How to Install Aluminum on a Teardrop Camper - Start to Finish - Timelapse (Video 8 of 10)
Вставка
- Опубліковано 1 сер 2024
- This is video 8 of our Build a Camper Series - a time lapse of installing the aluminum siding, roof and trim, on a teardrop camper, start to finish.
Want to build your own?
Free Resources:
wandertears.com/free-resources
Buy the Kit!
wandertears.com/kits/p/vaga
PDF Guide to build the trailer frame:
wandertears.com/diy-plans/p/g...
Full blueprints and plans to build a teardrop camper:
wandertears.com/diy-plans
Connect on Instagram:
wandertears
Connect on Facebook:
wandertears
Timecodes:
0:00 Cutting Aluminum
2:10 Installing protective diamond plate
3:00 Installing Roof Aluminum
3:46 Installing Wall Aluminum
4:22 Installing Trim
7:37 Installing Teardrop Camper Doors - Навчання та стиль
Wonderful
Should make some step by step vids that are not timelapse id pay for those.
In the works!
What is that tape you use at the seams?
What nailer are you using when tacking the sides of the roof down?
How much
Is 3mm 1220x2440 aluminium sheet
From a dealer
What gauge aluminum are you using? Do you have a preferred supplier for the aluminum sheets? Seems you are "floating" the siding but still using adhesive for the parameter of the panels?
We use .040 or .050. Diamond plate is .063. And yes, we float the walls as they tend to flex with the temp more. And the adhesive is actually a flexible RV sealant. It helps hold it in place but also does not harden fully.
Where do you get the aluminum?