Common Mechanic Mistakes Call 01274 640028
Вставка
- Опубліковано 27 вер 2024
- This video is comprised of just a few of the mistakes caused by mechanics that we hear about daily l, so just a small reminder!Please contact us on 01274 640028 for more enquiries
Its about time!! To see genuine and honest garage helping us people who don't have a clue and it doesn't cost for advice. Well done West Yorkshire Engine's.
He gives that impression, dont trust him with money or your vehicle, Google Des Marples
This geezer has got no clue what hes talking about!!!!
This guy doesnt have a clue what hes talking about caroline.
Tip and Trick for others about the same seal.
what can also be done is this and its also successful,
I cut the flat side out of a thin 2 litter plastic milk container just a bit larger then the seal and longer (4") so as to be tab (handle). Place the o-ring in position and lube up (I generally don't use rtv on o-rings especially around oil/coolant galleries but its your choice)
RTV the housings as per usual and the plastic tab, place plastic tab over the sharp edge and the oil suction hole install the housing, seal should glide over the hole with no chance of cutting
when close to home say with a mm or 2 pull the plastic out making sure all the plastic tab comes away intact.
I use this method Not saying its right or wrong but it works for me.
Very helpful...Des ur a legend...from watching ur video's I had the confidence to do a basic service on my new (2nd hand) D40...I overfilled the oil cas I didn't take into account what was left after draining! But now know what I need to do....all thanks to these vid's. Good job. Jon M South Africa
Great stuff! Thanks for sharing all that info, mate! I just wish you were located closer!
Cheers,
Mark (from Germany)
Thanks for the heads up about oil pressure. You are a champion
great tips mate and very helpful not many would give free advice like that , i actualy cut an o-ring just like that, but i did notice it was a tight fit etc so i removed it just to check and learnt the same things.
i did the same using rtv as i was worried it would not perfectly seal and a dab of super glue so the o- rings dont fall out when assembling, horrible design really , maybe im too much of a perfectionist or stress monkey, hard to tell somedays.
I'm glad I found you on UA-cam. Love from Sweden.
Thank you thanks for watching
West yorkshire engine services can you please answer my comments so i can tell you how incorrect you are!!!!
What is the correct way to install th jet squiter from oil pump?
hit it with a hammer and some oil
This is very helpful. I'm not getting oil to the head in my D40 and the light is on
5:05. Why would turning the engine by hand make the timing to go out but not by turning with the starter?
Ye why?.
I would assume it is because the oil pump would come on
As he said it, I said what !, its a tensioner to take up the chains slack & nothing more.
Also as Dean said never use RTV on O Rings !
@@gegwen7440 There isn't a singe manufacturer that recommends RTV in oil systems, None, the seal is designed to work without the rtv, the original procedure is to remove the sump, assemble the chain cover with pump then the sump goes in.
I wish to join you guys I'm interested in automotive engineering 🇻🇺🇻🇺
Morning, thank you again for the information, I have a problem on my D40 yd25, i've done an engine rebuild and it have a crank position sensor issue and every the seonsor in connected the engine will not start but runs without it.ANY Ideas😊😊
Wonder if it's worth cutting the dowels down a bit to help fitting.
There isn't a singe manufacturer that recommends RTV in oil systems, None, the seal is designed to work without the rtv, the original procedure is to remove the sump, assemble the chain cover with pump then the sump goes in.
I bought a Nissan Navara and the oil lamp started burning every time, is it possible that the pump is not working or something else please help
Is there a particular timing chain upgrade kit you can recommend??
Thank you sir im alway watch your ticnik repair nissan common problem thank very a lot
the mechanic say I need a new engine I have the same oil pressure problem and I bought a new oil pump and it doesn't work
Are you actually telling people to turn the engine over with the starter motor instead of by hand!!!! Those tensioners will either have a spring inside them or be ratcheted so therell be no issue in turning by hand, how you think your car manages when it first starts with no oil pressure????
Youre saying use the starter i assume because it will give oil pressure to the tensioners? How will it when the oil pumps not even on the engine?
I think this guy knows what he is doing. He wouldn't give bad advice he does this day in day out with no problems
Tony Garlingewarren well he does and he is. Ive watched all of his vids just for comedy value. The guy hasnt got a clue.
Great informative video
Thanks buddy 😁
You guys are awesome!
Advice on what would cause a reluctance to start on a D40?
Chain or suction control valve or lift pump for starter
А вы что нибудь знаете про проблемы с вакуумный насос на этом двигателе?
Thats a tough line of work and hard on your body. Lots of chemicals. Take care.
Boss please i need your help . there's a noise in my engine and the oil light is also off. and I can see the oil is also pumping correctly . please what might it be?
Oil pump gone faulty
Really, wow
Please but the car is also moving and pulling good. only the noise of the engine I could hear.
I've serviced the injectors and also changed fuel solenoid and a lot, but still noisy
great tips Des
Big thanks from nz!
thank you
Thanks you. Really good.
Please balance the volume of your intro with your talking as the intro blows your ears out then when you turn it down you can't hear you talk.
I will try mate thank you
Nice fellow and good info.
Hi sir! I have a nissan hard body MP300.And there's a noisy knocking sound in the engine every time that I accelerated it,It sounds like a fuel knock or something.What seems to be the problem of that knocking noise? Thank you and god bless.
Hi Joel could you send a video on are facebook then we can guide you in the right direction Many Thanks Des
ok sir,Thank you so much!
Nice
Nice vid 👍👍 /Sweden
Nous vous prion refait cette vidéo en longue frances
merci
You pulled whole front off to do a chain what a knob
Orrrrr.... maybe it was so he could bring you this excellent content.. so we as viewers can see what he is talking about.. just a thought, but I can’t seem to find your instructional videos... 🤔🤷♂️
Ada ulasan yang dari Indonesia
Pal hello from cold russia the city a Chelyabinsk
Hi pal from Russia thanks for watching cool English
Cara buka oil pump d22
Front
This guy.......knows too much
France
aside from the problem mentioned,what a shitty engine design...........
looks over complicated,cheap components and sure enough prone to fail.
You are dangerous!!!!
Hey love the vids. im from the u.s. and we didnt get the tubro charged motors in our frontiers and pathfinders...i have a 05 pathfinder that i swapped out the motor because old owner didnt have oil in it(multiple rod knock) and it has the vq40de. Was wondering if you have ever worked on the that motor?
Thnx on the tip, just got an 2006 x-trail where the former owner did a chain replacement and the engine warning light is on, and a strange noize when running. It cuts out when it tries running on idle but it runs when i disconnect the cam sensor. Tearing it down tomorrow to check if he realy did replace the parts and if the timing is correct. And also checking the upper tensoner cos i heard that on cheap kits it can fail
A little update, this time mi own mistake. I did not check the oil nozzle spraying the upper chain with oil.This have been blocked and the uper chain now need to change again. Im gonna change the oilpump and clean the pickup tube and gasket at the same time. By that operation i know everything is ok.When your having thins out CHECK THE OIL SQUIRTER. (you shoud make a video on that?)
Excellent advice cheers 👍
Hi, Is it required to drain sump complexly if you suspect your mech has made a 'boo boo' Re, lower seal? And how does one broch the possibility he has? I'm been told it most likably is Injectors!
I’ve just bought a 2007 Navara, with a cracked head. I sourced & good second hand one (yes it was checked) & fitted it. Bought a timing chain upgrade only to find its already been done 😞! Anyway I watch a few of your vids to do the job & they were a great help. Thanks heaps & you’ve gained another subscriber! Cheers from Aus 🇦🇺👍
Hi Jeff, What was the cost of the timing chain upgrade and did it include tensioners etc ?
Handy info how ever you said his mechanic done it wrong yet dident point out anything they had actually done wrong? As seals where not split or cut and in place so what was the issue they done
An Australian guy had split the seal and I was letting people know of the problem you could have if not done properly
Always something interesting.
Can you check the oil pressure to see if it is fine?
great mechanic
Whatever muppet you dont use rtv there just remove the dowels put cover on and then dowels
RTV aside I'm not sure how you'd install the dowels once the cover is in place. They look to be blind holes and a press fit into the lower timing chain cover. Better to just grease the O-rings in the grooves and not try to come straight in line with the dowels when the o-ring is over the edge of the oil pan.
No mention if replacing those 2 oil seal o rings for new......while its opened, i noticed.
Hi Des, Very informative, If you suspect a Misassembled Timing chain upgrade what sort of noises would I get? and would a Oil Pressure Test show any thing? Regards Fred.
Fixing big engines air start 10 tonne fly wheel generator units,' o rings are very important to right fitting .I make my own at times with kit of all sizes and do your's rubber grease, silicone grease, and selant to hold them in .My nissan t31 is a very good suv .Very good your channel has helped everyone. Thanks .
There is a Facebook page about how you have scammed money out of people. Please could you comment on this please?
Is it really mistake if you turn the engine by hand crankcshaft?
No, take no notice of what he said.
Not at all hes full of shit
OMG , I can't believe you can't turn the engine over by hand without it skipping a tooth .
On v6 jaguar engine timing change you pump up oil into tensioner and system
Salut ça va mon x-trail ne demarre pas d'1 coup de cle apres avoir chager mon join de gasket pourquoi svp
Why is it best not to turn over by hand before starting the engine?
Does that pathfinder belong to anyone?
You guys are live savers
Any joy on sending my gears des didn't get a response on email yet
Sorry yes we sorted it give me a bell in the morning will sort tracking number.
draaye
So did George ever get back to you on whether you were right and how he went?
You really think that someone from Aus called him ?
I want to work with you, thank you
Thanks for that buddy 😊