Ultimate (#3) version of the power angled ATV snow plow, IT WORKS!!!
Вставка
- Опубліковано 29 сер 2024
- Finally I have a working version of the electric angled ATV snow plow! Forget about the other versions and use this as a template if you are building your own for next winter.
Awesome, looks like a win.
Thank you!
I installed the plow today again. And it works!
You got it to work really good.
And I really wish I could have a system like this, maybe I need to do a Macgyver for next season 😆
Yes, finally it works! If I knew how much work it would take, I might have skipped it or got a “factory” solution.
Works pretty good. Beats a shovel. Only one thing left to do......come clear my driveway.
12-2022 Michigan USA
Thanks! The trip to you is a bit far (and wet!) but I have cleared my neighbors driveway a couple of times. If I was closer I would help for sure! Best regards Nils in Sweden.
Hey Nils it works awesome good idea using shrink tubing on the ends of the cables . so I just got the notification of your video this afternoon . Thanks for sharing my video I just took off my plow so probably will snow again soon here .
I took it off too, won’t plow any more this season but I have one or two videos left to publish. Plow is still holding up so I think it is working.
Seems to be working really well, I need a atv plow like that but for dirt not snow, keep up the good work 🙂
Thanks! If you make one for dirt, you should get one that connects in the rear, much stronger!
1:45 You are truly getting old... when "friction" from Biltma give you so much satisfaction
You have to enjoy the small things in life but yes, I am getting old…😃
Great update lol, seems to work out in the end. Keep em coming.
Thanks, yes this time it actually seems to work!
Nice video again. You are very diligent
Thank you! I never know when to give up!😃
It may cause less stress if your winch cables run straight out/forward to the back of the plow where the cables 90 degree turn out to the edge’s through a small pulley (one for each cable). At the outer ends of plow, they run 45 degrees back towards the centerline of the ATV again to anchor. Cables form two right triangles back to back through 2 pulleys each.
Yes that might be better, will consider it if this version breaks. Thanks for the input!
Snyggt Nils, bra jobbat :D
Tack så mycket!
Nice work. Did the thinner wire work fine on the winch drum without using tension?
Thanks! Yes it worked so if you find a thin but strong wire it could be a better way to do it.
Hey Nils , is the cable on the your left on the blade , is it a short cable that is tied off on both ends ? Does it just get its tension from the spring being stretched out ?
Hi, might not understand the question but the cable is shortened and both ends are just tied of. It attaches to both sides of the plow and the short springs are there for tension because it just slipped on the drum without them. I think it is easier to se in the first video I made about this snowplow?
Building a power angled ATV snow plow
ua-cam.com/video/4MEGg41qSys/v-deo.html
Thanks Nils . I watched the 1st video & now I see you loosened the cable . Rewound it around the spool & reversed how it came out of the spool ? Is that correct ?
@@danbradley8052 yes! It pulls one end and slackens the other. But the thin cable wasn’t strong enough to hold for sudden jerks. The version in this video seems to work well. Except that the electric motor of the winch rusted due to water inside it…
Hade du ställt vinschen rätt upp å ner hade du sluppit alla linblock och vinklar i wiren,har klurat på samma ide själv men fick tag på en belos transpro 1500 med hydrauliskt klaffblad,fjädrarna är nog väldigt viktiga,dom räddar nog mycket vid ett hugg i bladet
Ja det stämmer men då hade inte vinchen fått plats när man höjer plogen. Om man har en undermonterad plog eller längre avstånd mellan plog och maskin så skulle det vara en bra ide. Belos är fina grejer! Mycket kraftigare än alla ATV prylar!
Problemet med plogning med fyrhjuling utan bandsats är ju att det är svårare att göra nå vettiga snöhögar så platsen för snön räcker hela vintern. Jag brukar få ta slungan å köra bort det ibland så jag kan ploga dit nytt.
Ja det är lite begränsat. Men skulle det behövas så har jag plogbladet till minigrävaren.
@@NilsKall jo så är det ju. Min arbetsgivare brukar komma förbi med L70:in när det blir riktigt mycket. Som mest tror jag vi fick runt 30-35cm på en gång nu i vinter å plogkarmen blev ju det dubbla ungefär. Då fick quadrunnern jobba lite 🤣👍
@@Koivumaa94 oj! Det var lite mer än här! Men gick det bra med Suzukin? Upplevde den som väldigt stark och stabil.
@@NilsKall jo det gick hyfsat. Den är ju så lätt så det är inte det bästa fästet utan kedjor. Men den orkade ju snön utan problem.
2:05 Thats what she said ;D
I never heard her say that so I don’t know what you talk about. 😜
When does snow stop ? May ?
Stop snowing? Actually we had the first really warm day today, spring is just around the corner. I won’t plow any more snow this season but I still have some older
videos to edit and publish.