U hired a cameraman and got a friend idk much but the fact that pool jet is still popping in makes me happy love seeing the trio together good video as always
I'd like to see four on the back of the boat with the throttle rigged as one. Steering you would have to rig up some brackets with linkage to move them as one.
POOL JET!!! Love Flair’s videos, but they’re always better when: 1. Banjo is in them 2. Pool Jet joins the party Love the chemistry between the 3 of them
Hey Flair 👋 There are a few ways to increase performance of Two Stroke Engines! However my experience is with 2 stroke Dirt Bike Engines that have a massive aftermarket to support them! I honestly don't think that engine from Amazon has any support for that engine except tune up parts! The quickest and easiest way I've ever found to get quite good power increases without changing internal parts was installing and experimenting with a couple of higher temperature range high quality spark plugs. The next cheapest, and was the most effective power increase was switching from conventional oils both in the crankcase and the oil you mix into the gas. I personally chose Ams Oil, Fully Synthetic Engine Lubricants! That's gonna be your best bet for that Amazon Engine! Good Luck, and please let me how you make it with your experiment!
I believe AYO got the same motor and it was llloooouuuudddd! I love the new doors, you guys did a great job! I can't believe that a chicken got KO'd! I thought that cage was racoon proof! Damn that's loud when you're wearing headphones! It sounds like a sea plane coming in for a landing! 🛩 Yes, definitely do the tournament idea, that would be freaking hilarious 😂
It may not need a engine tune but a more aggressive prop will have a higher top speed but less low end torque if you can find a prop that fits it, it should rip even more
I don't think those chic hut doors are strong enough. Might want to wrap them in Kevlar and spray them with Ryno liner. 1/2" Steel plate on the inside at least
Flair @ approx 4:30min, use chicken wire and make a "skirt" around the pen. You overkill on wiring the CW to the pen, but the important part is to have 2-3ft of the c.w. as the anti-dig strat, but you'll need a kaboodle of anchors ⚓ to stake it down.
Love it! Yeah dude, you can tune up anything. Open up the air and slap a little muffler on that puppy to quite it down a bit. There's gonna be a way to tweak the throttle to get it to turn a bit higher. Definitely a better prop but be careful of the linkage and hardware that connects it. May not support the added drag and force from all the ponies your gonna squeeze out of it! 🤣 soo awesome. Wish I was rippin that puppy around the lakes near me.
You're definitely not going on a nature/bird watching tour with that motor, but it would be cool to keep filled with true fuel in your bass boat instead of an emergency paddle!
I have an extra 13 ft yak. Wish I could see how it works on a yak? Should be lighter and less water displacement. My other yak is an old town sportsman with a Minn kota 45 lb thrust and goes 3.9 mph tops. Same one Westin Smith has just a little longer.
45 pounds of thrust at 3 miles per hour is roughly equivalent to .4 horsepower. The formula is an easy one. Try increasing the size of the propeller (increasing thrust) to alter your speed. That may maximize the output from that engine.
Are you ever going to be able to let the chickens free range then? Maybe when they are older they will be able to run better? But man those flies are getting thick out there!
My birthdays on the 15th I’m turning 13 love your vids I love my ducks waterfall shirt that I got a couple months back thank you for giving me positivity when I’m feeling down keep up the good work 👍
Flair you should get a pond skipper motor it’s a predator 212 with a straight boom going out from the shaft that lards to a prop you can go about 30 to 40 mhp
Good job fellas you are getting good at this farm stuff. I have 30 young hens too so I'll be following your lead. We don't get raccoon in Australia but we have fox problems.
Get yourself some 1/2” x 3’ hardware cloth and wrap that cage. Also, Premiere 1 netting doesn’t need a complete circuit to work. Hook up your solar battery to one terminal and it should charge the entire length. It doesn’t need to make a circle.
Just saw Brad the builder, concerning the cabin. Just an idea, but was thinking about how you always do some serious cutting during hunting season. So possibly close in half or all of the porch for some cooking episodes would be awesome to keep you griddle from the mold cabin. That why its stays with you and your can cook for many. Hate to see it got to waste. If its propane you dont have to worry about wiring electric
U hired a cameraman and got a friend idk much but the fact that pool jet is still popping in makes me happy love seeing the trio together good video as always
pooljet sucks
I'd like to see four on the back of the boat with the throttle rigged as one. Steering you would have to rig up some brackets with linkage to move them as one.
Hey can
Yes
Yo I was thinking that it would be sick
Look at my comment and the reply is that the same guy that was scamming flairs subs
Sky Powell?
POOL JET!!!
Love Flair’s videos, but they’re always better when: 1. Banjo is in them 2. Pool Jet joins the party
Love the chemistry between the 3 of them
I would love to see all 4 of the beefcakes in a bass tournament with them boats it would be the best content ever made
Whoever is editing flairs vids needs a raise theses edits are fire🔥
In my experience with weedeater motors the muffler is very restrictive, a pipe should give you a little more power.
Yes straight piped motor I wanna hear it lol
Have done it with a chain and it made a huge difference
The pipe runs down to the water
@@stevesnycerski1802 not on these that only goes for an impeller driven motor
@@ElGancho08 they make actually nice pipes for weed eater engines
The best time of day is when Flair post a video.
Fax’s
fax
Hey Flair 👋
There are a few ways to increase performance of Two Stroke Engines! However my experience is with 2 stroke Dirt Bike Engines that have a massive aftermarket to support them!
I honestly don't think that engine from Amazon has any support for that engine except tune up parts!
The quickest and easiest way I've ever found to get quite good power increases without changing internal parts was installing and experimenting with a couple of higher temperature range high quality spark plugs.
The next cheapest, and was the most effective power increase was switching from conventional oils both in the crankcase and the oil you mix into the gas. I personally chose Ams Oil, Fully Synthetic Engine Lubricants!
That's gonna be your best bet for that Amazon Engine!
Good Luck, and please let me how you make it with your experiment!
I literally sit at home waiting for your videos lmao
Same lmao I stay up till midnight to watch his vids from Scotland
Sad life you live.
That's sad bud
Really sad go out side bro, go catch some bugs or sumn😂
I thought I was the only one I wait for this and river certified
I believe AYO got the same motor and it was llloooouuuudddd!
I love the new doors, you guys did a great job!
I can't believe that a chicken got KO'd! I thought that cage was racoon proof!
Damn that's loud when you're wearing headphones! It sounds like a sea plane coming in for a landing! 🛩
Yes, definitely do the tournament idea, that would be freaking hilarious 😂
I would love to see y’all go to a bass tournament in those things it would be hilarious if y’all win keep up the work we love you flair
It may not need a engine tune but a more aggressive prop will have a higher top speed but less low end torque if you can find a prop that fits it, it should rip even more
I don't think those chic hut doors are strong enough. Might want to wrap them in Kevlar and spray them with Ryno liner. 1/2" Steel plate on the inside at least
Anyone notice the butterfly that landed on flairs head at 4:49 🤣🤣
Every time you post it makes my day
That montage of flair just having fun in it was funny 😂🔥
Thanks Flair for the vlog! Hope you’re doing well!
Happy to see you back in the videos pool jet
Finally! Thanks for the upload!
Hey flair, love the vids keep it up man!
Better prop pitch. Stiffen up the blades or go metal to take the flex. Otherwise you will need a bigger gearbox/gearcase if the motor can handle it.
Flair @ approx 4:30min, use chicken wire and make a "skirt" around the pen.
You overkill on wiring the CW to the pen, but the important part is to have 2-3ft of the c.w. as the anti-dig strat, but you'll need a kaboodle of anchors ⚓ to stake it down.
are there slip-resistant options for those sheews? I would love some cammo work slip ons.
Flair makes it a better day when he post
I love this so much lol. Y’all should try and put four of those on it and see how fast it can go
24:45 flair got that Cboys music
I love your videos so much. They always make me smile and sometimes laugh. Thank you for making my day brighter.
Is it just me or did anyone see the butterfly on flair’s head at 3:25 and at 4:53 lol 😂
Love it! Yeah dude, you can tune up anything. Open up the air and slap a little muffler on that puppy to quite it down a bit. There's gonna be a way to tweak the throttle to get it to turn a bit higher. Definitely a better prop but be careful of the linkage and hardware that connects it. May not support the added drag and force from all the ponies your gonna squeeze out of it! 🤣 soo awesome. Wish I was rippin that puppy around the lakes near me.
Or he could put a bigger prop on it
@@blakemac172 u defo didn't read the whole comment
@@blakemac172 a bigger prop would most likely mess up that motor, lol.
@@blakemac172 bro he said that ....
great to see pooljet back!
I'd like to see you test different size props on it to see how fast it can get you.
Loved the video and yes you should definitely do 2 motors on the 10 footer
You're definitely not going on a nature/bird watching tour with that motor, but it would be cool to keep filled with true fuel in your bass boat instead of an emergency paddle!
100% should do the tournament idea. Maybe only two boats, but awesome idea.
You should def do a tourney in those boats and I would love to see some more bass fishing vids like the OG vids
Nothing better than a flair post then finding out that dux is dropping new shoes on the same day as your birthday 😎
I have an extra 13 ft yak. Wish I could see how it works on a yak?
Should be lighter and less water displacement. My other yak is an old town sportsman with a Minn kota 45 lb thrust and goes 3.9 mph tops. Same one Westin Smith has just a little longer.
It’s a blessing when you upload ❤
flair get 2 more and put the 3 motors in tandem essentially 12 horse and see how fast it is even if it's milk toast it'd be awesome
Who ever did the editing at 19:35 and on during that part Awesome touch with the math equations ahahaha 😂😂
Always a good day when Flair and the boys upload, those DUX shoes are 🔥🔥
Shews, if you will
I love it when flair posts a dose it suck video
Flair I hope you and everyone are having a great and fantastic day and I hope you and your family are doing well also sheeeeeeeew!!!!
Literally been waiting for a vid like this cheap Amazon motors thank you!
45 pounds of thrust at 3 miles per hour is roughly equivalent to .4 horsepower. The formula is an easy one.
Try increasing the size of the propeller (increasing thrust) to alter your speed. That may maximize the output from that engine.
That won't work like you think.
RiP
Love the bass tournament idea be funny as hell. Another banger
Could you imagine how loud that motor would be if it was a 300 hp motor 😂
Hell absolutely love every single video pooljet is in
SHEEEEEEW!!!!
🚤 🎣 🐠 🏹
The outdoor UA-cam 🐐 is back with another 🔥 🎥 🍿 💯
Thank you for always bringing us a banger every upload ✊
Great video !
A little work,
then a little play.
That's a good balance
to your day. 👍
Are you ever going to be able to let the chickens free range then?
Maybe when they are older they will be able to run better?
But man those flies are getting thick out there!
Everyday I check UA-cam to see if FLAIR posted. Dude is literally goated
Thanks!
What a amazing crew you have now
Yes! Fishing tournament would be hilarious!
Flair's dad sock game is proper!😂👌
Love all the vids look forward to seeing them and good to see old pooljet on the Chanel
I’d love to see you guys go to a bass tournament like that 😂
A reaction video of you guys rocking up to a tournament and using them you be priceless! You NEED to do this...
Nothing better then seeing Pool Jet back in the videos. My favorite thing, lol.
chickens getting ko'd means night vision hunting sessions soon😂😂
Still the best UA-camr out there recognizing a fan for now reason the main nan flair
Sheewwww summer 🇺🇸2022 for the boys 🥳
Sheeeeew!! Another great banger!!! I love the world's cheapest/ loudest motor ever 😆 🤣
Got to try those pond pumpers and see if that can propel a boat
4-10' jon boats with weed eater engines with $10000 worth of live scopes and trolling motors would be EPIC
Don’t be a pansy Flair. Option 3 on the Cabin 😎😆
My birthdays on the 15th I’m turning 13 love your vids I love my ducks waterfall shirt that I got a couple months back thank you for giving me positivity when I’m feeling down keep up the good work 👍
Flair you should get a pond skipper motor it’s a predator 212 with a straight boom going out from the shaft that lards to a prop you can go about 30 to 40 mhp
Tha b roll in the lil boat was dope!!!
Ending was amazing !!😂😂
That would be sooo f-in funny if you went too a tourney like that 😂😂. Amazing video idea.
I was waiting all day for you to upload a video but as soon as you post I’m at a family dinner lol
You should put a two-stroke exhaust on your weedeater
you should review all the outboard motors on insta !!!!! Much needed review
Been asking for the Shews for a long time now. Thank You!
Loved this video. You guys are awesome and so funny
Y’all should totally do a bass tournament with it
Good job fellas you are getting good at this farm stuff. I have 30 young hens too so I'll be following your lead. We don't get raccoon in Australia but we have fox problems.
Flair turning into Shaq…Never turning down an opportunity to make a bag
Beauty love to see pooljet back
Omg yes to the tournament 😂😂😂
Flair could post a Catch n Cook with the frozen nuggies and fries from his freezer and im still clicking immediately
You crack me the fuck up man!😂 man was throwing a party by himself on the boat😂
I just messaged it not sure if it worked
Flair you are hella hilarious, love your videos man shewww
It's always fun to see pool jet in a flair video
Flair hunt whatever is eating your chickens at night that would be crazy 🥰
Get yourself some 1/2” x 3’ hardware cloth and wrap that cage. Also, Premiere 1 netting doesn’t need a complete circuit to work. Hook up your solar battery to one terminal and it should charge the entire length. It doesn’t need to make a circle.
You need to buy the biggest tractor tire inner tubes, put strapping on them and a plywood center and one of those motors and have bumper boats !!!
Hey flair thanks for the upload
now you have to do some yard are on the construction channel using the motor
Great video Andrew
I recommend put some plastic netting under the kennel so no chicken or bird can dig or anything can go from under the kennel
Banjo is always tryna eat the farm animals 😂😂
I don’t know why this was so funny to me but I can’t stop laughing
Just saw Brad the builder, concerning the cabin. Just an idea, but was thinking about how you always do some serious cutting during hunting season. So possibly close in half or all of the porch for some cooking episodes would be awesome to keep you griddle from the mold cabin. That why its stays with you and your can cook for many. Hate to see it got to waste. If its propane you dont have to worry about wiring electric
Congratulations you bought a weedwacker with a prop on it 😂😂
Sheeeeeeeewwww What’s going on folks, never gets old😂😂😂
Moving up in the world, I like it !
A bird lands on his head at 4:49😂