How to run and operate Grass Trimmer Stihl FS 40

Поділитися
Вставка
  • Опубліковано 29 тра 2016
  • This is tutorial on how to run and operate gasoline grass trimmer. Based on Stihl FS40.
    Link to other video (with instructions how to mix fuel): • Jak włączyć i obsługiw...
    You are welcome to visit my homepage: www.cierkosz.com
    Original instruction manual from Stihl: www.stihlusa.com/WebContent/CM...
    This video was recorded for entertainment only and is not an official and proper guidance.
    Always follow original instruction, video is just suggestion and I don't take any responsibility for not proper use. Equipment like this can be dangerous in wrong hands.
    By buying on amazon you can support my channel: www.amazon.co.uk/gp/search/ref...
  • Навчання та стиль

КОМЕНТАРІ • 37

  • @shermanhatch1916
    @shermanhatch1916 6 років тому +5

    Thanks for starting the unit on the ground that's the proper way!

    • @mrCierek
      @mrCierek  6 років тому +1

      safety first;) Thanks for the comment

  • @verwolfpack
    @verwolfpack 4 роки тому +2

    Love the noise only Stihl makes

    • @mrCierek
      @mrCierek  4 роки тому +2

      old, good 2 strokes. My old Yamaha Aerox scooter sounded similar

    • @verwolfpack
      @verwolfpack 4 роки тому

      Piotr Cierkosz yep, it sounds like a bike, with that metal clanging noise. I’m slowly changing my garden maintenance equipment to stihl product

  • @buster1173
    @buster1173 Рік тому

    Good job

  • @laciluisa1
    @laciluisa1 Місяць тому

    Tank you

  • @michaelrizza6003
    @michaelrizza6003 Рік тому

    You didn’t show it ,but you got the petrol cap back on … well done

  • @daisymermaid1418
    @daisymermaid1418 3 роки тому

    what about changing the uber complicated strimmer spool flex??

  • @HitmanDarts
    @HitmanDarts 4 роки тому

    Was the head spinning before you even pressed the throttle

  • @teachmetruth3539
    @teachmetruth3539 2 роки тому

    How do you install the cutting head and shield? 😢

  • @HowardARoark
    @HowardARoark 6 років тому +1

    Does this trimmer have a "bump feed" or 'tap'n go' style of head, ie you bump it on the ground to extend the cutting line ?

    • @mrCierek
      @mrCierek  6 років тому

      you can simply bump it or extend by hand if you want to extend the head's lifetime. However, I have it for almost 10 years now and no issues at all

  • @davidhitchborne9744
    @davidhitchborne9744 7 років тому +5

    You need to clean the grass off the fuel container to avoide getting grass clippings in the machines fuel tank.

    • @mrCierek
      @mrCierek  7 років тому

      You are right. Thanks for comment:)

    • @davidhitchborne9744
      @davidhitchborne9744 7 років тому

      Thanks for not hating me :-) I Just bought FS 50. Very good machine, but I have trouble with the autocut head.

    • @kong3
      @kong3 6 років тому

      Absolutely.And you make sure mix is correct my measuring the oil to fuel ratio when you fill fuel can. Red color has a wide range of ratio. Lame

    • @tgun9248
      @tgun9248 4 роки тому

      Those fuel caps can be troublesome to use when they get old.good little strimmer though

  • @mariosalazar5728
    @mariosalazar5728 3 роки тому

    Hi, can you explain how to mix the gas... and put like name and picture of fuel additive to add to gas and what kind of gas. Thank you

    • @jackjoyce1744
      @jackjoyce1744 3 роки тому

      It’s quite easy
      Get your 5 litre jerrycan full with fresh petrol or gasoline. Then look on the machine itself or the manual for the ratio of petrol to 2 stroke oil. If it’s the universal mix, it will be 50:1 so 50 parts petrol to 1 part oil. That would mean for 5 litres of petrol you’ll need 100ml of 2 stroke oil. If the machine needs 40:1 ratio then divide the amount of fuel you have in ml by the ratio so for example, divide 5000ml by 50 or 40 depending on the required ratio then that will tell you the required amount of 2 stroke oil.

  • @ol2533
    @ol2533 3 роки тому

    Good video!
    Does the trimmer always start at full throttle on the first start? Mine starts at full throttle / full speed and I need to pull the trigger once and then it goes into idle. Is that normal?

  • @Goddesstheresa180
    @Goddesstheresa180 2 роки тому

    what did you mix?? you didnt explain what to mix

  • @scottdavies7900
    @scottdavies7900 4 роки тому

    Do you have a video to re wire the SF40 as I find it very difficult to do? Thank you.

  • @darussianping61
    @darussianping61 4 роки тому

    is this strimmer suitable for large garden? i am ambivalent.

    • @mrCierek
      @mrCierek  4 роки тому

      It is designed for small gardens. However, I used it for my garden (around 400sqm), my parents garden (400sqm), sometimes my grandmas garden(2000+ sqm) and neighbours gardens to earn while studying.
      Have it for over 10yrs and it's running like new

  • @robtho7379
    @robtho7379 5 років тому +2

    He didn't even put the cap back on before starting it.

    • @mrCierek
      @mrCierek  5 років тому

      Thanks for pointing that out. However, it tends to loose after couple hours of work and guess that was the issue. I admit should check it before start.

    • @keithrobinson9077
      @keithrobinson9077 4 роки тому

      Because stilh in their wisdom changed the design of fuel cap, and its a right pain in the arse,

  • @ecogardenerhuertayjardin9913
    @ecogardenerhuertayjardin9913 5 років тому

    Never full over the grass...is dripping

  • @feasealhanif2594
    @feasealhanif2594 3 роки тому

    bearly heard you

  • @mmafyasco
    @mmafyasco 4 роки тому

    Couldn't hear shit with the engine running..

    • @mrCierek
      @mrCierek  4 роки тому

      It is quite noisy, that's why I've added subs

  • @TheDrum2010
    @TheDrum2010 4 роки тому

    Rubbish