On your newest video. We need more of that lbt carrier.. no videos on the krydex lbt but yours. If its not a bother can you measure the width of the front, right above the kangaroo pouch. And measure the back width from center.. im just hoping this fits my 10x12 plates.
Hey man I love this video. You got straight to the point no bs! quick question do you have to buy a gun thats already hpa tapped or can it be a gbb or a aeg thanks for the info!
Both carbon fiber wrapped (still metal underneath) and steel tanks have re hydro dates. Typically time frame is about 5 years, and you can have scuba shops re hydro and certify them if needed. It’s a date stamps in the side of the tank or printed on it
@@FoxOneReviews in this case it was an SLP regulator on the tank itself then a redline regulator at between 80-120 psi depending on chrono connected to the line that goes to the gun . I hope that’s what you were asking lol
So HPA always you to use a heavier bb? don't think I heard that before. With my AEG I would run .25. Is that a bb weight I can use for HPA as well or would I have to use something heavier?
Krytac is but you won’t have the mock bolt, also a vfc upper (in most cases) will for a krytac lower , find and messaged on IG and I’ll get you pics and info. Sorry for delay in response!
It varies based on cheono limits but most engines are rated down 80-120 psi, sometimes you can go lower depending on setup efficiency. Most builds you end up around 80-90 psi for 1.5j with a .32g bb
Max fps will depend on inner barrel length and inner diameter longer inner, higher fps. Tighter Inner diameter , higher fps. So with a 300mm I’d run at abour 90 psi and get 1.6j with a .36, if you want sniper cheono, a 455m at a similar psi will get you above 2j with a .45g bb
Informative and to the point. The community needs this. Nice job!
Thanks dude appreciate it!
On your newest video. We need more of that lbt carrier.. no videos on the krydex lbt but yours. If its not a bother can you measure the width of the front, right above the kangaroo pouch. And measure the back width from center.. im just hoping this fits my 10x12 plates.
Sorry I just saw this, yes it fits 10x12 plates quire well!
@victorranderson no worries. But any upgrades add ons, I'm sure we'd love to see a video up close.
Hey man I love this video. You got straight to the point no bs! quick question do you have to buy a gun thats already hpa tapped or can it be a gbb or a aeg thanks for the info!
Do carbon fiber tanks have an expiration date? Is there a hydrostatic test recommendation for old tanks?
Both carbon fiber wrapped (still metal underneath) and steel tanks have re hydro dates. Typically time frame is about 5 years, and you can have scuba shops re hydro and certify them if needed. It’s a date stamps in the side of the tank or printed on it
What kind of regulator connected to the tank? I mean the psi ? And how much psi on the other regulator connected to yhe hose?
@@FoxOneReviews in this case it was an SLP regulator on the tank itself then a redline regulator at between 80-120 psi depending on chrono connected to the line that goes to the gun . I hope that’s what you were asking lol
So HPA always you to use a heavier bb? don't think I heard that before. With my AEG I would run .25. Is that a bb weight I can use for HPA as well or would I have to use something heavier?
You can run a lighter bb, just hpa allows
You to run a heavier bb and really reap the benefited of having to carry a tank over aeg
Was up brother how are you, I was wondering anyway you can make a video to see what uppers are compatible with vfc I heard krytac is thanks!
Krytac is but you won’t have the mock bolt, also a vfc upper (in most cases) will for a krytac lower , find and messaged on IG and I’ll get you pics and info. Sorry for delay in response!
@@victorranderson all good brother thank you!
What PSI do you have the regulator set to ?
It varies based on cheono limits but most engines are rated down 80-120 psi, sometimes you can go lower depending on setup efficiency. Most builds you end up around 80-90 psi for 1.5j with a .32g bb
Have a website to get the regulator?
Sorry slacking amped airsoft is the go to!
What is max fps ypu got ?
Max fps will depend on inner barrel length and inner diameter longer inner, higher fps. Tighter Inner diameter , higher fps. So with a 300mm I’d run at abour 90 psi and get 1.6j with a .36, if you want sniper cheono, a 455m at a similar psi will get you above 2j with a .45g bb