Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B
Sometimes a U sounds like a U and NOT double O. So far you’ve mispronounced Stihl, McCulloch, Husqvarna and possibly others but you do look great in those Echo chaps. :D bloody Americans :D
Love watching you. Anytime I have a problem videos. You helped me figure out why my echo weed eater had no power. Turned out to be a stopped up exhaust screen. Just like you said.
I came across your video's searching how to fix my cub cadet wheeled trimmer. I am 61 yrs old, on a fixed budget and trying to fix my yard machines, I took a small engine class like 40 yrs ago but still remember some of the repaired stuff and I tell you, your video's have taught me so much, so thank you very much. Now all I need to do is collect/buy the tools I need to actually fix them. I have and continue to watch and learn from you. You are the best when it comes to showing and explaining how to fix things. Again thank you. Rita
What makes a good mechanic? You are a good example of a good mechanic! My personal belief is that 50% of being a good mechanic is PERSEVERANCE (STEADFASTNESS)never stop until you determine all the factors that make a correct decision to stop or fix.
Good morning Bre, you're going to soil your nice Stevie Nicks Tee shirt. I watched that movie sling blade in 1996 when it first came out. RIP John Ritter. Always enjoy your videos. Glad to see you are back on the repairs. Greetings from sunny Myrtle Beach SC.
Love your channel! I work at our rural dump and get so many small engines, saws trimmers blowers, they all work with a little TLC, there are no small shops that repair like yours in our area so people pitch and replace.
For flushing fuel tanks, I empty them as much as possible, spray a couple seconds of carb cleaner, close it up and shake it around, dump it, and then take my air gun and blow in it while it's upside down. Comes out as clean as new.
You are expert and thorough in all your videos and I like the fact that you give the links to where we can get the tools you use . Keep up ythr good work and keep the videos coming!
I am fascinated when I watch your videos. When younger I wanted to learn more about motors but did the mom thing alone which didn't allow me free time to try it. Seeing you diagnose such a variety of machines is very entertaining to me.
I've watched you (and have learned from you) for a while now. This format of "daily diagnosing" is my favorite! I especially appreciated the reality of the "fails". Makes me feel better that I just can't get that one piece of equipment to work right. This format should be one you do at least monthly. I grabbed a cup of yogurt, and relaxed during wind down for the night. LOVED IT!!!
That's exactly what she said. I'm sure if the customer wants to pay the labor charges for that, she'd be happy to do it. It's still a gamble on both sides that sealing is all it needs.
So pleased business is going really well for all of you. It must of been a huge decision moving out of the old shop. I'm relieved I have the opportunity to learn more from you. Every video is a school day.🇬🇧🏴
Have you ever thought about building a chain saw starting station? Sounds silly but I built one that basically holds my chain saw down while I pull the rope instead of me putting my foot on it. I have one saw that I have to depress the trigger ever so slightly to get it to start and I dont have enough limbs to step on it, hold the handle and pull the cord. Its a half inch board I weather proofed and a piece of hard plastic that I slip the bottom of my chain saw handle into. It holds it secure to the ground with no movement. Love your content. You have helped me fix two of my saws in the past.
@@scottreynolds1984yes and no. It’s also up to the mechanic if they want take to time to work on it. When you have tons of customers it’s not really great to spend a ton of time on one thing. Especially a 40 year old machine that you may not be able to find parts for.
@@scottreynolds1984well, we don’t know if the customer had already said how much to spend on it. Some of those saws would only be worth $300 in good running shape. Parts for the bad cylinder and piston saw would be $200 for oem if you could find it. Autotune saws are a PITA for small shops to deal with so that’s understandable. She doesn’t have unlimited time to track down penny ante problems in the busy season.
@@JoeGraves24 so the easy jobs get done first to hard baskit customers have to wait till it suits her , i wouldnt be waiting around for her id go else where , thats called looking after her self not the customer interests stiff if they use saws for there buisness , and cant make money
I've been looking for an older lawnmower that doesn't have all the crap i don't need on it or in the engine that breaks easy. u know find a lil 38" and rebuild the engine and pully system, a miner rebuild. i had a craftsman from the mid 90s i should have never gotten rid of. only one safety off on the seat, and that was disconnected by me. lol. i like how u just tell it like it is, no BS. like it should be, thank u for your time.
Good Morning Bre! Looks like you having fun lol and the way you get them plugs out I wouldn't want to see ya mad .... Have a great day and Thanks again.
My friend has a 028 sthil and I fixed it up cleaned it out pulled the tank filter and popped a new plug in clean the air filter ran a abit of seafoam in the tank and she ran like a boss
From cowboy1: Have learned much from you. On the ranch, we used a paste on a stick to see if water was in diesel fuel. If water was present, the paste turned a different color.
At first I went to your videos totally for help fixing my Deere 100 series and my Son-in-Law's. Today I checked in because I wanted to see how you diagnosed problems with small engines- especially chain saws. Your experience and skill was shining as per usual, and you never disappoint with at least a couple of good laughs too! It's not just instructive- you are entertaining too. I think this video is the best I've seen so far due to the systematic unraveling of the machine's issues and fixing them. I have got to get an endoscope and that remote tach too! So much fun and valuable tips are present here . I've got a TON of respect for you as a PRO-TECH! George in Scituate, MA
Did you every hear the old one "I just love work.......I could watch it all day! ha ha. No one can say you do not earn your money. You must be pretty tired at the end of a "normal day". Love the efficiency that you have tools and parts within reach.
watched a video where they had a problem with the vent port for fuel pressure that was plugged up from the factory. He had to drill it out. The saw would start, but wouldn't stay running. After he did that, it ran fine. Love your videos!!
This comment is a lot more important than you think. The wildland fire service has been plagued with "geysering" problems. I'll spare you the details but this vent seems to be the elusive common denominator. Nice catch on that.
I have a Husq. Med. Duty Saw that I bought new over 32 years ago, it has probably cut two semi loads of wood, has never failed me. I have replaced couple bars and countless chains and don't ever remember replacing spark plug. I keep Fuel Stabilizer in it, just used it the other day, 2nd. pull and it started like it always does. Don't know if Newer Ones are made as good as this one but this Chainsaw has been a Testament to Husq. Quality...
You talk about your spring weather. Here in VT we got 3" last night and starting Friday night, 5-10". Just about a week ago I had all my outdoor equipment out and our snow was almost gone!!! Happy Spring.
I really enjoy your videos, they are cery entertaining and also contain so much information. I've successfully used your "how to" informative vids to repair items at my home. I also greatly appreciated the included bit about "Slingblade" and the video taken in the restaurant! Continue your wonderful vids and i'm praying that your husband and yourself be well and healthy. 😊
Thank you for the very informative videos,I watch some of the other repair videos that feature men mechanics and they are helpful, but you break everything down and make the solution clearer for me to understand.Please keep up the good work.
I bought a oh 29 steel back in about 1995 out of a pawnshop in White center in Seattle and I’ve been using it ever cents runs good now I use Amsoil two-stroke oil and it still runs very good
I took a couple Stihl chainsaws to a Stihl dealer because they wouldn't start. Said they were all scored up in the cylinder and were dead. I bought a new one and took the old ones home and put them in the shed. 7 years later I pulled the 038 AV Magnum 2 out to look at it. replaced the spark plug and sprayed a bunch of carburetor cleaner through it and it started right up. That was about 4 years ago and I am still using it, runs great. Did the same thing to the 170 and it runs too. I haven't looked in the cylinders to see if they are scored up or not, just know they run.
Wonder how the heck she keeps her hands so clean! Whenever I work on any kind of machine, my hands are filthy dirty almost immediately! LOL Lots of fun, and informative to watch. Always like to watch experts doing their thing.
I enjoy watching your videos and learning. You make it look easy. The Stevie Nicks concert was great! I saw her down here in Arlington, TX, this year. I'm glad you are a fan of hers.
Im get my equipment ready for spring cleanups as i watch these video's, i been fixing stuff for a living for a long time and i still have learned alot from your channel. Thank you.
The not worth fixing - too old, take too much time, or parts aren’t available is a common thread in ANY repair facility. I have a computer repair business and it works exactly the same way. Some days you fix it all with minimal effort. Others you turn all of it away because you can’t fix it within a reasonable result. Either time, money, or availability. Enjoyable content and great reasoning on your part. Keep it up.
Just want to say thank you for the tip on the Mantis. Went out and got a great deal on an old ugly one that does just beautifully on my front yard 2,000 sq ft Took me a day but saved my arms and back. Thanks for your full hearted endorsement of these great mighty mites. Mantis 2 stroke👌👍🏻💪
Such knowledge you have....I know you do this for a living and you're super great at it.....just keep it up and I'll keep watching......I'm learning stuff here....lol and thank you
I just did a John Deere Gator today that has a fuel tank filled with water... The owner installed a brand new carb and fuel pump... Even with those parts they still won't run on water... No matter how many parts you throw at it they still don't run on watered fuel... By the way... There's such a thing called a hang test... This could save you some time hooking up a compression gauge... Both Husqvarna and Stihl have specifications for the hang time tests on various models... I don't work on Echo much but I couldn't imagine them not having either the same thing or something similar...
married w small engines does the gas, check down the cylinder, and is fast at checking to see if there is a gas line leak, vent, and crank is air tight, does it all pretty quick
8 місяців тому
I have EXACTLY the same problem with my saws that is in this video on 13min to 14 min. My fix is new gas and keep it idling for a 10minutes. Sometimes it fixes the problem. Key is to throw old petrol away and put new clean not mixed petrol in this saw tank, let it idle for a while and then throw that petrol away and put new 2t mixture in tank before give it more revs.
One thing I learned was don’t get sloppy with your oil mix. I put too much oil in fuel once, it got so thick it wouldn’t pass fuel through really small jets. Changed fuel with proper 50/1 2 stroke oil and it ran fine. Lesson, mix oil and fuel in correct ratio.
Great content. I ran Husky’s first years but they had old style real carburetors. These new ones with proprietary software and need to reset protocol have made me move on to other brands like Echo
I used to do this type of work on the side of my regular job and pretty quickly I found out how many people needed work done. I used to pick up mowers left by the road and take them home to work on them. I can’t tell you how many people hit something solid and sheared the aluminum key off the flywheel. New key and away we go. Some of those mowers were brand new. I was selling them pretty cheaply and the next thing you know I have a wad of cash in my hand. Chainsaws were my specialty because I loved two strokes. I used to go to police auctions and pick up old saws. They usually sat in the property room for a long time before they sold them, so they needed new fuel lines and carb cleaned. Those criminals will steal anything they can get their hands on.
Great segment on what not to buy electronic new pieces of junk design to fail and cost more they're worth buy vintage saws easier to fix even if needs a couple seals or carburetor kit which two those saws needed
Well, !, number one you should check is compression. and with your experience, you already feel how the motor rotated. You can almost surely say, it has compression or not . But by the book the troubleshooting starts with compression and not the search for water or scars in the cylinder walls.
Interesting episode, I own a 372 XP saw, it also has a pressure relief button on it for starting, but seems to have the identical carb problem!!, when I get it running good it works good, but when it starts stalling out??😮
I take it from the noise that you have an upstairs in the building. My son bought me one of those scopes for Christmas year before last. I've only used it one time and that was to look up the pipe for my wood stove. Pretty neat!
When reving the engine you remained bent over, man, my back just started aching watching you. At my age that's a game changer! As always thanks for the insight and sharing of so much useful information! Respectfully Paul R in TX.
Awesome video as always. I love the ms290 saws. I'd like to have that one that's blown up looking for one now to rebuild and do a 390 cylinder swap on. Just a nice all around light saw that with a few mods on will dependably cut firewood all day and do it fairly quickly. When I start on my wood pile I like to have 3-4 saws lined up when one runs out of gas grab another and keep bucking. At the end of the day sharpen blow them off and fill them up and do it all again the next day until I'm done. Cheaper saws to find being older and easy to get parts for. I picked my second one up for $125 and replaced muffler and chain brake with aftermarket parts and had less than $200 in it. Well worth the time and money.
Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B
So I have an opinion, that you dislike these E tronic, auto tune saws
Sometimes a U sounds like a U and NOT double O. So far you’ve mispronounced Stihl, McCulloch, Husqvarna and possibly others but you do look great in those Echo chaps. :D bloody Americans :D
Love watching you. Anytime I have a problem videos. You helped me figure out why my echo weed eater had no power. Turned out to be a stopped up exhaust screen. Just like you said.
How do you remove the debris from the bottom of the tank ? 4:38
I have worked on small engines of my own for 60 years, I learn something every time I watch, Thanks
Me too.
...and me!
Thanks Mark!
I came across your video's searching how to fix my cub cadet wheeled trimmer. I am 61 yrs old, on a fixed budget and trying to fix my yard machines, I took a small engine class like 40 yrs ago but still remember some of the repaired stuff and I tell you, your video's have taught me so much, so thank you very much. Now all I need to do is collect/buy the tools I need to actually fix them. I have and continue to watch and learn from you. You are the best when it comes to showing and explaining how to fix things. Again thank you.
Rita
Sitting here with a coffee, snowed in, (!) and watching Chickanic. Doesn't get any better. Thanks, Bre!! 😃
Yes sir that's what I was just doing drinking coffee and watching
What makes a good mechanic? You are a good example of a good mechanic! My personal belief is that 50% of being a good mechanic is PERSEVERANCE (STEADFASTNESS)never stop until you determine all the factors that make a correct decision to stop or fix.
Just got home from work and can have my lunch with Chickanic. Good day!
SO GLAD UR BACK UP N GOIN .....I HAVE SO MUCH 2 STROKE STUFF TO LEARN
I know very little about small engines, so I find your channel fascinating. You have a great way of presenting and explaining. Thanks.
You learn by tinkering
Good morning Bre, you're going to soil your nice Stevie Nicks Tee shirt. I watched that movie sling blade in 1996 when it first came out. RIP John Ritter. Always enjoy your videos. Glad to see you are back on the repairs. Greetings from sunny Myrtle Beach SC.
Love your channel! I work at our rural dump and get so many small engines, saws trimmers blowers, they all work with a little TLC, there are no small shops that repair like yours in our area so people pitch and replace.
For flushing fuel tanks, I empty them as much as possible, spray a couple seconds of carb cleaner, close it up and shake it around, dump it, and then take my air gun and blow in it while it's upside down. Comes out as clean as new.
Serious question - what do you do with the old gas you dumped out of the fuel tank?
Carby cleaner can be a bit rough on O rings and stuff like that. It can end up creating more issues than it solves if it gets into the carby.
I love this I worked in a mower shop for seven years and this was a normal day
You are expert and thorough in all your videos and I like the fact that you give the links to where we can get the tools you use . Keep up ythr good work and keep the videos coming!
I am fascinated when I watch your videos. When younger I wanted to learn more about motors but did the mom thing alone which didn't allow me free time to try it. Seeing you diagnose such a variety of machines is very entertaining to me.
I've watched you (and have learned from you) for a while now. This format of "daily diagnosing" is my favorite! I especially appreciated the reality of the "fails". Makes me feel better that I just can't get that one piece of equipment to work right. This format should be one you do at least monthly. I grabbed a cup of yogurt, and relaxed during wind down for the night. LOVED IT!!!
That great 40+ year old Stihl 045 needs pressure tested to find the air leak(s) then replace faulty gaskets, intake boot or crank seals.
That's exactly what she said. I'm sure if the customer wants to pay the labor charges for that, she'd be happy to do it. It's still a gamble on both sides that sealing is all it needs.
Stevie Nicks fan!!! I guess we all fall into that category.
So pleased business is going really well for all of you. It must of been a huge decision moving out of the old shop. I'm relieved I have the opportunity to learn more from you. Every video is a school day.🇬🇧🏴
Have you ever thought about building a chain saw starting station? Sounds silly but I built one that basically holds my chain saw down while I pull the rope instead of me putting my foot on it. I have one saw that I have to depress the trigger ever so slightly to get it to start and I dont have enough limbs to step on it, hold the handle and pull the cord. Its a half inch board I weather proofed and a piece of hard plastic that I slip the bottom of my chain saw handle into. It holds it secure to the ground with no movement.
Love your content. You have helped me fix two of my saws in the past.
2 out of 6 repaired not good odds, and not good for customer confidence , isnt it up to the customer if they want there 40 year old saw repaied
I had to do the same because my boot doesn't fit in the handle of my Husky 372. Using a spring clamp on the throttle also helps sometimes.
@@scottreynolds1984yes and no. It’s also up to the mechanic if they want take to time to work on it. When you have tons of customers it’s not really great to spend a ton of time on one thing. Especially a 40 year old machine that you may not be able to find parts for.
@@scottreynolds1984well, we don’t know if the customer had already said how much to spend on it. Some of those saws would only be worth $300 in good running shape. Parts for the bad cylinder and piston saw would be $200 for oem if you could find it. Autotune saws are a PITA for small shops to deal with so that’s understandable. She doesn’t have unlimited time to track down penny ante problems in the busy season.
@@JoeGraves24 so the easy jobs get done first to hard baskit customers have to wait till it suits her , i wouldnt be waiting around for her id go else where , thats called looking after her self not the customer interests stiff if they use saws for there buisness , and cant make money
I have an 029 handed down from my Dad. Still runs great
I've been looking for an older lawnmower that doesn't have all the crap i don't need on it or in the engine that breaks easy. u know find a lil 38" and rebuild the engine and pully system, a miner rebuild. i had a craftsman from the mid 90s i should have never gotten rid of. only one safety off on the seat, and that was disconnected by me. lol. i like how u just tell it like it is, no BS. like it should be, thank u for your time.
Welcome to the spring Rush on getting All of your customers small engine equipment fixed up and running again Bre
You have been a great help. I tried to start mowers with old gas. You set me straight.
Your careful methodical proactive to each problem has helped me to evaluate my 2 chainsaws(stihl and Husky). Th new s looks great! Thanks
Good Morning Bre! Looks like you having fun lol and the way you get them plugs out I wouldn't want to see ya mad .... Have a great day and Thanks again.
My friend has a 028 sthil and I fixed it up cleaned it out pulled the tank filter and popped a new plug in clean the air filter ran a abit of seafoam in the tank and she ran like a boss
From cowboy1: Have learned much from you. On the ranch, we used a paste on a stick to see if water was in diesel fuel. If water was present, the paste turned a different color.
So good to see you in your new and beautifully organised space, Bre 😊👍 Chickanic is "reborn" 👍
I can't wait to show you the whole place!
@@Chickanicme either. OH how I wish that I could still come to your place to do business…but such is life I guess.😢
She really knows how to work the bugs out! That was so funny when that bug ran out of the chainsaw. You're such a brave lady! 😅😂😅😂😅😂
At first I went to your videos totally for help fixing my Deere 100 series and my Son-in-Law's. Today I checked in because I wanted to see how you diagnosed problems with small engines- especially chain saws. Your experience and skill was shining as per usual, and you never disappoint with at least a couple of good laughs too! It's not just instructive- you are entertaining too. I think this video is the best I've seen so far due to the systematic unraveling of the machine's issues and fixing them. I have got to get an endoscope and that remote tach too! So much fun and valuable tips are present here
. I've got a TON of respect for you as a PRO-TECH! George in Scituate, MA
Did you every hear the old one "I just love work.......I could watch it all day! ha ha. No one can say you do not earn your money. You must be pretty tired at the end of a "normal day". Love the efficiency that you have tools and parts within reach.
The fun never ends with Chickanic! Thank you for all the help you provide.
I came across your videos the other night and wow just amazing knowledge you have. Thank you for sharing your knowledge
watched a video where they had a problem with the vent port for fuel pressure that was plugged up from the factory. He had to drill it out. The saw would start, but wouldn't stay running. After he did that, it ran fine. Love your videos!!
This comment is a lot more important than you think. The wildland fire service has been plagued with "geysering" problems. I'll spare you the details but this vent seems to be the elusive common denominator. Nice catch on that.
I have a Husq. Med. Duty Saw that I bought new over 32 years ago, it has probably cut two semi loads of wood, has never failed me. I have replaced couple bars and countless chains and don't ever remember replacing spark plug. I keep Fuel Stabilizer in it, just used it the other day, 2nd. pull and it started like it always does. Don't know if Newer Ones are made as good as this one but this Chainsaw has been a Testament to Husq. Quality...
great segment. good to see the thought process and repair procedures.
As a fan of small engines and an owner of many of all sorts I appreciate that you run into all the same issues, and fix them.
Thank you for this day in the shop Bre! Learned some thing new!
Thanks for all you teach us
You talk about your spring weather. Here in VT we got 3" last night and starting Friday night, 5-10". Just about a week ago I had all my outdoor equipment out and our snow was almost gone!!! Happy Spring.
Your one in a million ✔️💯 from Melbourne AUSTRALIA 👍🤠
I really enjoy your videos, they are cery entertaining and also contain so much information.
I've successfully used your "how to" informative vids to repair items at my home.
I also greatly appreciated the included bit about "Slingblade" and the video taken in the restaurant!
Continue your wonderful vids and i'm praying that your husband and yourself be well and healthy. 😊
I’m learning so much watching your troubleshooting process, thank you, all these small engines can be confusing. Cool shirt! 😎
Always informative, interesting and honest! Thank you for sharing your knowledge and expertise .
Thank you for the very informative videos,I watch some of the other repair videos that feature men mechanics and they are helpful, but you break everything down and make the solution clearer for me to understand.Please keep up the good work.
I have an 026 Stihl I bought 30 yrs ago used for 100$! Man that has been a good saw! Only one time have I 😊failed to crank it!
I bought a oh 29 steel back in about 1995 out of a pawnshop in White center in Seattle and I’ve been using it ever cents runs good now I use Amsoil two-stroke oil and it still runs very good
thank you for sharing your diagnostic procedure. I learn a lot from your videos, and have gotten introduced to some great tools. thank you
I took a couple Stihl chainsaws to a Stihl dealer because they wouldn't start. Said they were all scored up in the cylinder and were dead. I bought a new one and took the old ones home and put them in the shed. 7 years later I pulled the 038 AV Magnum 2 out to look at it. replaced the spark plug and sprayed a bunch of carburetor cleaner through it and it started right up. That was about 4 years ago and I am still using it, runs great. Did the same thing to the 170 and it runs too. I haven't looked in the cylinders to see if they are scored up or not, just know they run.
Wonder how the heck she keeps her hands so clean! Whenever I work on any kind of machine, my hands are filthy dirty almost immediately! LOL Lots of fun, and informative to watch. Always like to watch experts doing their thing.
Congratulations, I’ve really enjoyed your channel. Thanks for your insight on fixing small engines.
I'm expecting several of the tools you use tomorrow, so I will be able to take advantage of your wisdom. Thank you ma`am.
Just found this channel, so good. Love the step by step diagnostics - super helpful when learning! Thank you!
Thanks so much Bre, I learn so much from you and all your video's.
I enjoy watching your videos and learning. You make it look easy.
The Stevie Nicks concert was great! I saw her down here in Arlington, TX, this year. I'm glad you are a fan of hers.
Im get my equipment ready for spring cleanups as i watch these video's, i been fixing stuff for a living for a long time and i still have learned alot from your channel. Thank you.
I keep coming to this channel over and over again
Thank You for your service and helping with good ideas
Loved it - most impressed especially with starting pulls. After the number you did with this lot I'd need a day off.
The not worth fixing - too old, take too much time, or parts aren’t available is a common thread in ANY repair facility. I have a computer repair business and it works exactly the same way. Some days you fix it all with minimal effort. Others you turn all of it away because you can’t fix it within a reasonable result. Either time, money, or availability. Enjoyable content and great reasoning on your part. Keep it up.
Spray some break cleaner around the carb, seals, boot, base gasket. Where it dies is where it is leaking.
Just want to say thank you for the tip on the Mantis. Went out and got a great deal on an old ugly one that does just beautifully on my front yard 2,000 sq ft
Took me a day but saved my arms and back. Thanks for your full hearted endorsement of these great mighty mites. Mantis 2 stroke👌👍🏻💪
Such knowledge you have....I know you do this for a living and you're super great at it.....just keep it up and I'll keep watching......I'm learning stuff here....lol and thank you
Love how practical your approach and videos are. Way to go.
I just did a John Deere Gator today that has a fuel tank filled with water... The owner installed a brand new carb and fuel pump... Even with those parts they still won't run on water... No matter how many parts you throw at it they still don't run on watered fuel...
By the way... There's such a thing called a hang test... This could save you some time hooking up a compression gauge... Both Husqvarna and Stihl have specifications for the hang time tests on various models... I don't work on Echo much but I couldn't imagine them not having either the same thing or something similar...
married w small engines does the gas, check down the cylinder, and is fast at checking to see if there is a gas line leak, vent, and crank is air tight, does it all pretty quick
I have EXACTLY the same problem with my saws that is in this video on 13min to 14 min. My fix is new gas and keep it idling for a 10minutes. Sometimes it fixes the problem.
Key is to throw old petrol away and put new clean not mixed petrol in this saw tank, let it idle for a while and
then throw that petrol away and put new 2t mixture in tank before give it more revs.
Excellent and informative. Thanks for taking the time to make these videos
Lol worked the bug out of one . Great tip’s thanks now to choose a 42” zero turn
Your episodes are GREAT! - Learn something new every time...ALSO.. you are one COOL 'CHIC' - Keep up the work!
Your new shop looks GREAT!
One thing I learned was don’t get sloppy with your oil mix. I put too much oil in fuel once, it got so thick it wouldn’t pass fuel through really small jets. Changed fuel with proper 50/1 2 stroke oil and it ran fine. Lesson, mix oil and fuel in correct ratio.
Hey, great vid. Very methodical troubleshooting. I’ve learned a lot. Thanks.
I'm a fan of the figure-8 knot. Thanks for the video.
On your 045 I would definitely say it needs another carburetor. My ms 250 wouldn't adjust so I put a new carburetor on it and it ran like a charm.
U rock gurl....that, from a 65 year old goat. Attractive physically, mentally, spiritually. Honest to a fault, shared.
Love this. More Diagnosing and Fixing video's please!
Great content. I ran Husky’s first years but they had old style real carburetors. These new ones with proprietary software and need to reset protocol have made me move on to other brands like Echo
I used to do this type of work on the side of my regular job and pretty quickly I found out how many people needed work done. I used to pick up mowers left by the road and take them home to work on them. I can’t tell you how many people hit something solid and sheared the aluminum key off the flywheel. New key and away we go. Some of those mowers were brand new. I was selling them pretty cheaply and the next thing you know I have a wad of cash in my hand. Chainsaws were my specialty because I loved two strokes. I used to go to police auctions and pick up old saws. They usually sat in the property room for a long time before they sold them, so they needed new fuel lines and carb cleaned. Those criminals will steal anything they can get their hands on.
Nice looking shop
Great segment on what not to buy electronic new pieces of junk design to fail and cost more they're worth buy vintage saws easier to fix even if needs a couple seals or carburetor kit which two those saws needed
Yep. Storm season there. I lived in Blevins, Arkansas 10 years ago.
Well, !, number one you should check is compression. and with your experience, you already feel how the motor rotated. You can almost surely say, it has compression or not . But by the book the troubleshooting starts with compression and not the search for water or scars in the cylinder walls.
I heard seafoam is the best there is for keeping gas good for a long while. Love your advice!
Bre you are a tonic, great content as usual
Interesting episode, I own a 372 XP saw, it also has a pressure relief button on it for starting, but seems to have the identical carb problem!!, when I get it running good it works good, but when it starts stalling out??😮
You’ve got great patience girl. Your process of elimination is inspiring. Thanks Gil
Interesting video, thanks. Would love to see a similar video specifically on string trimmers, maybe another on walk behind mowers.
Great video and diagnostics! Thanks!
On the 045 stihl are known for the intake coming loose, new intake and carb base gasket usually solves the problem.
Holy Crow!!! Auto Tune? Who'd of thunk it, computerized chain saws. That 045 deserves to be kept alive. Nice vids!
Thanks for the tips you share in each video. The shop and loft looks amaxing.
Thanks for all the knowledge you share
You really do outstanding work, I enjoy your videos.
I take it from the noise that you have an upstairs in the building. My son bought me one of those scopes for Christmas year before last. I've only used it one time and that was to look up the pipe for my wood stove. Pretty neat!
I love Stevie Nicks !!!
When reving the engine you remained bent over, man, my back just started aching watching you. At my age that's a game changer! As always thanks for the insight and sharing of so much useful information! Respectfully Paul R in TX.
Awesome video as always. I love the ms290 saws. I'd like to have that one that's blown up looking for one now to rebuild and do a 390 cylinder swap on. Just a nice all around light saw that with a few mods on will dependably cut firewood all day and do it fairly quickly. When I start on my wood pile I like to have 3-4 saws lined up when one runs out of gas grab another and keep bucking. At the end of the day sharpen blow them off and fill them up and do it all again the next day until I'm done. Cheaper saws to find being older and easy to get parts for. I picked my second one up for $125 and replaced muffler and chain brake with aftermarket parts and had less than $200 in it. Well worth the time and money.
Thx Bre...Great insights on these chain saw issues.
Man, I LOVE me some Stevie Nicks!
To sisually check for gas contamination , please use clean glass containers