I'm getting different LUFS readings from the WLM Meter and the WLM Plus on the same channel. The WLM Meter shows -23 LUFS, while the WLM Plus shows -27 LUFS. Can you help me understand why there's such a discrepancy between the two measurements?
Do you have to put this plugin on a stereo aux track and bus out to recording audio track ? Or can you just put it on channel with audio and bus out to recording channel?
For my podcasts I have been aiming for -14 lufs . I have been using the WLM plus meter, my question is how significant are a few 'overs' if the meter still gives an average longterm of -14 at the end of the track? Will this affect how Spotify compresses the track? should I go back and tame the 'overs' before I upload? And should I be set to "Dial" mode for a podcast? Thanks
Thanks for your tutorial. I am just looking for a meter as my mastering software has the peak normalizer already in it. So I think I will get a different meter. Your video was most helpful
Hi there, nice vid. Question: How do you get the the waves wlm, to record and show the automation warning? I'm running pro tools 12.7 with waves wlm v10, & for some reason I can not get the automation warning to show. I created aux, routed signal to aux using bus, I can get it to write but it does not show red automation line like in your video. However if I switch to read and play back it will read it. Any suggestions to resolve this issue?
I have a question about true peak. I puted L1 Limiter with out ceilling at -1.7db and also the L1+ ultramaximizer with out ceilling at -0.5db before WLM+ stereo. And this one continue to clipping at -0.1 db without the true peak limiter. may be can you explain me what happen? L1+ultramaximizer and L1 limiter aren't working in true peaks? NOTE my master output show -1.7 db
As far as the processing at the end of the program, how do you then make sure the stems of the individual elements: dialog, FX, Music, etc. match the mix stem?
It Works Brilliantly On Mix . But When I Make Separate Stems (Music, Efx, Voice) Levels Are Going Crazy . Any Suggestions How To Make Separate Stems At Correct Levels ??
You are measuring the loudness of your mix. If you're measuring each tracks separately you're not measuring the mix. That's like you're putting 5 carrots on a libra and wondering that a separate carrot is lighter than all together.
where should i look if i want to learn or take a course particularly about using this plugin because i want to know how to use it properly especially for songs when i create my masteres for different online or TV services. can any one please tell me ?
Thanks for a thorough appraisal of this plugin. Appreciated!
This thing kicks ass , just recently i was able to finally get one of my songs to -5 LUFS which for me is fucking great.
Jesus. Is that a good thing? Is that a brick wall?
@@oinkooink that must be techno music
Brilliant plugin and very useful :)) Thanks for nice review Mike:)
I'm getting different LUFS readings from the WLM Meter and the WLM Plus on the same channel. The WLM Meter shows -23 LUFS, while the WLM Plus shows -27 LUFS. Can you help me understand why there's such a discrepancy between the two measurements?
im so confused but i still watch
how to use WLM in live? on recorded tracks is just to put on the master, but live? how to use this on a Facebook live for example?
Do you have to put this plugin on a stereo aux track and bus out to recording audio track ? Or can you just put it on channel with audio and bus out to recording channel?
Never mind, I figured it out. Simply fix. Forgot to write enable plug-in from Automation window. Thanks for the video it was very helpful.
What does the 18* mean?
For my podcasts I have been aiming for -14 lufs . I have been using the WLM plus meter, my question is how significant are a few 'overs' if the meter still gives an average longterm of -14 at the end of the track? Will this affect how Spotify compresses the track? should I go back and tame the 'overs' before I upload? And should I be set to "Dial" mode for a podcast? Thanks
So I have to buy the plugin again just for the limiter?
Thanks for your tutorial. I am just looking for a meter as my mastering software has the peak normalizer already in it. So I think I will get a different meter. Your video was most helpful
R128 (-23 LUFS ± 0.5 LU) is my brief, what is the ± 0.5 LU mean?
Hi there, nice vid. Question: How do you get the the waves wlm, to record and show the automation warning? I'm running pro tools 12.7 with waves wlm v10, & for some reason I can not get the automation warning to show. I created aux, routed signal to aux using bus, I can get it to write but it does not show red automation line like in your video. However if I switch to read and play back it will read it. Any suggestions to resolve this issue?
I have a question about true peak. I puted L1 Limiter with out ceilling at -1.7db and also the L1+ ultramaximizer with out ceilling at -0.5db before WLM+ stereo. And this one continue to clipping at -0.1 db without the true peak limiter. may be can you explain me what happen? L1+ultramaximizer and L1 limiter aren't working in true peaks? NOTE my master output show -1.7 db
+brandtkalk edgard You wouldn't place multiple limiters on one track. and Ceilings on limiters are irrespective of the WLM true peak capabilities.
As far as the processing at the end of the program, how do you then make sure the stems of the individual elements: dialog, FX, Music, etc. match the mix stem?
Thank you for the video, I enjoyed it a lot.
It Works Brilliantly On Mix . But When I Make Separate Stems (Music, Efx, Voice) Levels Are Going Crazy . Any Suggestions How To Make Separate Stems At Correct Levels ??
Honestly?
Sascha Soundso ??
You are measuring the loudness of your mix. If you're measuring each tracks separately you're not measuring the mix. That's like you're putting 5 carrots on a libra and wondering that a separate carrot is lighter than all together.
Sascha Soundso Hey, Yes I Got That. But Question Is How To Do It. Please Let Me Know How To Tackle It If Possible .Thanks
So helpful, thanks :)
where should i look if i want to learn or take a course particularly about using this plugin because i want to know how to use it properly especially for songs when i create my masteres for different online or TV services. can any one please tell me ?
Contact jeliezin@gmail.com and ask for a private lesson online. Tell her Haabi sent you
Thanks
بيبع
بقففغ
I unsubscribe when I see unanswered questions in the comments section.