Small Engine Repair Shop Diagnosing, Fixing and Fails! Stihl, Echo, Husqvarna Blowers

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 391

  • @jackleachman407
    @jackleachman407 Місяць тому +46

    It never get old for me watching you diagnose and fixing failing machines!! 😊

  • @leongrubbs8492
    @leongrubbs8492 Місяць тому +38

    Enjoy " hanging out" with you, Bre. At age 76 I am still learning how to work on my own equipment. Thank you.

  • @doughy041
    @doughy041 Місяць тому +53

    Random lawn and garden associate at one of the big box home improvement centers. You make my life talking to customers so much easier, especially with the two stroke engine folks.

    • @Chickanic
      @Chickanic  Місяць тому +12

      Thank you! Glad to help.

    • @Okinawa1914
      @Okinawa1914 Місяць тому +1

      ​@@Chickanic👋 Motul 710 2t oil ok for cheinsaw 4.5/1

    • @mitchcole900
      @mitchcole900 Місяць тому +6

      I’ve been hoping for your opinion on VP racing 50/1 fuel. I buy it in the 5 gallon cans. Lasts me all year. 4 chainsaws,3 weed walkers and a blower. I have used only Bo fuel in all of them. Never had problems/rotted fuel lines. I tell everyone that brings me their broken equipment to use it and watch bre’s videos.

    • @JohnSmith-pl2bk
      @JohnSmith-pl2bk Місяць тому +2

      @@Okinawa1914
      100% synthetic lubricant based on Ester-Technology. Specially designed for 2-stroke bike engines with premix or injector lube systems operating at high revs ...
      It's their own blurb so yes chainsaw engines apply....

    • @Okinawa1914
      @Okinawa1914 Місяць тому

      @JohnSmith-pl2bk 👍

  • @sailnut55mc43
    @sailnut55mc43 Місяць тому +8

    Who knew, use only fuel with FD rating, it's those little details that get you every time! Thanks for the tip!

    • @MelanieCotterell-h9d
      @MelanieCotterell-h9d Місяць тому

      It will run fine on pump gas just don't store them with it in the tank long term.

  • @mikeadam6776
    @mikeadam6776 Місяць тому +13

    Your the kinda mechanic that people come to and never question your recommendations. If they do they have no idea about what and how you work. Keep it up as there are very few people that you can rely on. Your at the top of the list.

  • @tradermonk9403
    @tradermonk9403 Місяць тому +15

    I learn as much from the fails as much as the fixes!

  • @kashmurray1199
    @kashmurray1199 Місяць тому +15

    Love learning more about small engine's from you. Thank you.

  • @mikecliff2367
    @mikecliff2367 Місяць тому +8

    You are a natural teacher. Appreciate your candor.

  • @brianrydzeski6108
    @brianrydzeski6108 Місяць тому +4

    Thank you, Bre. All these tips for free really helps me.

  • @janicebell3030
    @janicebell3030 Місяць тому +3

    I loved watching this! It's a great learning experience watching someone troubleshoot.

  • @donnyarmstrong9559
    @donnyarmstrong9559 Місяць тому +9

    Random Joe here... thank you for all you do and show us!
    Living my best La Vida Loca here in southeastern Arizona

  • @calescapee9642
    @calescapee9642 Місяць тому +6

    I just worked on those exact Models of Blowers and a Hedge trimmer recently for a Couple of
    local guys here. One guy had the
    idle needle all the way Closed and loose plugs on both machines. Had to Set the carb and explain about the crush washer on the plug. Easy fixes. Been doing this Stuff for 50 years. Great videos.

  • @waynestefinashen239
    @waynestefinashen239 Місяць тому +16

    Bre this is the Old Man at Eliminator Performance in Canada. Canadian Tire sells the VP Racing fuel and a while back when we started using Alkylate fuel for equipment storage we bought a can of VP to test. Now we know that fuel burns differently under compression but thought we would see how it burns in the atmosphere on a white saucer and to our surprise the VP burned with a lot more carbon residue than even regular pump fuel. At EP we originally started with Aspen which is likely the best on the market but now buy the Briggs and Stratton Kinetix Alkylate fuels. Testing of the Kinetix shows clean burning in atmospheric conditions and we have started equipment after 2.5 years of storage on the first pull with no issues. Our neighbour has been using the Kinetix for the last 6 years on his 2 stroke equipment and there have been no running or starting issues. Just wondering if the VP will create carbon build up issues over time? Maybe you could comment or do an atmospheric burn test for your viewers! Thanks love the channel you have done well.

  • @joeriver7994
    @joeriver7994 Місяць тому +11

    Always fun to watch you fix stuff.....what i hate is when someone else worked on something before they brought it to me to fix.

    • @JohnSmith-pl2bk
      @JohnSmith-pl2bk Місяць тому +1

      Always ask them EXACTLY what they did and what they fiddled with......?

    • @johnduffy6546
      @johnduffy6546 Місяць тому +1

      some mechanics don't know can't tell the difference between their sphincters and their spark plugs..Much less the proper torque to operate them

  • @thomashyler6174
    @thomashyler6174 Місяць тому +6

    I have been using a 80 volt Kobalt trimmer and a Kobalt 80 volt blower since about 2017. Both still going strong with original batteries. I live in New Orleans, so they both get used regularly for about 9 months of the year. I have gone through 3 heads on the trimmer. I also use a pole saw attachment with it, keeps the woods behind the house from encroaching.
    Still love watching you fix those engines.

  • @SteveMcQueen-bx4hu
    @SteveMcQueen-bx4hu Місяць тому +5

    Thank you, Chicki!
    Have a great weekend!

  • @Jim-Wade
    @Jim-Wade Місяць тому +8

    Living here in North Texas, I suspected the noise in that Husqvarna blower was a dirt dauber nest. I've had units completely jammed up with them. Have a great weekend!

    • @larryjohns8823
      @larryjohns8823 Місяць тому

      They built a nest in RV roof AC blower. When I turned on the unit, it vibrated so bad you could feel it inside the camper.

    • @richardsedenquist3222
      @richardsedenquist3222 Місяць тому

      Those mud dauber's cause a lot of problem's...they like to plug up crank case....transfer case....and Differential Vent's here in the upper peninsula of Michigan

  • @robertgrapes3070
    @robertgrapes3070 Місяць тому +19

    No word of a lie. I found the exact same issue with that exact model of Husqvarna blower just an hour ago before watching this. Great channel. Long time fan!

    • @JohnSmith-pl2bk
      @JohnSmith-pl2bk Місяць тому +1

      Did you throw out the fuel that the owner had in there (into a container to give to the owner) and replace it with "good" fuel for testing and tuning purposes?

  • @wesbishop3790
    @wesbishop3790 Місяць тому +2

    I really enjoy these! Thank you so much for making them!!

  • @dmcjr1375
    @dmcjr1375 Місяць тому +7

    VP is really good fuel and have had great luck with it!

    • @quartermoa
      @quartermoa Місяць тому +1

      I also have been using VP fuels in all my Stihl equipment. I am very happy and it runs clean. I won't use anything else now.

  • @mikahakkinen5651
    @mikahakkinen5651 29 днів тому

    in old days we did just use regular motor oil in 2 stroke engines.did work just fine ofcourse did smoke little bit more and before start engine it was must shake it so the oil did mix.todays oil its good with mixing in gas

  • @seanrich1367
    @seanrich1367 Місяць тому +5

    Your the best Chickanic. Thanks for sharing and saving us all Time/Money and Frustration.

  • @teddybeardiy3538
    @teddybeardiy3538 Місяць тому +2

    Although I am on the other side of the world from you with different weather, what I have found with any two-stroke engine is to let the machine cool off after use and then pour out the fuel plus pressing the primer bulb a few times to clear the line. This helps a lot with starting up again easily even after being stored for months.

    • @shannonwhitaker9630
      @shannonwhitaker9630 Місяць тому

      I go a step further for extended period storage. I pour in some straight 2-cycle oil in the fuel tank and purge “prime” the oil into the carb. Engage the choke and give engine a few good pulls. This effectively “pickles” a machine for long duration storage.

  • @LAP1050
    @LAP1050 Місяць тому +2

    This was a 👍 right from the beginning and it was for sure 👍 to the end.
    Thanks Chickanic 🇺🇸

  • @eldoradoboy
    @eldoradoboy Місяць тому +1

    my favorite kind of videos.. i love watching things get diagnosed and fixed!! while i dont diagnose and fix engines for a living.. I do diagnose and fix things (computer networks and VoIP systems) (old school busses for fun are the engines I diagnose). so seeing others with troubleshooting skills lights up my interest... love this!!

  • @patrickbonner4841
    @patrickbonner4841 Місяць тому +3

    Am addicted to all these repair channels

  • @kennyto226
    @kennyto226 Місяць тому

    My Husqvarna would only run a short while and stop. Went through all the usual things. Did the same. Ends up fuel cap has a brass filter. Drilled small hole next to it, runs perfect. Need a new gas cap

  • @robstone5333
    @robstone5333 Місяць тому +2

    I love TruFuel. Been using it to burn stumps. Works great.

    • @MelanieCotterell-h9d
      @MelanieCotterell-h9d Місяць тому

      I love free fuel, cheap fuel is good too. Neighbor gave me 5 gall of old pre-mix, it all went in my F150 before he has turned to walk away thinking "why didn't I think of that".

  • @truracer20
    @truracer20 Місяць тому

    Straight gas @1:14. It happens. I had Cub Cadet a string trimmer that I loved. It was cheap and fired up within 4 pulls year after year after year. I noticed that my sharpie '2 cycle only' was fading away on the gas can so I didn't think anything of it when I noticed it was gone entirely because we only had one 1 gallon gas can. well I filled up the trimmer and it was running a little bad, figured it needed some work, ran that tank out and filled it up again, this time it ran horrendously, so I ordered a new carb. In the meantime I discovered my 2 cycle only gas can conveniently hidden in the shed. it turns out my wifes friend gave her an identical can and my can just got stuck under stuff in the shed.

  • @mikeskidmore6754
    @mikeskidmore6754 Місяць тому +1

    I have 25 Year old Husky saws that have never had the Carburetor apart. I have always used E-10 since it has been the main fuel source in Michigan .. I use 93 Octane E-10 ...Finally used up all of my Little Bottles of Sthil and Husky synthetic 2 stoke oil . Now I fill the little bottles from a 1 gallon container of Klotz Synthetic two stroke oil.
    My secrets are 1 I leave the gas tanks nearly empty so I can fill it up with fresh gas before I start it. My main secret is they are stored in the oil room of my insulated shop. That room never gets below freezing or above 90-F . I have a couple of saws that were owned by others that I need to try and get running. One very low hour saw will start and run for a few seconds. My Father is meticulous about keeping his fuel clean.. so I know the filter is not clogged. The rest I will have to figure out as I go as I have never worked on saws other than changing points and a throttle linkage ect on my Grandfathers Mac-10 when I have a firewood business as a teenager. That saw still runs too .

  • @rickbush3320
    @rickbush3320 Місяць тому +1

    Well I just changed out my crispy diaphragm on my bogging husky and now runs like a charm! Thanks, it saved time, money and frustration…go figure ❤

  • @georgew.5639
    @georgew.5639 Місяць тому +3

    Trufuel vs VP! No contest!!! We use the VP brand at the truck body shop. No problems. At my golf course job we mix echo oil with our own gasoline. No problems there either. 😊

  • @dab1068
    @dab1068 Місяць тому +1

    Nice smorgasbord of stuff to work on. Fun video. Thanks for sharing.

  • @truracer20
    @truracer20 Місяць тому

    I've used VP 40:1 in my toro trimmer. runs fine but pricey. It's easier to get a gallon or 2 of non ethanol and mix some up. Usually 1 or 2 gallon lasts the whole season for me, depending on how much brush cutting I do.

  • @ILOVEMACHINES225
    @ILOVEMACHINES225 Місяць тому +1

    ty so much chickanic on my bg 55 i was adjusting the carb and everything and nothing worked but i watched your video and now i know i wont have adjust anything just change the fuel and ive seen that vp stuff at tractor supply thank u alot

  • @throttlebottle5906
    @throttlebottle5906 Місяць тому

    the blower around 9:03 and earlier, dirty/over oiled air filter. leaky carb, does it every time and the lean tuned junk runs about right that way on ethanol laden fuel.
    they know nobody maintains the junk and set it tp to run decent that way. that is until it gets low percentage alcohol water from sitting, or the in tank fuel lines turn to shreds. ethanol and other detergent additives(oxidizers). same for engine oils, yep, it all stays cleaner, but the wear is there.

  • @michaelrockwell9691
    @michaelrockwell9691 Місяць тому +1

    Glad to hear about the VP fuel. I have customers that ask me in my small engine shop and I never had a good response til now!

  • @patrickbink4617
    @patrickbink4617 Місяць тому

    Even though I rarely have the opportunity or need to fix small engines I find your channel to be one of my favorite go-to channels. Always learning something seeing what you do.
    I will say I was confused when you said the customer probably used HEAT. I was thinking thermal heat for a while and couldn't understand how they used that. Then I remembered seeing a can of HEAT someplace. Then it clicked and made sense.

  • @wyliecoyote1
    @wyliecoyote1 Місяць тому

    Very good mechanic, minimal time spent to diagnose and repair. Also, I was thinking bad gas effect on carb, old gas a few years. Tried new gas before drop off to shop.

  • @steveprice5664
    @steveprice5664 Місяць тому

    I don't have a Stihl blower, but my other Stihl tools take a 40:1 fuel mixture. I noticed that the VP fuel was 50:1.

  • @SCOTTYD2031
    @SCOTTYD2031 Місяць тому

    That fan problem is the exact same thing that happened to my Maytag gas clothes dryer.

  • @ryanvalleyirrigation
    @ryanvalleyirrigation Місяць тому

    I bought trufuel when I bought my chain saw and bought truefuel for my chain saw also I use in My leaf blower it starts much easier when use it I don't have a problem with it at all

  • @michaelwoods6771
    @michaelwoods6771 Місяць тому +1

    I started using the VP fuel after you hammered on Tru fuel. But now my 5 year old cub cadet weedeater won't rev. But the weedeating time is over so will tackle that in February ish... thanks for the videos

  • @_Archie98
    @_Archie98 Місяць тому

    Just repairing a BG85 throttle cable somehow became kinked so needs replacing and won't turn off but a load of carb cleaner on the switch sorted it out 👍👍

  • @davidanderson2598
    @davidanderson2598 Місяць тому

    I have an old Stihl SH85 leaf blower in the UK, you saved me loads of time money and frustration when i realised I had a clogged spark arrestor. Having removed the spark arrestor I burned off the carbon and now it runs on full throttle.

  • @johnduffy6546
    @johnduffy6546 Місяць тому

    I love your problem solving skills. "Experience is the best teacher." It is obvious that you have great experience! Your facial expressions crack me up. You are so genuine...Keep up the great work!

  • @michaelsnell4034
    @michaelsnell4034 Місяць тому

    When I bought my newest Troybilt trimmer, the original oil they provided made pink fuel too.

  • @pain_inthe_bass
    @pain_inthe_bass Місяць тому +1

    I love the VP 2-cycle oil ... Amazon it's very pricey but at the tractor supply you can get it for cheep

  • @lloydames8752
    @lloydames8752 Місяць тому

    I have been using vp racing fuel for years. Look at the can it is also 94 octane. I tell everyone mix your own gas all summer and switch to vp mix for last two tanks and put it away full for the winter it will start up two pulls in spring and run perfect. Piston stays perfectly clean.

  • @Bill-A-DFW
    @Bill-A-DFW Місяць тому +1

    You're advice /experience is just 'AWESOME' Thank You!!!

  • @adamtorgrimson2151
    @adamtorgrimson2151 Місяць тому

    Been running vp for a few yrs now and it's top notch. Also run their oil as well as echo red armor. And it's right there with red armor

  • @no-hndle
    @no-hndle Місяць тому

    love your content, both amusing & helpful !
    Our 42" riding mower just set an idler pulley on 'fire' & shot it out from under ...

  • @Wishbone799
    @Wishbone799 Місяць тому

    Just an observation I made over the years the coarse screws are for bolting into plastic, if you come out with fine thread ones they generally thread into the metal casing. Sometimes theres plastic moulding on top to confuse everybody.

  • @edclaytor1873
    @edclaytor1873 Місяць тому

    Thanks for the VP Racing Fuels Premixed recommendation. While I have no real problem with true fuel, I have noticed the power up and down drop in my weed eater so I'll give it a try plus it is a bit cheaper thru amazon, no local stores carry it "yet". But with plus free shipping so still less expensive than true fuel at ye old local box store.

  • @davidhuffine5084
    @davidhuffine5084 Місяць тому

    Good fix on the husky blower . Did not knoe Heet would ruin gaskets . Thanks for the info , Bri SEEYA

  • @stellarproductions8888
    @stellarproductions8888 Місяць тому

    Hello Bri! I just want to say that I can confirm your findings. I was running some year old but stabilized pre-mixed 50:1 in my Husqvarna 570-BTS blower, and I started noticing that the RPM's were not getting all the way to full anymore. I started buying the 40:1 VP fuel, because I felt it better to have a tiny bit more oil in the fuel, as a safety precaution in my expensive commercial backpack blower. Suddenly the RPM's went to full again, and I have had 0-problems with VP racing fuel!

  • @thepaterfamilias5853
    @thepaterfamilias5853 Місяць тому +1

    I LOVE watching you operate !!!

  • @johnfarrell3171
    @johnfarrell3171 Місяць тому

    Greetings to all. Happy to find you just yesterday while tracking down reliable intel on an Intek. Enjoying this vid although my three rarely used blowers are electric LOL. After watching the Intek vid however, I'll probable keep and refurb it myself after I swap it for a Kohler that's already done. Too many projects going and running short of forgiving weather here 😄. . .

  • @cynthiasomervill1812
    @cynthiasomervill1812 Місяць тому

    Thanks Bre. I always enjoy watching your videos, and have learned TONS from you.

  • @billh-gl2lf
    @billh-gl2lf Місяць тому

    Another excellent video,Brie…this topic about premixed fuels has been on my mind for a while. I confess that I have actually bought some of the Trufuel,for use in my Husqvarna 128LD weedeater.I’ve had it for close to 10 years and it hasn’t run right in a long while. I don’t use it very much and I actually use a Ryobi cordless trimmer for most of my work and it’s actually been pretty good.Anyway based on this video I’m going to give the VP fuel a try and see how it performs..thanks again for all you do,Bill H(64 y/o semi retired amateur shade tree mechanic)

  • @peskypeet
    @peskypeet Місяць тому

    Nice, sounds like the VP smoothed it out and picked the rpm a bit too. I've been using Amsoil Saber, seems to work really nice & the exhaust doesn't stink.

  • @paulshaw5345
    @paulshaw5345 Місяць тому

    Thanks

  • @opendstudio7141
    @opendstudio7141 Місяць тому

    Having found two heat related problems on one unit may point to a design oversight. Heavy usage over an extended period?
    Inadequate lubrication in the fuel mix?

  • @WayneSewell
    @WayneSewell Місяць тому +1

    I have used the fuel for many years in all my Husqvarna engines without any issues

  • @jstpsgthru
    @jstpsgthru Місяць тому

    Chicanic, you are the only one that can help. I have a HUGE problem with canned fuel not being sealed. I have gotten both TruFuel and Echo RedArmor fuel. Neither shows a manufacture date. Neither has a method of detecting whether it has been opened. I called Echo and the representative almost laughed at me for suggesting a seal. They should at least make the cap with a tear-away strip (like milk,) if consumers are going to rely on 5 yr storage. It is too easy for people to open the can, not to mention contaminate the fuel.
    Please, Chicanic, straighten Echo out. Thanks

    • @waynestefinashen239
      @waynestefinashen239 Місяць тому +1

      Excellent point you have made makes you wonder eh? The Kinetix Alkylate fuel we purchase at Eliminator Performance in Canada has the seal you speak of and each can has the manufacturing date on it. Interesting when we contacted B&S about them selling us 2021 manufactured fuel in 2024 they commented that if we do not open it the fuel will be perfect even beyond the 5 years they suggest basically saying it will stay good forever? We have cans stored to test this out in 6 years and beyond hope they are right.

  • @lonhoschar1943
    @lonhoschar1943 Місяць тому

    Really like the in-depth diagnostics you provide. It has helped me in the past to get my chain saws and weed wacker all running like they are supposed to. I still have a Craftsman weed eater with the quick attachment set up that I can't seem to find the correct carb kit for. Mine has a fuel pump gasket with two tiny holes at the center and the kits I find all have one larger hole in the center. Those don't seem to work??? The kits say they fit my carb but apparently that's not the case. I finally gave up, for now, and bought a new Craftsman, the same style, so my pole saw attachment will work on the new power unit.

  • @danrutz3176
    @danrutz3176 Місяць тому +1

    I love your channel, and I am kind of a "do it yourself" guy. I so respect you. I tried a gas and oil treatment called sea foam. It seemed to improve performance. I would appreciate your opinion on that. I also use stabil. I would like your thoughts.

    • @danrutz3176
      @danrutz3176 Місяць тому

      I also change plug new oil every spring and air filter.

  • @josephpuchel6497
    @josephpuchel6497 Місяць тому

    Hey I have been using OPTI-2 two cycle mix for years. I have used VP fuel. Dislike true fuel. I can use one of those scopes. Excellent tutorial

  • @rquest3059
    @rquest3059 Місяць тому +4

    I always enjoy your diagnosis of issues, saying never use certain products. Then my brain says.... oh, that's why.

  • @KPrimeau1
    @KPrimeau1 Місяць тому +1

    Glad to see you back. Thank you.

  • @treeguyable
    @treeguyable Місяць тому

    Got the exact same blower, a truckload of chainsaws , and 2 pole saws. All are run on ethanol fuel, and walmart marine 2 stroke oil. Never had a problem..Engines are peculiar.

  • @bellssuperclean
    @bellssuperclean Місяць тому

    love your channel just found it this week and going threw all your videos awesome work

  • @rednissan96
    @rednissan96 Місяць тому

    That's so weird that you worked on the 125B . I have one and just replaced the fuel lines last week but I think the lines I used are a bit too thin because it starves for fuel unless I bring it back to half choke. Now I'm saving your video of that repair. I should have done a search for it on your channel .

  • @Wags44
    @Wags44 Місяць тому

    I swear by VP fuel! I've used their 40:1 50:1 mix for years and have never had any issues! Great stuff.

  • @johnhicks735
    @johnhicks735 Місяць тому

    I'm sorry to tell you something on that on it sounds like it's actually one of two things out air fuel mixture screw adjustment.,or the high and low set screws aren't set to specs. One more extra thing it could be is the mini lead filled carburetor block body screen clogged up with debris.,or dirt.,or even Ethanol residue buildup from the fuel drying out from hydroscopic moisture issues. over the period time of usage of it's entire life's span expectancy. Another thing could be from leaving ethanal fuel mixed with two stroke motor oil in those over months of sitting around with fuel inside of them not being used at all to.

  • @LtKernelPanic
    @LtKernelPanic Місяць тому

    I'll have to look into that VP fuel. Maybe because unlike your pro customers my Craftsman blower only gets used for a few minutes each week but I've never had an issue with TruFuel's 40:1 mix. It runs smooth both at idle and full speed. It's overpriced as hell (like all premixed fuel) but i like the fact that it has a long shelf life unlike home mixed stuff. Yeah I could add my own stabilizer but the bottle would probably go bad before I'd use a quarter if it.

  • @garypritchard9787
    @garypritchard9787 Місяць тому

    Used Red Armour, but my local HD quit selling it, but Tractor Supply sells VP and my units seem to run better on it and it is much cheaper. I have a Bg55 & it is very temperamental.

  • @robertmailhos8159
    @robertmailhos8159 Місяць тому +2

    Fun times with Bre to fix up all of those small engine stuff 😂

  • @ccroson7935
    @ccroson7935 Місяць тому

    This is what I’ve been preaching to you guys VP fuel is probably one of the best fuels I’ve ever used plus VP 110 racing fuel three year shelflife mix it with Torco GP7 two cycle mix put it in all my string, trimmers backpack blowers anything with a small engine even by John Deere 300 garden tractor never ever have start problems

    • @ccroson7935
      @ccroson7935 Місяць тому

      @ how do I do that? I have no clue how to reply privately on anything or reply to a nice message. I’d like to talk to people and explain my ex experiences. I’m not sure how to do it.

  • @barrygrant2907
    @barrygrant2907 Місяць тому +1

    I use non-ethanol fuel for my Murray lawn tractor, my backup generator, and all small engines. Because I store fuel for hurricane season, I add the recommended amount of Stabil and add a bit of Marvel Mystery oil. The fuel is dumped into my vehicles after hurricane season. I've never had any fuel-related issues with either machine, both being from 2004-05 timeframe. The generator has only been used a few times for short periods but is test run each spring and then run dry. Any recommendation pro/con with my fuel storage as to engine effect?

    • @haljordan9160
      @haljordan9160 Місяць тому

      I run non-ethanol, stabil, & Marvel also! My 2-stroke mix I use Marvel/stabil/ & red armor echo oil. All my equipment is 15+ yrs old, some are well over 20.
      I flood my carbs w/ Marvel if I'm putting the machine away for several months (like my pressure washer or some of my saws). I run my generator under a load at least once a month.
      I keep 50 gallons on hand starting around July, then use it up in our trucks around December. Hurricane Milton put another 230 hrs on my 23 yr old generator.

  • @staceygandy2009
    @staceygandy2009 Місяць тому

    You know it! Good fuel and oil mix makes a difference. Especially two cycle.

  • @joeedwards922
    @joeedwards922 Місяць тому

    Hi Bre - love your videos and all the bits of information you share makes working on my equipment much easier.
    I do have a problem and come up with dead-ends over and over.
    I would like to send you a pic of my John Deere Sabre ID tag to see if you can get me links to owner and service documentation (free downloads of course 🙂).
    Also the trans tag is gone and I cant identify the trans.
    I sure would appreciate any help you may give?

  • @Davidjb37721
    @Davidjb37721 Місяць тому +1

    Thanks for your input

  • @richardwernst
    @richardwernst Місяць тому

    Always amazed the designing engineers spec different sized screws when at least in this case it sure seems like there is no need to.

  • @richardcranium5839
    @richardcranium5839 Місяць тому

    glad to see you are back. that 125b is a great blower with one design flaw. the inlet is too flat and if you are a leftie its easy for it to be plugged off up against your leg. (notice the stihl is wider with slats in the sides?) that will destroy the fan and also cause it to over rev. actually thats how i set the top end. up against your leg it should 4 stroke. i knew as soon as you pulled it over the first time the fan was gone!!! when they run good they are great. can be real cantankorous when not.

  • @BearE9090
    @BearE9090 Місяць тому +1

    Nice find about the fan, Great video.

  • @gamingwithfrodo
    @gamingwithfrodo Місяць тому +1

    You are the best, Chickanic.

  • @MorganOtt-ne1qj
    @MorganOtt-ne1qj Місяць тому

    I use E free fuel and Stihl Silver mixing oil. After my 029 got unreliable, I bought a MS361, and have a KM134. Both are 2 pull starts now since I started with the E Free 89 octane. I'm wondering if the 029 isn't worth putting a new carb in? I would take it to you, but am in VA.😯🙄 Great video!

  • @1RCPILOT
    @1RCPILOT Місяць тому

    VP Fuel for the win!!!! 👍 You just validated what I was hoping for. How good VP fuel really is. I use VP in all my 2 cycle engines. Never had a problem!!! 😎

  • @LoganHester-1489
    @LoganHester-1489 Місяць тому

    Ive got. A saw its been sitting for a year with red amor fuel it still runs fine

  • @stephenreiner1523
    @stephenreiner1523 Місяць тому

    Hi Brea, glad you're back and why would you use canned fuel when you can mix it your self and never have a problem. It's surging because of bad fuel, it canned fuel. I stay away from that stuff and use 93 octane and for 25 years have never had a problem. Backpack blowers are something I stay away from.

    • @Chickanic
      @Chickanic  Місяць тому +1

      I have some viewers who love the stuff. They might only use a pint of fuel a year. Makes sense for them to use canned.

  • @fartsackjack7081
    @fartsackjack7081 Місяць тому +1

    WOW LOOK AT THOSE BIG BEAUTIFUL PLANTS ....I LOVE PLANTS

  • @richardwernst
    @richardwernst Місяць тому

    Wow, interesting on that first blower with other fuel/oil mix. Even in the video, it sounded like it was running better/faster once the old fuel was gone, than even at best with the old fuel.

  • @MelanieCotterell-h9d
    @MelanieCotterell-h9d Місяць тому

    Is the spark arrestor clogged? I'd check that 1st because people usually use too much two stroke oil, or none.

  • @caseychadwick595
    @caseychadwick595 Місяць тому

    Question. Could the carb inside have gotten that way sitting in a hot shed over the summer? I know some plastic sheds and metal sheds for a sure will get 20 to 30 degrees hotter on the inside of they are directly exposed to the sun. That could cook a lot of things.

  • @philliphall5198
    @philliphall5198 Місяць тому

    VP has been great in my opinion and red armor is mainly what we use in shop 😊

  • @bmartin1785
    @bmartin1785 Місяць тому

    Hoooskvarna 😂 Great content Chick! I’ve dabbled in small engine repair/maintenance the last several years and have learned alot from your channel along the way. Thank you!

  • @garyhockensmith2471
    @garyhockensmith2471 Місяць тому

    I noticed you use a compression tester like mine, you always can get over 100 psi, whatever unit I test can only get 50 psi, I am wondering if your lower hose that screws into your spark plug hole has a Schrader valve in it at the bottom mine has it in the top of hose!

  • @NightStalkers-hx3dq
    @NightStalkers-hx3dq Місяць тому

    My KTM300 loves the pre-mix from the Husqvarna store, all but the insane price...

  • @Joseph_fab_shop
    @Joseph_fab_shop Місяць тому

    I used the same vp racing gas and it works great