CFMoto Z950 Sport: Exhaust Tips Upgrade from Whiskey Bent
Вставка
- Опубліковано 15 бер 2021
- Sooo...I had one of these on my Uforce 500 and it kept the heat down and made it sound awesome. I've been curious about the ones for the Z950 Sport and I have seen a lot of people asking about them in groups....so here we are. Whiskey Bent Metal Worx exhaust tips for the Z950 Sport. I run a few tests, one being a heat test with a temp to see if they really live up the claim that they lower exhaust temps and a very basic sound test which consisted of just putting my mic in the same spot and revving the motor...lol. They have a bunch of different tips for a variety of machines and I can for sure say that the quality and craftsmanship of these tips are 100% top notch.
You can find these here: whiskeybentmetalworxandmotors...
#cfmoto #z950sport #cfmotozforce950sport #cfmotoz950sport
MudMilitia Gear - themudmilitia.com - Use code "JUSTIN" and save 20% off your entire order!
Pro Armor Harness: amzn.to/3p7cCoG (cheaper to buy individually than as a set for some reason)
7" Bumper Light Bar: amzn.to/2MrbUVO
Alternate Light Bar: amzn.to/36Cu51Q
Roll Bar Clamps: amzn.to/3tl9hFQ
Bumper Light Bar Rocker Switch: amzn.to/2YFLPFe
Full E track tie down kit: amzn.to/3qmYYyI
E Track plates: amzn.to/3bI4MPa
E track straps: amzn.to/38LzqoQ
Where I buy my factory accessories and parts: cfmotowarehouse.com
Current list of accessories:
CFMoto factory lower door inserts: www.cfmotowarehouse.com/doors...
CFMoto factory front bumper: www.cfmotowarehouse.com/5by-8...
CFMoto factory rear bumper: www.cfmotowarehouse.com/5by-8...
CFMoto factory side view mirrors: www.cfmotowarehouse.com/5by-8...
CFMoto factory rock sliders: www.cfmotowarehouse.com/5by-8...
CFMoto rear cargo box: amzn.to/38co6Sn
3 Star Industries Front Vented Windshield:tinyurl.com/ybyzmwkg
3 Star Industries Rear Vented Windshield: tinyurl.com/y7vxxv3g
4ft LED Whips: amzn.to/35cpnaf
Factory Turn Signal Switch: www.cfmotowarehouse.com/5hy0-...
LED Turn Signal Flasher: amzn.to/35a2Ivi
PowerBass XL800 Soundbar: amzn.to/3pSu94u
CFMoto Long Sleeve Shirt: amzn.to/3hSZ79X
CFMoto Short Sleeve Shirt: amzn.to/2JSFXo6
_____________________________________________________
Alternate lower doors: amzn.to/3neZZXx
Alternate front bumper: amzn.to/38euFEf
CFMoto factory oil filter: amzn.to/3hPocTh
Aluminum Skid Plate: amzn.to/3rWV7tF
SuperATV Front Windshield: amzn.to/2LkNmwS
SuperATV Rear Windshield: amzn.to/3n9s9TS
SuperATV Half Windshield: amzn.to/3hJon2p
Inexpensive Clutch Compression Tools on Amazon:
amzn.to/3q5Gin7 - $39.99
amzn.to/3npSflM - $54.99
Grease : amzn.to/3iSBLBL
Electric grease : amzn.to/3cjXOjF
Lucas Oil grease: amzn.to/2KTqsNp
______________________________________________________
Follow me here!
Instagram: @justindrake714
Facebook: / drake0714
TikTok: @justindrake714
-----------------
By Justin Drake
If you like my videos subscribe to my UA-cam channel.
/ justinthecreator
---------------------------------------------------------------
---------------------------------------------------------------
EQUIPMENT:
Canon 1DX mark ii: amzn.to/3nldNQx
Tamron 24-70mm G2: amzn.to/3hSEKK8
GoPro Hero 9: amzn.to/3bk1sti
DJI Mavic 2 Zoom: amzn.to/2JSGh6i
DJI Mini 2: amzn.to/2Ltqv2g - Авто та транспорт
OMG what a difference. Sounds much better now. Great video Justin.
Thanks 👍
Killin it with the production.
Thank you 🙌🏼❤️
Awesome video man those sound nice! Got my 950 sport, and love it for my first sxs. Can't wait to see you and blake ride together!
Thank you so much! I’ll be down there the day after tomorrow! We are both so excited! Really appreciate you watching and the kind words, brother!
That's really nice. It's so easy to do man. I was looking for something to do with the exhaust to. That's probably the cheapest way out for now till I get some miles on it. Then change it all out. Thank you very much again justin. You have helped me out a few times now bro. Stay safe. God bless. And ride on. Lol
Thank you so much, Thomas! Really appreciate you bro! I will probably change mine all out, too, at some point. Glad I’m able to help!
OMG what a sound difference. It does sound much better. Great Video Justin.
Thank you! Appreciate you, Tony!
I love the Idea of lowering the temp. good job.
Thank you, Mike! Really was shocked to see how much it actually does lower the temps!
Definitely deeper and cooler temp. Very nice. Looks good too
Thank you, Phil! Much better sound and really like the idea of the cooler temps
Bro!!!! Those definitely sound good! I had the video playing thru my truck speakers and I almost had to turn the bass down when you cranked up with the new tips haha
They really do sound pretty good...lol.
The creator for sure. Great production, and you and blake already are putting them on the map. I see Bright UA-cam and beyond futures for y'all.
Thank you so much! Appreciate you, brother! 🙌🏼
Nice one man, Still waiting for the replacement belt video 😃😄😀
Coming on Thursday!
8:43 soooo that’s why I found a disassembled smoke detector on the kitchen counter the other day 🤣
uhhhhh....what happened?
I hope your gonna wrap it in black soon, it would be cool to see what it will look like👍
Oh yeah, Chris! It’s coming soon!!!
Omg justin. I did my back bumper not bad at all. I had to file the holes over a little bit. But the front bumper was a great pain in the ass. Lol. I got the one with the skid plate that goes under the front about a foot and a half. I had a hell of a time lining up the bottom holes. But they are nice. Rock sliders are gonna go on tomorrow. Because I'm old. Lol
Awesome! Glad you were able to get them on. Most of the accessories have to be wiggled around and fought with, but they will eventually fit. Lol
🏆🏆🏆👍🙏
Thank you for sharing.
Thank you for watching! Always appreciate your comments, Dr Mark! 🙌🏼
Hey can I know the diameter of the circle for the bottom of the pipes I’m trying to make them homemade
Justin do you like the Whiskey Bent exhaust tips, do you think they are a good investment?
I do like the price point and like the idea of having the engine run cooler.
Hello Justin, where did you get the black fuel cans? Or did you plastidip them?
Thanks, Filip.
There is a video on his channel for them not too long ago they come black and fit with the factory storage box on the back I just ordered some myself
did you notice a decibal difference by chance? i could see those spark arrestors baffling the noise down but was just curious.
Yes. Definitely noticeable, deeper tones
Great ! And now your max speed ?how much
Max speed is 73 at last test
@@JustinTheCreator ok! Same speed for me . Full Stock . Only ECU
Do you have a link for the tips ?
Here ya go! whiskeybentmetalworxandmotorsports.com/shop/ols/products/z-force-performance-exhaust-tips-custom-45-degrees-degree-zforce-cfmoto
Do they have these for the force 600 2022
They should!
Did you get the 1.5 or 2.0 diam.
I got this one whiskeybentmetalworxandmotorsports.com/shop/ols/products/z-force-performance-exhaust-tips-custom-45-degrees-degree-zforce-cfmoto
Its 2” and there is no option
That temp gauge isn’t accurate against shiny or reflective materials. And the closer you have the tester to the source the more accurate. Thanks for your time making the video.
Any more power? I just think they are ugly...how do you like the rear window?
Hey, Chris! Appreciate you watching and reaching out! I haven't been able to properly test it for any kind of noticeable power differences, but I will this weekend! You think the tips are ugly...or the 950..? ABSOLUTELY LOVE the rear window. It makes a world of difference, especially if both front and rear are vented
@@JustinTheCreator man I just got done installing some after market side mirrors and a rear view mirror. 100 big ones later...they are junk. When I was doing the rear view mirror I noticed the tabs on the top of the roll cage are not center nor is the bolt where the roof attaches to either. Did you notice this? I wonder what the tabs are for anyway since the roof covers them (look like light tabs). Need to say my rear view mirror is of center!?!?
Oh yeah and the tips are ugly not the zf 950.....I just like the stock better based on looks. Are you going to do your all satin black?
Those are priced higher than willy Nelson. Im guessing just changing the spark arrestor would do the same thing.. One thing I'm not liking about the 950..everything is priced way to high for them.
Great video though
Thank you! I agree that it’s pricey...but I appreciate the quality and craftsmanship of them along with the customer service. And I gotta make videos...so. Lol
And lol @ higher than Willy Nelson 🤣🤣
Couldn't you just cut the spark arrestor off the stock tip
I want some pipes that give off some Flame lol on mine
Me too! If you find some, let me know! 🤣
CF Moto Warehouse is closed?
Are you going to keep them or go back to stock?
I’m gonna keep them! I love the way they sound and the lower temps I can’t argue with 🤷🏼♂️
@@JustinTheCreator did u just order 2 of the zforce/uforce one? Didnt see the 950 on there
@@edclements5112 he’s putting it up right now! Not sure what happened. Lol. Should be ready to go in the next 10 mins or so
@@edclements5112 it’s live whiskeybentmetalworxandmotorsports.com/shop/ols/products/z-force-performance-exhaust-tips-custom-45-degrees-degree-zforce-cfmoto
When you shop at Harbor Freight, you get Harbor Freight. Enough said
It was for an infrared thermometer...lol. I’m sure it works like it’s supposed to 🤣
I definitely wouldn’t buy something that I need to last forever from there
@@R.N.GPerformance I am with you on the lifetime warranty, for sure! And they are getting quite a bit better. I have quite a bit of HF stuff.
The new icon series is nice alittle expensive for HF but still cheaper then the big names and i put my tools through hell and they hols up. Mechanic is the army and end up using my own stuff alot of time.
Wear your seatbelt bro
😬😬😬
I don't think that tip help at all it is the steel net thingy who are the problem on the orginale one remove that and the put on a flat one then that's it! And this product is way overprized too!