Wood Scissor Lifting Table
Вставка
- Опубліковано 28 сер 2024
- Scissor Lifting Table Mechanism, just by rotating the screw you can lift the mechanism.
All details about mechanism from here 👇👇
erobtic.wixsit...
Support and Download 3D Model
www.cgtrader.c...
Follow me at
/ erobtic
nice work mohamed, this is a great design
Something so simple, shown in a simple way. Thank you.
A very effective idea, explained in a simple way. Definitely a keeper.
👍👍👍
Super idea. You just saved us $200 for a hydraulic lift table. Going to put a torsion box on top and add caster to make it mobile.
Well job..and nice have some technical importance thank u please make video on scissor lift by box tube lift by 2 hydraulick cylinder ground level to highly aprox 4500 mm
ڤديو رائع يستحق المشاهدة للأخر واحلى لايك
Thanks. I love it.
Thank You. 👍
Thanks, Mohamed your video gives me a great jumping off point for my project
+Phillip A. Rudolph dito!
يعنى انا اخش ادور على طريقه عمل الميكانزم الاقى انت اللى حاطه؟ :D...عاش يا عم سامى :D
It"s cool Men ! Thanks a lot ! 🎊✨🎈🎐🎞🖼🧵
El elemento que une los ejes transversales en la parte inferior. va atender a flexion con el desplazamiento que empuja el usillo. Eso genera mayor desgaste y se puede atorar. Seria mejor que los pies de la tijera se desplacen con rodamientos sobre una canaleta.
Super idea and very well presented. Many thanks.
Nice design.i love this!
Fantastic! thanks for making this video! Keep up the fantastic work!
Well, Mohamed, I've actually built one table of similar design for myself. It has a great problem - it is not firm. It yields like a spring if you press left or right side of table. Because it's left and right scissors are not connected firmly with each other.
To get rid of this bouncing one should replace two bottom tube rails with a screws and apply rotation to both of them.
Now I'm planning to build another table.
Pavel Chernov Try to connect each joint in right side to the similar joint in left side of mechanism, the mechanism will be more rigid.
....l.
Salmone affumicato
hey pavel . would you share the blueprint with me please i want to build one for university project i would really appriciate it
Very nice animation. Thank you for sharing.
The video idea requires a left hand threaded bolt and nut. Of course it will work with right hand threads if the model is made to turn it the other way.
the direction of rotating motion for the steer shouldn't have been go further right, it should have been go the opposite direction. am I right?
impressive, and very useful. Thanks for sharing
nice lifting table, thanks for sharing
فكره جميله شكرا اخ محمد
Gracias.muy buena.
I just don't understand if the table has to be levitating in real life or how do you roll the lever without hitting the floor. Thanks! Nice animation!
Hi jack, with my pleasure to give me feedback 😊
it is just a concept you can install DC motor instead off the handel, OR adapt the mechanism as per your specific application.
Stupendo lavoro, si possono avere i disegni per realizzarlo in formato pdf, dwg, dxf o cdr. Grazie
Ошибочка в ЗД анимации, найти шнек с левой резьбой проблема, да еще и с гайками. ))
cool fangin
Making a similar idea to this for a project and was wondering what the name of the items allowing the object to slide along the rod are called.Any help appreciated
Thanks for sharing. Jazakallah
الله ينور
excellent
Hi Mohamed, What would be the maximum lift capacity?
Can I have a detail drawing with measurement
you can download from this link
grabcad.com/library/scissor-lifting-table-1
Crank handle appears to be digging trough to make loop if unit is sitting on the ground.
yes offcourse, you cannot put it on the ground unless you can use a motor to drive mechanism.
Hi, I was wondering if it would be at all possible to get the solidworks files for the single stage scissor lift assembly (+ all the parts) ? I really need a well constructed model (no underdefined sketches and the right assembly mates) of a scissor lift to analyse for my engineering class. Kind regards, Pauline Verbeke - University of Antwerp
Pauline Verbeke you can get the files from here "grabcad.com/library/scissor-lifting-table-1"
Super thanks!
+Mohamed Sami Most of the pieces are in the folder, however the main structural pieces that make up the frame such as the lower plate are missing. Do you have any of Solidworks drawings for the rest of those pieces? Thanks!
What name aplication?
Do you have planes
اسمه ايه البرنامج ده لو تكرمت
SolidWorks
Could you kindly do a tutorial on modeling and animating this in fusion 360?
Hi car, i am so sorry for late in replay; this is in SolidWorks you can get the tutorial and download the project from here "grabcad.com/library/scissor-lifting-table-1"
Good Luck :)
Mohamed Sami do you have the dimensions for all the parts?
yes, you can find the CAD model in this link "grabcad.com/library/scissor-lifting-table-1"
Yah chij banvana hai hamare koo
Elevador
Ramdas
That did not tell us how to!
It's not safe
worms for days man tellin ya now
ये गलत है अगर ये फरवरी पर होगा तो हैडल पूरा नहीं घुमेगा
Hi, if I understand correctly, the screw makes a mechanical lock of the system.
So, only you can control the mechanism through handle 😊
Thanks chief for following my videos 😊
Buy a motorcyle lift for $80