Great video! At about the 10 min mark you can watch the material lifting and dropping back to the work surface. I'm sure this is also effecting the focus. Again great video ! im trying to learn as much as i can before purchasing my first laser.
Great job, thank you again Roger for this video which will help a lot of people to choose the right laser engraving. Especially stainless steel to obtain many colors depending on laser power and speed of engraving. The wavelength of the laser used may be also a parameter to be considered in this experimental setup.
You're right.....very interesting!!! I would understand the frequency changing the color, but I was surprised to find out it was the focal length. Thanks for taking the time to make these videos. At first glance I thought, wow....that's a lot of money to just etch a logo.....but the pictures and the color are adding a lot more uses/options. -Mike
Can I use the test cards that I purchased for Xtool P2 on my 30 watt ComMaker Fibre Laser? If so, which ones? If not, do you have a set for Galvo Machine? Thank You. Jim Curnow
Hi there I want to learn how to colour engrave, do you have any resources that could help me or any video tutorials please could you attach a link . Thank you
Thank you for the video lesson.. I have a 30Q Raycus laser (30w), F-290(200X200) . Will I also be able to do color engraving with my laser? If you have the exact parameters, how to set the settings in the EZCAD 2 program
I'm trying to make a test grid like this and every time i change the settings on one pen in ezcad it changes the rest of the pen settings. Any tips on how to change settings on only the pen selected? Thanks in advance!
Hi Roger, fantastic video, many thanks. Would love to hear your comparison technically of this Laser versus a Rycus Mopa on your next colour trial. Kind regards Gavin
@@rogerwebb9600 Thank you. Have you any practice or solution to easy change the different variables on test patterns? For example, I mean a table in EzCad? 🤔
@@rogerwebb9600 thats pretty nifty, im using a 50 watt fibre with the EZCad software in my place of work, we also have a 50 watt CO2 aswell, wouldnt mind setting up a business of my own
Do you have any experience engraving sterling silver? I've watched a few tutorials and read some posts but I can't for the life of me get it to work. I've got a 30W Raycus with a 270mm lens - I'm thinking the lens might be the issue but I can't say for sure
I think that you are getting anodizing confused with annealing. Annealing is heating ‘stressed’ metals, so that the metallic grains are relieved of their stress and are less likely to crack under further stress. Anodizing is applying an oxide coating to a metal to change its color and offer a degree of resistance to corrosion. You are NOT annealing your stainless steel sheet, you are anodizing it. Keep up the great work. I am enjoying your liber laser series.
Great video! At about the 10 min mark you can watch the material lifting and dropping back to the work surface. I'm sure this is also effecting the focus. Again great video ! im trying to learn as much as i can before purchasing my first laser.
Great job, thank you again Roger for this video which will help a lot of people to choose the right laser engraving. Especially stainless steel to obtain many colors depending on laser power and speed of engraving. The wavelength of the laser used may be also a parameter to be considered in this experimental setup.
You're right.....very interesting!!! I would understand the frequency changing the color, but I was surprised to find out it was the focal length. Thanks for taking the time to make these videos. At first glance I thought, wow....that's a lot of money to just etch a logo.....but the pictures and the color are adding a lot more uses/options. -Mike
Yes very useful
Very necessary tables!!! How can I download these tables? Thanks for the video!
every work on polycarbonate? trying to learn how to do raised text without burning the plastic.
Can I use the test cards that I purchased for Xtool P2 on my 30 watt ComMaker Fibre Laser? If so, which ones? If not, do you have a set for Galvo Machine? Thank You. Jim Curnow
Hello, I have one question.is there technique to achieve same result for anodized aluminium surface? thank you in advance.
Hi there I want to learn how to colour engrave, do you have any resources that could help me or any video tutorials please could you attach a link .
Thank you
Pure red parameter is? On stainless steel thanks.
Crazy. Color withoutt pigment. Amazing
What are the specs of the laser you're using here? Wattage, Lens size?
What's your Frequency setting for this? I need to put something like this together. Also, food safe after engrave and cleaning?
Can one do this with aluminum?
very good information, Tnx for sharing your experiment
My pleasure
excellent video, just ask if it is a special type of plate or can it be made with anyone
Thank you so much! Can't wait to go to work snd try it 😍
Extremely smart setup. I was wondering what frequency were you using? (I'm talking about the first section)
Thanks for sharing this idea.
Thank you very much.It was so useful.
My question is " Remaining color is on surface Permanent ?
I have same machine you should make video To know how you did it
Dear Roger ,thank you for giving us your knowledge ,can you please advice if it was the same with a 200mm lens?
Yes, it is
@@rogerwebb9600 thank you Greetings from Greece
Thank you for the video lesson.. I have a 30Q Raycus laser (30w), F-290(200X200) . Will I also be able to do color engraving with my laser? If you have the exact parameters, how to set the settings in the EZCAD 2 program
Yes, absolutely
@@rogerwebb9600 Thank🖐
@@rogerwebb9600 How can I contact you? Do you have a whatsapp number? please send it
Hi, there is a facility on my patron pages for technical help www.patreon.com/user?u=15079773
Great work. Thank you. I will test it on my new Fiber Laser. Nice.
I'm trying to make a test grid like this and every time i change the settings on one pen in ezcad it changes the rest of the pen settings. Any tips on how to change settings on only the pen selected? Thanks in advance!
HI, can these colors be achieved on glass sir? thx
I don't think so
can you please link or send the test pattern with hrz changes?
Is there a special machine for gold .. I did not find a machine to do colors on gold.
Te felicito por tu excelente trabajo, muy agradecido por compartir con nosotros tú conocimiento. Éxito y muchas gracias.
Stainless steel, laser and color, wow !
Hi Roger, fantastic video, many thanks. Would love to hear your comparison technically of this Laser versus a Rycus Mopa on your next colour trial. Kind regards Gavin
In first diagram what is frequency?
Could you inform which laser you use? Make and model please
HI, its a Raycus 30W split system fiber laser about $5,000 to $6,000
can confirm jpt mopa laser can do very precise and consistent color control on stainless without having to defocus.
What model are you uding for the full colour please?
What is hatch
Could you tell me please what type of machine is that? Where I can get one?
Hi, its a 30 watt Fiber laser and I would only use Thunder Laser
what laser source??
pretty damn cool ! good luck with it Roger
was this 100% of the 30w power or 30% power?
Could you create a full color photo with this process??
I have same machine MOBA 60w
I have a question in 9:38 any size of lens you use?
What software are you using?
Thanks Roger, what is the software that is driving your laser?
EZCAD
Where can I get a chart for various engravings even for colors for our Omtech 50watt fiberlaser?
Any help would be much appreciated?
Hi, there is a facility on my patron pages for technical help
www.patreon.com/user?u=15079773
Hello,
whats the name of the laser software?
EZCAD 2
@@rogerwebb9600 Thank you.
Have you any practice or solution to easy change the different variables on test patterns?
For example, I mean a table in EzCad? 🤔
Can you please tell me where to download the test file
On my Patron pages
www.patreon.com/user?u=15079773
amazing u are the best
I can’t understand why I only get 1 color mark no matter the settings
You need to be 1.5 to 3mm out of focus
Hi Roger. How durable are these color markings. How do they withstand 3/6/12/24 months outdoors. Don't they fade out?
Hi, I have a video for you. Fiber laser colour marking *ALERT* information you need to know
ua-cam.com/video/ZWbAbUJ31Wg/v-deo.html
@@rogerwebb9600 Thanks a lot! Watching it right now.
what is the power rating of that fibre laser?
30 Watts
@@rogerwebb9600 thats pretty nifty, im using a 50 watt fibre with the EZCad software in my place of work, we also have a 50 watt CO2 aswell, wouldnt mind setting up a business of my own
Nice Video
Thanks
Great video. From your comments, this isn't a MOPA source? Can you let me know what machine this actually is?
did u find out please ?
YDFLP-E-60-M7-M-R
Can we buy this???
Hi have a look at Thunder Laser
merhaba bunu nasıl yaptığınızı çok merak ediyorum bana bunu nasıl yaptığınızı anlatma şansınız olur mu detayları ile bende yapmak istiyorum bu şekilde
Hi, there is a facility on my patron pages for technical help
www.patreon.com/user?u=15079773
Is it a MOPA laser?, or normal fiber laser?
No, 30 Watt fibre laser
Hi, can you email the dxf file?
It's on my patron pages
Do you have any experience engraving sterling silver? I've watched a few tutorials and read some posts but I can't for the life of me get it to work. I've got a 30W Raycus with a 270mm lens - I'm thinking the lens might be the issue but I can't say for sure
Hi, you need a 110 lens. + I have a video for you.
ua-cam.com/video/iem7XnREEps/v-deo.html
This a mopa laser?
Hi Paul, no this is a Q switch 30 watt fiber laser
Is that a mopa laser?
No, negative. It's a 30 watt Raycus fiber laser.
how permanent is the color?
Semi I'd wager. Don't want to put any acids on it that's for sure.
Prise
Hi, I have a video to help you.
Buying a fibre laser which 1? & who from? NEW for 2023
ua-cam.com/video/B0-uoI49uzo/v-deo.html
How much does this machine cost
USD$5000
You need 2b finish stainless I'd wager
WOW !!!
I think that you are getting anodizing confused with annealing. Annealing is heating ‘stressed’ metals, so that the metallic grains are relieved of their stress and are less likely to crack under further stress. Anodizing is applying an oxide coating to a metal to change its color and offer a degree of resistance to corrosion.
You are NOT annealing your stainless steel sheet, you are anodizing it.
Keep up the great work. I am enjoying your liber laser series.
this is incorrect
Alena Mall
You can help me sir
Yes?
@@rogerwebb9600 Hatch parameters were spoken for coloring??
Thank you sir
HANS MOLEMAN¡¡ :D
Did you actually watch this without eye protection? Do you need special glasses to watch a fiber laser work?
Yes!! special glasses!
Can it produce colors on silver and gold?