
Pen Refills - amzn.to/3tSmaYk
More Pen Refills - amzn.to/3s0njuV
Wooden Dowel Rods - amzn.to/37WBrOD
Faux Rizzle Epoxy - amzn.to/3nZFM9h
Ginger Alcohol Ink - amzn.to/3o6KUbd
Bee Jay's Glitter: www.beejaysglitter.com
Counter Culture Epoxy - amzn.to/3pRzFW6
Finger Cots - amzn.to/3qprjo0
Epoxy Mixing Cups - amzn.to/3s200C0
Oracle 651 Vinyl - amzn.to/399SUCM
Cup Turner - amzn.to/3l1xBaw
Turner Foam Inserts - amzn.to/2XkuEZ7
220 Grit Sandpaper - amzn.to/3rYKC9j
Craft Knife - amzn.to/3pXOlCk
Decal Applicator - amzn.to/2MFMOm2
Vinyl Weeding Tools - amzn.to/38jAaBq
Transfer Tape - amzn.to/2Xl95HC
Butane Torch - amzn.to/3pM06wr
Rust-Oleum Flat White Spray Paint - amzn.to/3nILLz1
Gloves - amzn.to/36QSrUP
Silicone Mats - amzn.to/32YW5Lf
Cup turner motors - amzn.to/2IWXBGI
Plastic mixing cups with measurements - amzn.to/3lLARrG
Medicine cups - amzn.to/3kQFQWC
Zippo Butane Fuel - amzn.to/3lT39Ra
Cup Turner Foam Inserts - amzn.to/2UKBQfE
Painters Tape - amzn.to/3lRGuVa
Popsicle Sticks - amzn.to/3nG33fU
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicsound.com/referra...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you. - Навчання та стиль
So happy I found this video because I was searching for something for my dad and brothers for Father’s Day and this is perfect!
Aww! Yay! Thanks for watching! I hope you found it helpful!!!
I did not think of the woodgrain pen until I had already spray painted my pens, according to the glitter my Daughter chose for her supervisors on her last day....in two days. I would have made them ALL woodgrain. Even the women, using different colors. Darn it. But it's not too late if I use fast set epoxy. I plan to do glitter with UV resin cuz of time issue.
Please send me pic of them when you finish them 🥰 I'd love to see how they turn out
I thank you for this tutorial! Just wanted to share I lay my pens on top of my scraper to keep it from rolling mine has a perfect groove. ❤️
These look awesome! Can't wait to try making one .
Thanks! Thank you for watching and commenting! 🥰🥰🥰
Very nice. Thank you for sharing. 💕
Oh my goodness. I’m so glad I found you! I love these.
Thanks for watching!!!!! :)
You made it look so easy.. can't wait to give it a try!! They look great!! Thanks for sharing. ❤
It really is easy and you should definitely give it a try! 😉
I just love your workspace!!
Thank you! :) My husband built it for me!
Great idea. Turned out beautifully!
Thank you! 🥰
Loved the wood grain pens …. Can’t wait till try them
Thanks for watching! ❤️
🥰THANKS SO MUCH FOR THIS! I’m just starting out and I’ve been really wanting to make some for the men in my family! I had NO idea how one would do the wood grain look!👏🏾👏🏾👏🏾💟💟💟💟
You are so welcome!
I’m so glad you said that about sealing. I thought the first few I did that I just didn’t let it dry long enough. So I let the next batch dry for over 24 hours before sealing and they still turned a yellow color.
Yeah for some reason sealing seems to turn them yellow. 🤷🏼♀️
Another fab video. TU so much
Thank you Love!!!!!!
I just found you on youtube and also just started making the pens you make it look so easy I just ordered the paint and will be starting soon thank you for this video
You are very welcome! I'm so glad you found it helpful!!!!! 🥰 Thank you for watching!
Just to let you know I really enjoy your videos and they are very informative
Thank you so much!!! 😊😊😊
Thank you for this tutorial. I’m so glad i watched again. My woodgrain did not do well and now i see it’s because i did not epoxy the pen 1st. I also bought 4 mats and the finger cots. Thanks again.
I'm so glad you found it helpful! The epoxy before the woodgrain is definitely a must or else all the lines will show. You will love the silicone mats, they make cleanup a breeze! 🥰
Great tutorial.
Thank you so much! 🥰
I used a small wire cutter to remove it. Works flawlessly. ❤️
Great idea! 🥰
As I’m finally getting the hang of the glitter pens I see this technique 🤣🤣🤣🤣
LOL!!!! The woodgrain pens are super easy! Actually a little easier than the glitter pens ;)
@@KristisCustomCreations I’m still a little afraid of a wood grain tumbler. I think I’ll try the pen first as a little practice. LOL
@@victoriadeyot9321 you can do it! 😉 it's actually a little easier to do a tumbler than a pen in my opinion.
Omg love your work. Please show us how you do your glitter ombré pens please.... love your work
Thank you! I actually showed how I do my ombre glitter pens in my previous glitter pen video if you check my Tumbler tutorial playlist. 🥰 in that tutorial I did it with gold and white but it's the exact same process as when I do it with the pink and gold.
Any tips for putting the pen back together? I didn’t think any epoxy had gotten in the inside and I scraped the inside with my xacto knife but still struggling to the get tip back in/on
Omg I love love love the colors behind you in the video! May I ask what colors are the pink and gold? 😍😍
Thanks! The pink is "Hot Flamingo" by Glitter obsession and the gold is Poppin Bottles by Berry Humble
Hello again, how did you make your pen holders?
I tried following your video and it went well until I applied the layer of epoxy that goes on after the ink and when it started to spin it separated and almost drew out the color of the ink. I have my shop light facing my turner. Could that be making it separate? I have had the toughest time with the woodgraining pens and I LOVE them! Thanks!
How long did you let the alcohol ink dry before applying the epoxy? If the shop light is warm then the heat could have caused it to separate
I am so looking forward to try these pens your videos are very helpful. :) I have a question on the Apoxsee I see that there’s a resin A and resin B Do you have to mix those two together? And if so how much of each
Thank for watching! Yes, you have to mix part A and part B together. For the pens, you don't need much at all. I use medicine cups and I usually mix up around 5mL of epoxy. Be sure to measure evenly because it has to be just right or else it won't cure properly.
How did you make the turner for the pens? That is great!
My hubby made it for me out of a workbench that we found at harbor freight. I am going to try to do a video on it sometime in the near future. 😉
I made some of the glitter ones you showed and loved them ! Can’t wait to try these ! Quick question...I made a wood grain tumbler and my vinyl stencil left some sticky residue behind...what would you use to clean that off with ?😬🤦🏽♀️
I'm so glad that my glitter tutorial worked for you! 🥰 The area where the sticky residue is left behind.. is it left on vinyl or is it left on epoxy or on the alcohol ink? I'm just trying to make sure I fully understand the question.
@@KristisCustomCreations it’s on the alcohol ink 😬. I accidentally used a permanent vinyl. It came up but left a sticky, tape-like residue behind.
@@customdesignsbydae2420 I'm really surprised it didn't pull up the alcohol ink whenever you pulled up the vinyl. Try running your finger over it and see if it will remove the adhesive that way, if not then the best way to remove it would be with alcohol but that will mess up your alcohol ink.
nice
Thanks!
So this maybe a silly question… sorry! but, what is the equipment used to spin the pens around to dry? Does that have to be installed and where can I purchase it at? I’ve been trying to search and explain to others what I’m looking for but not had any luck! Can you please assist? lol
How do you get the towel rods to stay on the tumbler insert? I have the insert that you linked on here and use multiple layers of masking tape to tape the rods to the insert and there still moving while the turner is on 😫
Try putting rubber bands over the foam inserts. I use rubber bands now instead of the tape and it holds them perfectly.
I’m wondering if I can use a different paint instead of spray paint, I can not use spray paint at my house I have acrylic paints please let me know I want to make these
Yes, acrylic paints work for these also :)
I legit started a wood grain pen last night!!!! Great minds!!! Yours are lovely.
Lol! Too funny!! Thanks for watching! 🥰
I love that turner! Did you build it?
Thank you! My (soon to be ex husband) made it for me. Here's a link that shows more about it.. 😊 ua-cam.com/video/8H04Kb47pYg/v-deo.html
What is the black glitter you are using it is GORGEOUS !
Thanks!!! It's called "The Perfect Black" from www.beejaysglitter.com . If you use the coupon code "KRIS30" you get 30% off your order (it's a 1 time use only code). 😉
Hi I just started making these wood grain pens and I’m having trouble with the ends of the pen almost like the epoxy doesn’t go all the way to the end when it dries and makes the grain look lighter in color I did let the alcohol ink dry for some time at least an hour or 2 before epoxy don’t know what I’m doing wrong
I would probably let the alcohol ink dry longer than that. Probably a minimum of 4 hours. I haven't had any issues with them lightening up on the ends.
I realize this video is a few year's old but just came across it. I absolutely love your video's. I've only seen a few so far, if you've answered this question on a video o haven't seen yet im sorry. Do you sell these ? How much do you charge if so.
Im a bit confused on how brushing that paint on makes it look like wood, it actually did but how? Im waiting on on $$ for more supplies. Id really like to try something WITHOUT glitter
I'm not currently selling them, just teaching others how to do it. When you brush the alcohol ink onto the spray painted pen, as it dries and you brush it, it gives a wood grained look to it. Check out the video I posted about doing the wood grain tumbler, is the exact same process, just a larger object. It will probably make a bit more sense watching it done on a larger object. I hope this helps!
And thank you so much for watching and the kind words! 🥰
I was so excited to try this and it looked great until I tried to put the epoxy over the ink. It all turned yellow! I didn't seal it, but I let it dry for 2 days before I got back to work on it. I'm wondering where I went wrong?
Is there a difference on doing the spraypaint and wood grain effect before the 1st layer of epoxy?
Yes, there are lots of small lines and indentions on the pen before epoxy so if you woodgain it before epoxy then all of those lines will show in your woodgrain.
Where did you get the holder the use for the pens when turning?
It's a foam turner attachment that I purchased on Amazon amzn.to/2PJ83Fk
I have a question for you. I just made my first attempt at doing a woodgrain pen using the alcohol inks. Whenever I put the first layer of ink on and let it dry a bit, I'll do a second coat and for some reason, it seems to pull the first layer up or make it lighter. I can't seem to get a smooth woodgrain look after that first layer. It's almost like I have to dab the ink on instead of brushing it to keep from the previous layer becoming light or like lifting up. Hopefully you understand what I'm trying to explain.
I understand exactly what you are trying to explain. It's really hard to kind of put into words how to avoid that issue but yes the new alcohol ink will take the old alcohol ink away. If you can put a little bit on there and let it start drying slightly before you start brushing it then that does help to keep more ink on the pen. I hope that makes sense. It's weird how some cups/pens do it more than others for me. As you work more and more with the alcohol ink, you will get the hang of exactly how to work with it as it dries. Blowing on it while brushing it on can help it dry faster as you are brushing it which will also help prevent it from removing the ink some. I really hope that makes sense. Have you seen the l my cup tutorial doing the woodgrain?
hi, thanks for this tutorial. if we don't have that specific color- ginger, can we use just brown? or what alternative/improvise can we use for this method? thanks!!
You can use whatever color Brown you have.. I personally prefer to use Ginger when I make mine but you can definitely use another Brown. 😊
@@KristisCustomCreations thanks,, I wasn't sure what else was ok to use for wood grain style . Lol. Thx for the tutorial
@@babydzcreationz510 you're very welcome! 🥰
Has anyone glued(e6000)the holder clip back on??
I have not tried but I have seen where people have purchased different pen clips on Amazon and glued them on. :)
Hi Kristy, Can you use the regular Ink Joy pens or just the gel ones? Thanks, Phil
If you can take the pen apart, put it in a spinner, and put it back together then you can. I've seen many other people use other pens but I just stick to these 😊
What is that thing that is around the pvc pipe you put the pens on?
It's a foam cup Turner insert from Amazon 😊 there's a link to them down in the description box. 😉
I see you changed up your technique to epoxying before paint...this is genius!
Yes ma'am! It makes the pen smooth before the paint 😊
@@KristisCustomCreations did you do this for your glitter pens too, or just non-glitter? 🙂
@@francescajohnson just my non-glitter pens 😊
@@KristisCustomCreations awesome! Thank you!
@@francescajohnson you're very welcome!
HELP started doing the woodgrain pen following your directions I sanded cleaned put epoxy on let it dry but when I went to spray paint the paint just ran off what did I do wrong
It sounds to me like something is either wrong with your spray paint or the spray paint can wasn't shaken enough before spraying. I've never had spray paint just run off of epoxy before. 🤷🏼♀️
Do you need to sand the epoxy before spray painting
@@lindareifsnyder897 No, you don't. Just spray right over the epoxy once it is dry.
I tried to make one with a teal alcohol ink and it looks like it's cracking. Any suggestions?
Did you let the paint dry all the way? A lot of times humidity or other factors like that can cause the paint to crack
Hey girl, I know this was in Jan but can you remember the names of the glitter that's on the pens in the background? The pink, gold and black glitter is what I'm seeing. They look gorgeous.....TY
Thanks! The black is "The perfect Black" by Bee Jay's Glitter, the gold is "Poppin Bottles" by Berry Humble, and the pink is "Hotter than You Pink" by It's Pretty Personal. 😊
Can you please tell me what black glitter you use?
I use Blackout Drunk by Berry Humble then I add a tiny pinch into my epoxy of Silver Fox by Mr Nolas to give it just a little bit extra shine.
Why do you use a blow torch versus a hear gun? I’m just curious because I may need to buy a torch
I found that the torch is WAY better at popping micro bubbles then the heat gun is.
@@KristisCustomCreations That’s what I thought. Ok. What type of torch do you recommend? Thank you so much! You are the BEST at what you do! Your videos are awesome and you give so much detail.
@@jacquelinemcclarn9258 aww! Thank you so much! It's just a butane culinary torch that I bought on amazon. I actually have it linked down in the description box below the video so that it's easier to find. Thank you for the sweet compliments, that really makes my night! 🥰
I have let my alcohol ink dry and when I try to go over my pen again to make it darker it's like it lifts the first layer of alcohol ink off. Could it be the cheap white spray paint I am using?
No, it isn't the spray paint. When you put alcohol ink over dried alcohol ink, it pretty much lifts it up because it's alcohol that you are putting over the alcohol ink. I basically try to do the alcohol ink all at one time and try to build up layers of it as I work with it in order to make it darker. I have found that if you blow on the alcohol ink while it's on your PIN or cup, it helps it dry faster which helps it thicken up to darken the color of it. I hope that makes sense.
What do you have around your turner?
It's a foam cup insert that I purchased on Amazon. I have a link for them down in the description box. 😊
Hi! So I’m hoping you can help me out!😭
I have been following your glitter pen video and of course wanted to surprise my husband with a wood look pen. But my ink stays streaky, I did use the white gloss paint i had on hand. Is it supposed to be matte? Thank you!!😊
I think that's the problem.. I only use matte paint with mine 🥰
@@KristisCustomCreations noted! I’m going to get some matte paint and give it a go! Thank you so much!🥰
@@deelopez9456 You're very welcome!!!
I cant fine the black pens can you use the color ones?
Yes ma'am, you can use the color ones. Amazon has the black pens in stock. I have them linked down below in the description box. 😊
That’s a LOT of “pen guts”! You must make a ton of pens.
Yes! I currently have about 76 pens going 🤦🏼♀️😂
I was thinking the same thing when I saw that bag. But she is so good at it...they’re all so beautiful 🤩!
@@customdesignsbydae2420 😂 aww, thanks! 🥰 You are so sweet!!! ❤️
@@KristisCustomCreations you’re welcome hon. It’s true 🙂!
I just started making these! What do you charge for a glitter one?
I currently charge $10 each
What grit is the sandpaper?
220 grit 😊
I sprayed paint my pens first, can I epoxy over it and put the wood grain on top of the expoxy
You can Epoxy over the spray paint but you will need to spray it again over the epoxy. The alcohol ink sticks to the paint much better than it will to the Epoxy
@@KristisCustomCreations 🤔🤔ooooohhhhhh good to know!💟💟💟
Can u make this with uv resin?
@@nunyabusiness1999 yes you can 🙂
What brand of pens do you use? Ty
I use the Papermate Inkjoy pens
I started making a couple of these and the alcohol inks started removing the white paint. I painted them yesterday, so I don't think I started too soon. I repainted and applied a coat of epoxy. Hopefully, they'll do better tomorrow.
What kind of paint did you use and was the paint completely dry? If the paint isn't completely dry then the alcohol ink can remove it as you are describing.
Yeah. I let it sit for 24 hours at least. It was Rustoleum flat white.
Hmm... I'm not sure why then. I've never had a problem with that before
I'm going to try again today. I put a layer of epoxy on them yesterday to see if that helps. If not then 🤷♂️
@@marcsmith6068 what kind of alcohol inks are you using? I'm never had a problem with my Tim Holtz alcohol inks messing up the paint. Just trying to help figure out what the issue may be.
Is this epoxy good to use epoxy top coat clear sta Crete clear uv ?
I have never used that brand epoxy before. My two go-to brands are Tumblerpoxy and Faux Rizzle.
@@KristisCustomCreations thank you so much for getting back to me. Hopefully this epoxy works.
@@KristisCustomCreations is there a turner you recommend?
@@cindys3281 my husband may my turners for me but this one on Amazon looks like a pretty good one. amzn.to/3cFcBnC There are also turners on Etsy that look pretty decent. :)
@@KristisCustomCreations thank you...
that’s nice ur husband makes them.
Are you in Pensacola? I just randomly found you, watched the video, and then saw "Sandy Sansing Chevrolet"
Yes Ma'am I am!!!!!! Are you?
@@KristisCustomCreations I AM! We moved here about 4 years ago!
@@MakeupByLauraG awesome!!! 🥰
what font did you use for your husband's name on the wood grain pen
The font for his name is "Impact" 😊
Ok girl...I saw your TikTok...go on and show us how you do the tips !!!🤣🤣
😂😂😂 that's a pretty good idea! 😉 Might have to be a new video very soon!
@@KristisCustomCreations yesssss...👏🏽🙏🏽🤞🏽!!!
What on earth did we do before Amazon?!
Omg, I know right!
I ended up getting a Dremel because I discovered that when I take a craft knife I try to cut off my fingers😭😭😭😭
That's a great idea! 🥰 Thanks for the tip!
@@KristisCustomCreations im impressed ..you are definitely way better with that knife than i am:)
@@aprilowens2012 🥰 thank you