@@ameliahiggs5483 I was stuck to but I’ve found that ink jet do stencil paper at the size of 8.5in x 11in, the ink I use in mine is also the ink jet printer stencil ink (quite expensive) 2 bottles should fill all the eco tanks. And a little trick is empty the refill bottles that come with the printer and refill it with the stencil ink, makes a lot faster. Hopes this helps!
I also have an Epson M1120 printer. but I still haven't found paper to be able to print tattoos. Can you please tell me where I can find this special tattoo paper? if it exists on amazon or something
TattoosByBonek yes at times it does jam up, i i think because the paper is too thin and the printer pulls it in fast. I can print a good amount of stencils before i have this issue.
I red about some dude claiming that the ink they use for this kind of stencil is just gential violet. But some say gential violet has larger pigment and may get stuck in the print heads. Gential violet is very cheap unlike this inkjet stencil ink costs so much
Put ink in all only halfway cause if you print from a colour picture the printer won’t be able to get the contrast of the drawing best to fill up the black but only need halfway in the colour tanks 😁
Stencil ink jet ink , they also have a combo package where the paper comes with it. Its just tracing paper you can also buy at any local art store. Ive tried printing it on regular printing paper and that works too.
Do not invest in this, it's trash. Your better off printing out a lined version, size it and then run it through a standard thermal machine, especially for line work, there's no point in wasting this much money on a line drawing. Where the real problem lies is how the printed stencil works with what it's intended for, gradient photos. The dark areas blend into the greyshade and dilutes the detail; while you can what's shaded and what's not, the definition is pretty much all blended together and actually makes it harder to read then a hand drawn stencil map. Learn how to make a stencil by hand like a real professional and that's all you'll ever need, there's no shortcuts for good tattoos.
Making a stencil by hand is totally unreasonable if it's for something like an entire back-piece or full-body piece. I'm not about to spend I don't even know how much time to give myself carpal tunnel drawing the same thing three times over to make a stencil by hand for someone's whole back and I don't think that makes me any less "real" of a professional or my tattoos any less "good," cheers.
I just hooked mine up and it prints the maintenance copies just fine but everyone I try to print my design it comes out blank! Help! Anyone have this issue?
Setting of the printer pls ...do you print b&w or colour ...what paper type you mark in settings(normal paper,photopaper etc ...and what stenci solution you're using )
I have it and its a nightmare! the inkjet stencils clogged one of the nozzles, in order to run a power clean, your ink tanks have to be at least half ways! if not you run the risk of damaging the printer permanently, that ink bottle is only 4oz not to mention the price, so I ran the power clean it almost emptied out my tanks, so now I have to purchase more ink that's over $160 with shipping and handling. The printer was over $340 with tax and shipping and handling I put 2 ink bottle, each over $160 so now im a little over $660 and its still giving me printing quality problems. I don't know if this ink voids the warranty of the printer, but its not really worth it in my opinion, not to mention that the stencils are weak and will disappear with just a few wipes.
make sure to use the recommended paper because it will not work with other types of paper and its only $25 dollars for 500 pages which you will ony use about 300 to 350 pages because the rest will go to s!i#!
@@ismailxatzisouleiman8854 they make it look so good and easy in the videos don’t they. I’ve had the same problem when I’ve been able to even print out a pattern, very light and doesn’t transfer to the skin very well
Zum Drucker mal meine Erfahrung. Ich habe den epson et 2751 am 9.12.2021 gekauft und mit inkjet stencil fluid befüllt. Dieses liquid ist nicht gerade billig im Gegenteil es kostet richtig Geld. Ich habe das liquid eingefüllt und habe ein paar Test Seiten gedruckt. Alles war super. Die Vorlagen mit denen ich gearbeitet hatte waren bei einer Skala von 1-10 vom Ausdruck eine 8 Von der Intensität eher eine 4 Beim auftragen lösen sich nicht viele Pigmente des liquids. Beim arbeiten ist es gefährlich zu oft zu wischen. Da das stencil schnell verschwindet. Der Drucker druckt feine Sachen auch gut aus. Nur ist es gefährlich das Gerät mal eine Weile nicht zu benutzen. Was bei mir nun der Fall ist. Wir haben den 26.04.2022 und der druckkopf ist bei mir durch. Das fluid trocknet wohl stark an und der Drucker macht seine arbeite nicht mehr ordentlich. Bis auf garnicht! Ich hatte nämlich dieses Problem gehabt das ich drei vorlagen ausdrucken wollte und schon bei der zweiten war das stencil total blass und nicht vollständig bedruckt. Habe mit dem Epson Support gesprochen und muss ihn heute einsenden. Ob ich danach einen neuen druckkopf auf Garantie eingebaut bekomme bleibt fraglich. Da ich nicht die original epson Tinte befüllt habe wird das wohl ein Problem werden. Mal schauen wie kulant die sind. Aber ich ahne nichts gutes. Obwohl das stencil fluid für den Drucker „angeblich“ geeignet ist würde ich ihn nicht wieder damit befüllen. Ich habe mir nun den thermo Drucker von Brother-PJ773 gekauft und muss sagen das ich extrem zufrieden bin. Meine Meinung zum Gerät. Wenn das Teil unter regelmäßigem Gebraucht genutzt wird dann könnte es sein das man vllt diese Probleme umgehen kann. Aber kann es nicht genau beurteilen da er ja nach einer Standzeit von vllt 2wochen schon aufgegeben hat. 😂 Wer zu viel Geld hat und nicht weiß was er damit anstellen soll. Der soll sich den Drucker für aktuell ca 250-280€ kaufen Dazu noch das liquid für irgendwas mit 200€ oder als set evtl und probiert es selbst. Ich bin garnicht begeistert von diesem Gerät und rate euch allen lieber einen thermo Drucker zu benutzen.
Hi, thanks for your video! I have one question Left now.. Is it possible to swap the stencil ink for regular ink? I want to use my Epson printer for stencils and for normal colour prints
I want to get one but I mean beats the purpose I need it for I don’t want to trace I always hand trace I want something that I don’t trace and just prints
No..you need those type of new printers with the eco tank , that way you can fill it up with stencil ink it’s very easy but these printers are around $200-$300
Does the ink dry in the tank say if it’s not used often. I’m a beginner and learning I don’t want the ink to dry in the reservoir if I’m not using it much
@@youngz9163 You have to make one print a week to make sure that the injectors are not getting blocked from dry ink, the printerheats get destroyed too because of dry ink because the wet ink cools them down in the printing process. Hope this explanation will help 😉.
I don’t have a iPad can I use my iPhone ??? And how do u adjust the paper size and why does the picture for the stencil come out small when I adjusted it big it’s actually very frustrating to get it the size I need it to be on stencil paper
You download the app for this printer, i have it on my ipad and it prints from there, you can print any size. I havent used the printer to scan or copy a picture to print a stencil
I have the eco tank. I set it up to print stencils by filling all the ink tanks with stencil ink. I print on black and white and turned the saturation up all the way. I use pacon transfer paper and the stencil doesn’t transfer good enough to use. Its very faded and weak. I use stencil stuff to apply. I had to resort back to my thermal printer. Smh
Hey guys and gals, I’m using inkjet stencil ink and good stencil paper for this, but we keep getting head issues on the printer, eco tank 2710 - anyone having similar issues ? Been trying to find a thread of comments to get some advise we do a full clean
Everett yes the stencil ink pack comes with their own spray bottle, once you apply it on the skin you can put down the printed paper on top. Fyi i tried stencil stuff and it doesnt work good
I’ve bought everything ink jet stencil ink with spray epson et2760 printer my pictures are printing out super light and it’s not being transferred to the skin what is the solution
Hi I have a epson 2720 and I was curious as to what paper type would be selected on the printer ... It tells me paper size and type are not the same .. there for I can’t seem to make any legit stencils .. would u by chance know what I can do for that ?
only the ipad with the 12,9 screen any other brand or size or PC or Adroid wont work ... and be careful only the black ipad ... white ipad make trouble from time to time ...
I have an ET4760 and I'm using GIMP. I've only been able to get my printer to print tattoo patterns like 3 times using premium tracing paper, it keeps telling me its not the same paper as the setting. It will print on regular paper, but not the tracing paper. Any suggestions zas to what the problem is?
@@inktensive1584 I have the inkjet stencil ink, but what’s the difference between inkjet stencil paper and the premium tracing paper I’m using? It’s worked a few times is it just the settings on the printer that’s the problem?
Yes any epson ecotank will work, you can look up stencil ink and couple brands will pop up for printer. A popular one that everyone is familiar with is stencil inkjet, you pour this in every color tank evenly. You have to buy the spray with it, cause it only works with this ink to stick onto your skin. I tried stencil stuff and it doesnt work.
You have to fill the black tank, that is where the printer takes the ink, but you have to fill the other ones just a little bit so the printer doesnt give you the error “out of ink”
John Ritchie Umali Hernandez any epson model that has Eco tank can be used, the ink is called stencil inkjet , you fill all the tanks up with just this ink evenly
I wish you explained what paper to get and what stencil ink to use and how to fill up the ink
That's like the whole video missing. Lol
Literally what I’m stuck with my printer won’t do it
@@ameliahiggs5483 I was stuck to but I’ve found that ink jet do stencil paper at the size of 8.5in x 11in, the ink I use in mine is also the ink jet printer stencil ink (quite expensive) 2 bottles should fill all the eco tanks. And a little trick is empty the refill bottles that come with the printer and refill it with the stencil ink, makes a lot faster. Hopes this helps!
the point and magic is using the ipad. lmao
@@11DAVIDELEVEN explain???
For anyone asking:
Printer: Epson ecotank 2750
Ink: inkjet stencil or eco stencils printer ink
Paper: pacon tracing paper
If only the ink wasn't so expensive I think id already own a similar setup!
Is there any difference in the epson ecotank 2760 ? Will it work the same
Can you use an iPhone12 instead of ipas
Tysm, without this comment this is literally just a video on how to use a printer..
I use this, but the stencil not work. Why?
Some how my one is printing very light can’t work with it please help
Nice video checking in from Perris California
I have regale paper how do I make it print on that kind of paper
What paper did you use..?thanks
Can you use an iphone12 instead of a ipad
How did you set up the printer
Can I use this printer Epson EcoTank L130 Single Function Ink Tank Printer
What paper?
Damn thats dope!
What’s ur paper setting mine prints out blank
did fou find a fix?
I also have an Epson M1120 printer. but I still haven't found paper to be able to print tattoos. Can you please tell me where I can find this special tattoo paper? if it exists on amazon or something
Inkjet stencil paper
I can i keep the black for normal printing purposes and fill the colors tanks with the stencil ink for tattoo stencils?
Do you fill all 3 colours with the stencil ink.????
does it work the same with hp envy pro 6400 ?
Does anyone know if a Epson 2550 would work? I got one and mine keep printing out red
What paper is that?
Does it jam the stencil paper often? ..or is it a smooth process?
TattoosByBonek yes at times it does jam up, i i think because the paper is too thin and the printer pulls it in fast. I can print a good amount of stencils before i have this issue.
Great 👍🏽
Thank you
Hi there, what kind of paper are you using? I tried tracing paper and that was a huge mistake.
Yea mines just jammed
What kind of epson os this? Eco tank l3110?
Any eco tank from epson should work
U only used the white sheet of the stencil paper?
hey did you find an answer yet im having the same problem
Paper name?
Hey which iPad do you use ? I’m currently looking for both an iPad and printer combo don’t have either one yet
app is name please
what kind of paper did you use?
Use regular copy paper and Stencil Stuff
will this work on an Epson WorkForce 645 all in one?
No , any epson eco tank will work, no ink cartridges. Because you have to manually inject the ink into that tanks yourself
has anyone ran normal gentian violet in the eco tanks for stencils?
I red about some dude claiming that the ink they use for this kind of stencil is just gential violet. But some say gential violet has larger pigment and may get stuck in the print heads. Gential violet is very cheap unlike this inkjet stencil ink costs so much
I’ve read people have used genetian Violet and diluted with a little alcohol
what is that paper ? thanks!
Put ink in all only halfway cause if you print from a colour picture the printer won’t be able to get the contrast of the drawing best to fill up the black but only need halfway in the colour tanks 😁
Bruh younger then me
What kind of ink and paper is used?
Stencil ink jet ink , they also have a combo package where the paper comes with it. Its just tracing paper you can also buy at any local art store. Ive tried printing it on regular printing paper and that works too.
@@memetspt7752 how strong is stencil?easy wipes off?
Kimt kyahe
Noticed something 1:31
Do not invest in this, it's trash. Your better off printing out a lined version, size it and then run it through a standard thermal machine, especially for line work, there's no point in wasting this much money on a line drawing. Where the real problem lies is how the printed stencil works with what it's intended for, gradient photos. The dark areas blend into the greyshade and dilutes the detail; while you can what's shaded and what's not, the definition is pretty much all blended together and actually makes it harder to read then a hand drawn stencil map. Learn how to make a stencil by hand like a real professional and that's all you'll ever need, there's no shortcuts for good tattoos.
Making a stencil by hand is totally unreasonable if it's for something like an entire back-piece or full-body piece. I'm not about to spend I don't even know how much time to give myself carpal tunnel drawing the same thing three times over to make a stencil by hand for someone's whole back and I don't think that makes me any less "real" of a professional or my tattoos any less "good," cheers.
I just hooked mine up and it prints the maintenance copies just fine but everyone I try to print my design it comes out blank! Help! Anyone have this issue?
Everytime*
@@click1click1click same thing here, it's very light, did you find a fix to this?
Setting of the printer pls ...do you print b&w or colour ...what paper type you mark in settings(normal paper,photopaper etc ...and what stenci solution you're using )
Why would you need color for an outline of a sketch? 💀 it’s obviously good with the default color (B&W) & im pretty sure normal paper is fine dawg 💀
I have it and its a nightmare! the inkjet stencils clogged one of the nozzles, in order to run a power clean, your ink tanks have to be at least half ways! if not you run the risk of damaging the printer permanently, that ink bottle is only 4oz not to mention the price, so I ran the power clean it almost emptied out my tanks, so now I have to purchase more ink that's over $160 with shipping and handling. The printer was over $340 with tax and shipping and handling I put 2 ink bottle, each over $160 so now im a little over $660 and its still giving me printing quality problems. I don't know if this ink voids the warranty of the printer, but its not really worth it in my opinion, not to mention that the stencils are weak and will disappear with just a few wipes.
make sure to use the recommended paper because it will not work with other types of paper and its only $25 dollars for 500 pages which you will ony use about 300 to 350 pages because the rest will go to s!i#!
joe G what is the recommended paper?
Tracing paper
Same problem here man i regret that i bought this shits
@@ismailxatzisouleiman8854 they make it look so good and easy in the videos don’t they. I’ve had the same problem when I’ve been able to even print out a pattern, very light and doesn’t transfer to the skin very well
Just what I was looking for. Thanks for the video!
You Happy with that Printer(what model# is it)? Would you get a different one 🤔? THANKS👍
Can I ask you what paper u use? I tried some of tatoopapers but the quality on skin is terrible.
Zum Drucker mal meine Erfahrung. Ich habe den epson et 2751 am 9.12.2021 gekauft und mit inkjet stencil fluid befüllt. Dieses liquid ist nicht gerade billig im Gegenteil es kostet richtig Geld. Ich habe das liquid eingefüllt und habe ein paar Test Seiten gedruckt. Alles war super.
Die Vorlagen mit denen ich gearbeitet hatte waren bei einer Skala von 1-10 vom Ausdruck eine 8
Von der Intensität eher eine 4
Beim auftragen lösen sich nicht viele Pigmente des liquids.
Beim arbeiten ist es gefährlich zu oft zu wischen. Da das stencil schnell verschwindet.
Der Drucker druckt feine Sachen auch gut aus. Nur ist es gefährlich das Gerät mal eine Weile nicht zu benutzen. Was bei mir nun der Fall ist. Wir haben den 26.04.2022 und der druckkopf ist bei mir durch.
Das fluid trocknet wohl stark an und der Drucker macht seine arbeite nicht mehr ordentlich. Bis auf garnicht! Ich hatte nämlich dieses Problem gehabt das ich drei vorlagen ausdrucken wollte und schon bei der zweiten war das stencil total blass und nicht vollständig bedruckt.
Habe mit dem Epson Support gesprochen und muss ihn heute einsenden.
Ob ich danach einen neuen druckkopf auf Garantie eingebaut bekomme bleibt fraglich.
Da ich nicht die original epson Tinte befüllt habe wird das wohl ein Problem werden. Mal schauen wie kulant die sind.
Aber ich ahne nichts gutes.
Obwohl das stencil fluid für den Drucker „angeblich“ geeignet ist würde ich ihn nicht wieder damit befüllen.
Ich habe mir nun den thermo Drucker von Brother-PJ773 gekauft und muss sagen das ich extrem zufrieden bin.
Meine Meinung zum Gerät.
Wenn das Teil unter regelmäßigem Gebraucht genutzt wird dann könnte es sein das man vllt diese Probleme umgehen kann.
Aber kann es nicht genau beurteilen da er ja nach einer Standzeit von vllt 2wochen schon aufgegeben hat. 😂
Wer zu viel Geld hat und nicht weiß was er damit anstellen soll. Der soll sich den Drucker für aktuell ca 250-280€ kaufen
Dazu noch das liquid für irgendwas mit 200€ oder als set evtl und probiert es selbst.
Ich bin garnicht begeistert von diesem Gerät und rate euch allen lieber einen thermo Drucker zu benutzen.
Hi, thanks for your video!
I have one question Left now.. Is it possible to swap the stencil ink for regular ink?
I want to use my Epson printer for stencils and for normal colour prints
Nope, you shouldn't as the other ink is toxic for human, you could never go back to stencil ink for tattoos
Can you put inkjet in any printer and it will make stencils?
Info on the printer n how to get the ink
My inkjet printer won’t even print any ink .. nothing at all
did you find a solution?
Haven’t even watched the rest of the video yet, just wanna say absolutely beautiful artwork
So basically you explain how to print from ipad it has nothing to do with tattoos
I want to get one but I mean beats the purpose I need it for I don’t want to trace I always hand trace I want something that I don’t trace and just prints
Can tattoo transfer ink be applied to epson l130 printer?
What ink did you used? I have the epson xp-4105 and the ink runs out fast
i’m new to this tattoo stuff , so can you use a regular printer to print images you want to make into a stencil ?
No..you need those type of new printers with the eco tank , that way you can fill it up with stencil ink it’s very easy but these printers are around $200-$300
Does the ink dry in the tank say if it’s not used often. I’m a beginner and learning I don’t want the ink to dry in the reservoir if I’m not using it much
@@youngz9163 You have to make one print a week to make sure that the injectors are not getting blocked from dry ink, the printerheats get destroyed too because of dry ink because the wet ink cools them down in the printing process. Hope this explanation will help 😉.
@@Fosnwa bro i couldn’t find stencil ink, what it looks like?
@@ayehuasca it’s blue
How do I add stencil ink if i already have printer ink in there? Do i have to get new catridges?
$$$
I don’t have a iPad can I use my iPhone ??? And how do u adjust the paper size and why does the picture for the stencil come out small when I adjusted it big it’s actually very frustrating to get it the size I need it to be on stencil paper
ok but how you going to transfer the printed photo to the skin without you have to do it with hand drawing?
What are the settings on the printer for paper size and type? Or is it default settings?
You download the app for this printer, i have it on my ipad and it prints from there, you can print any size. I havent used the printer to scan or copy a picture to print a stencil
@@memetspt7752 Do you have problem with this printer at all? Im thinking of getting one, but hearing some issues with it from others.
is any kind of epson econtank printer may work on for doing stensil works?
What paper do you use. Thank you Big D
parchment
Its like tracing paper you can buy on amazon , inkjet stencil paper
I have the eco tank. I set it up to print stencils by filling all the ink tanks with stencil ink. I print on black and white and turned the saturation up all the way. I use pacon transfer paper and the stencil doesn’t transfer good enough to use. Its very faded and weak. I use stencil stuff to apply. I had to resort back to my thermal printer. Smh
Why do you sound like Halsey😢😢im in love with your voice❤
Would you know why my epson ET-4700 prints fine from my laptop but not my ipad pro? I need help
what paper is that bro?!
Its like tracing paper, you can buy the paper pack on amazon , inkjet paper
Wow what’s ya settings
Shout out to the OG’s! Love the bird in the middle of the design
Speak loudly
Is Any type of printer ok to be used??
What kinda printer is that
Hey guys and gals, I’m using inkjet stencil ink and good stencil paper for this, but we keep getting head issues on the printer, eco tank 2710 - anyone having similar issues ? Been trying to find a thread of comments to get some advise we do a full clean
I am on my 5th printer because the ink drys the printer heads!
It wasn’t helpful at all, rly
That resize app and the ipad is what i need
Is this iPad 7 generation Right
And what ink did u put in there?
Rae Rios inkjet stencil
@@memetspt7752 do you have to add them to all the tanks ? What if I still want black available
Wich printer is this? Et 2600,et2550...?
Krisztián this is a ET-2750, any epson ecotank will work
only with this printer u can do stencils with ?
Hi sir, im your subscriber from Philippines sir
Are you using stencil ink on the printer??
What I pad is that one
What paper do you use
so do you apply that printed stencil directly to the skin with the ointment? like does the ink from the printer transfer to the skin?
Everett yes the stencil ink pack comes with their own spray bottle, once you apply it on the skin you can put down the printed paper on top. Fyi i tried stencil stuff and it doesnt work good
@@memetspt7752 so the printer ink never gets into your skin, only the stencil leaves the mark?
@@crystrezerex2life it's not regular printer ink, it's liquid stencil ink specifically for tattoos so it's safe for the skin
@@amandamacdonald7288 my question was If I could use the stencil paper and print the image on it through a regular printer.?
Francisco vanen no
I’ve bought everything ink jet stencil ink with spray epson et2760 printer my pictures are printing out super light and it’s not being transferred to the skin what is the solution
Quincy Atkinson are you adjusting the darkness on the computer or ipad?
Meme Tspt yea I did but it’s not transferring to the skin after one wipe the stencil is gone
Try to mix a little bit of alchool and liquid transfer and put it on the skin
did you find a way to make it print less light?
Hi I have a epson 2720 and I was curious as to what paper type would be selected on the printer ... It tells me paper size and type are not the same .. there for I can’t seem to make any legit stencils .. would u by chance know what I can do for that ?
I have the same problem with my 4760 eco printer
do you have any solution yet? i am searching for an answer right now.
@@davidbecker4534 do you have any solution yet? i am searching for an answer right now.
I need help to. Same problem
Hello do you need a iPad to use it with the printer or can you use a computer ?
Come on dude. Common sense pls
only the ipad with the 12,9 screen any other brand or size or PC or Adroid wont work ... and be careful only the black ipad ... white ipad make trouble from time to time ...
I have an ET4760 and I'm using GIMP. I've only been able to get my printer to print tattoo patterns like 3 times using premium tracing paper, it keeps telling me its not the same paper as the setting. It will print on regular paper, but not the tracing paper. Any suggestions zas to what the problem is?
Use inkjet stencil ink and paper other wise it will not work.
Forgot the stencil prep as well
@@inktensive1584 I have the inkjet stencil ink, but what’s the difference between inkjet stencil paper and the premium tracing paper I’m using? It’s worked a few times is it just the settings on the printer that’s the problem?
@@davidbecker4534 found out something? I got the same problem
Hi there how do you get the printer to print with this ink?
Wondering the same thing, bought the printer and ink and it's blank
Will a Epson Ecotank L120 work and is there any other ink that I could use?
Any eco tank should work fine. However you need a specific ink for the stencil to stick to the skin. Just search for Inkjet Tattoo stencil
Yes any epson ecotank will work, you can look up stencil ink and couple brands will pop up for printer. A popular one that everyone is familiar with is stencil inkjet, you pour this in every color tank evenly. You have to buy the spray with it, cause it only works with this ink to stick onto your skin. I tried stencil stuff and it doesnt work.
What model? Or is it any epson?
Marjorie Forgues any epson eco tank will work even if its older model
this machine is A3 too?
Jean Carlos i dont know what A3 is
Do you have to put stencil ink in all colour tabs or just the black tab ?
She put it in all of them. Other videos show the same.
You have to fill the black tank, that is where the printer takes the ink, but you have to fill the other ones just a little bit so the printer doesnt give you the error “out of ink”
What type of ink eco printer needs to have a stencil for tattooing? A
John Ritchie Umali Hernandez any epson model that has Eco tank can be used, the ink is called stencil inkjet , you fill all the tanks up with just this ink evenly
I’m looking to buy an epson work force 2760 printer.. will it do the job like this? Sorry new to this .
Any Epson Eco printer will work.
What paper and what ink do I need I just bought a Epson WF-2850
Does this printer print like a portrait or like a basic printer with lines
Williams Batres- 503 Tekkers if you By The Stencil ink Buy The Combo It Comes with the paper
Royal Tattoo it Prints like a portrait
I found the et-2760 for cheaper is tht still a good one to purchace?
Rae Rios any eco tank printer yes
Did u get it if so how does it work
I don’t think that was safe to put on skin and tattoo
Yes its safe just like the thermofax tracing paper