Toyota GR86 Front Splitter Kit Install
Вставка
- Опубліковано 22 лип 2024
- Follow along as Tom installs our Front Splitter and Air Dam on our Toyota GR86.
-----
GR86 Front Splitter Kit: www.verus-engineering.com/sho...
GR86 Air Dam: www.verus-engineering.com/sho...
BRZ Front Splitter Kit:
Subaru BRZ Air Dam: Coming Soon
-----
Facebook: / verusengineering
Instagram: verusengine...
Twitter: / _verus_
-----
Music Credit: Anemoia - Cascade by Simon Mathewson
-----
Chapters:
0:00 Introduction
0:14 Kit Components
0:47 Tools required
1:35 Taking Off Under Panels and Bracing
4:09 Drilling a Hole for Rivet Nuts
5:24 How to Install a Rivet Nut
6:30 Installing Splitter Clevises
7:34 Cutting Grill for Clearance
7:54 Assembling and Installing the Splitter Ties
9:16 Installing More Rivet Nuts
11:07 Reinstalling Bumper Braces
13:14 Installing Splitter Rivet Nuts and Clevises
14:52 Installing Splitter
20:51 Marking for Air Dam
21:12 Differentiating Pieces for Dam
21:51 Forming Air Dam to Bumper
24:09 Tracing Air Dam and Drilling Holes
26:34 Installing Edge Guard
27:33 Bolting Down Air Dam
29:33 Installing Support Brace to Splitter
30:44 Finalizing Fitment of Air Dam
32:18 Signing Off - Авто та транспорт
What size are the splitter rods?
any data on how much downforce this splitter creates?
We do not provide data for individual components as we develop our components to work together in kits to create the most efficient aerodynamic package for the given build volume. However, we do offer an informative packet regarding the data for this entire kit on the website.
@@VerusEngineering that's very helpful! thank you
@@TrackandBuild of course!
Is it possible to run this splitter without installing the splitter rods?
It is not advised. The splitter will see a significant amount of downforce at speeds above 80 mph and without the support rods, the rivet nuts could easily be pulled away from the bumper.
S15 pls
Unfortunately, the S15 chassis is just a little too old for us to look into production parts. We certainly appreciate the interest in our company though.
The install is super complicated 😂
We also have the full manual on our website! As always you can e-mail sales@verus-engineering or give us a call at (317) 734-3854 if you need additional help.