How to Install ExtremeRate Nintendo Switch Replacement Shell with Joy Con Installation Guide
Вставка
- Опубліковано 18 вер 2024
- UPDATE 2:
We uploaded the buttons installation video for JoyCons: • *ZR Flex Upside-down i...
Please check this video no matter you bought the whole kit or just the JoyCons shell, you will see how to unplug and plug the flex inside of the JoyCons without damage them.
UPDATE:
We got some complaints about the Y screwdriver, saying that they strip the original screws.
We found 2 reasons about this problem:
1. the original screws are too tide;
2. our Y screwdriver is too small.
Some customers said our screwdriver is just too weak, but we have iFixit Mako kit, it also strip if we don't hold it tide during unscrew. So the main problem is our screwdriver is too small for us to grab it tide.
Solution 1: push the screwdriver hard when you unscrew, and do it slow. Just like: push, unscrew, push, unscrew....
Solution 2: buy a professional screwdriver kit with Y00 size...
----------------------------------------------------------------------------------------
This video shows you how to replace the NS replacement shell to makes your Nintendo Switch looks completely different with others.
ExtremeRate offer replacement screws with the package, there are variety of screws in the NS console and Joy-con, please read this guide to distinguish them: bit.ly/2FjOFYQ
Purchase links:
Amazon US: amzn.to/3Xv6n0g
Amazon CA: amzn.to/3AJDq6T
Amazon MX: amzn.to/3U6W0gi
Amazon DE: amzn.to/3B6xllt
Amazon UK: amzn.to/3V7ylxA
Amazon FR: amzn.to/3AE3eBx
Amazon IT: amzn.to/3U1XZ5n
Amazon ES: amzn.to/3gDwEsv
Amazon AU: amzn.to/3VnXl3h
Amazon JP: amzn.to/3XzUiqv
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3iggRk4
eBay: ebay.to/3GM6wqk
JoyCons Shells or Back Plate
Amazon US: amzn.to/3gxcBvR
Amazon CA: amzn.to/3AJDqDV
Amazon MX: amzn.to/3U4nfbo
Amazon DE: amzn.to/3uhj6q9
Amazon UK: amzn.to/3V7PSpd
Amazon FR: amzn.to/3AJdDvT
Amazon IT: amzn.to/3Vth4ym
Amazon ES: amzn.to/3EAm5ys
Amazon AU: amzn.to/3U70vHI
Amazon JP: amzn.to/3Ub7K13
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3OAyJ5g
eBay: ebay.to/3EFbDWq
Button Set:
Amazon US: amzn.to/3XsWGPU
Amazon CA: amzn.to/3AJDraX
Amazon MX: amzn.to/3U6lWIV
Amazon DE: amzn.to/3gza2JL
Amazon UK: amzn.to/3V1Wy8m
Amazon FR: amzn.to/3AEIQzZ
Amazon IT: amzn.to/3idkM0M
Amazon ES: amzn.to/3EJ0CDM
Amazon AU: amzn.to/3Ub7D5D
Amazon JP: amzn.to/3F0c4Mi
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3OBg09u
eBay: ebay.to/3GK9aMX
I screwed mine up hahaha. That’s what I get for doing it at 2am. Be careful as you put the ZL/ZR triggers back on to not damage the actual button/switch underneath. Apply vertical pressure only, don’t try to slide it on (I managed to rip the cage off that holds the small black top of the button). Also, extreme caution must be taken when reinstalling the ribbon cables. Ensure you have the proper tweezer tools and line up the connector properly to avoid damage to the ribbon and connectors.
The joycon doesn’t work, but hey, it looks fantastic!
Sorry to hear that, but I think your comment have to be pinup, good advise
Tried again yesterday following my own advice on a new L joycon. Went perfectly, works perfectly, looks great. 👌🏻
They set you up for failure with the screwdrivers they give.
Actually, it’s totally possible to do it without detaching the ribbon cables. I just did mine that way
To anyone doing this mod, please don't just yank those ribbon cables out like in this video. There are latches on each one so they'll just come right out, no force needed. You risk damaging those ribbon cables when you just pull them out like that. Also, disconnecting the battery would be a best practice.. that way if you make a mistake you minimize the risk of shorting something out.
THIS, DEFINITELY THIS!! Just fried both of my joycons’ boards by not disconnecting the batteries.
I noticed that too! Ive taken apart many laptops and phones and already knew this, but many people don’t know and could damage their controllers. Also I didn’t think to remove my battery but it turned out ok. Still best practice though.
I can’t believe they showed that in the video. Completely wrong way to go about it.
i wish i’d seen this before i ripped my ribbon cable on the left joy con.. now i need a replacement ribbon. brilliant 🤦🏻♀️ good job i have spare joy cons 😅
Yup. This. My P4 LED and the S-buttons and sync button on my left jc are now shot.
To anyone replacing your joycon and switch shell, do yourself a favor and get a headlamp. It will light up the screws you are working on and make it A LOT easier to take apart your switch and not strip your screws.
Something so satisfying about these kind of mods. It's like, after you're done, you don't just have A switch, it becomes YOUR switch, and i like that :)
thank you! :)
exactly! haha beautiful feeling. im so scared to do this but i might just give it a try!
@@ohwow290 Same
Exactly! 😁
The backplate set up seems sooooooo easy just the joy con part is what scares me .. I'm getting mine tomorrow! praying everything works out!
Please check this video for Joy-cons ua-cam.com/video/mD7dCvbr5EM/v-deo.html
You should be fine just be calm by now you've probably installed yours but just tryna help people out
That’s why I am gonna use my old ones where the case is broken
howd it go?
It should have been easy but one of my screws was in ridiculously tight so it stripped. It was on one of the sides where the joy cons go. We ended up having to drill through the screw. Unfortunately it’s impossible to put a screw there now but at least the system holds together. Not the fault of this manufacturer at all. It’s Nintendo’s fault for screwing it in so damn tight!
For anyone considering/currently doing this, I'd advise not to detach the ribbon cables, it's possible to do it without detaching, just makes it more inconvenient for sure. One of them clicks back in place just fine, the other is very finicky, and falls out of place easily (At least in my experience). Overall though I definitely recommend doing this, I did the wood grain and it looks so much better than the stock neon red/blue.
I got the Classic SNES one coming and am nervous. Take it in stages I guess. Wood grain does look good though.
@@lildagnamet8760 It really is pretty simple once you get the hang of it, just follow the guide carefully and don't do anything you aren't sure of, and it'll go fine. Was nervous to do it too, but love how it turned out.
easy to follow video! would be easier if the new shell was a vibrant color to see better what is being shown. AND thank you to everyone who taught me how to undo the ribbon cables in the comment section 🤘🏼
Just did this case for my kid's Switch.. We made a project of it... Absolutely LOVE the texture of it... Now I want one for mine...
Thank you! :)
I'm eagerly waiting for my joycon shells to come next week, this will definitely be a challenging project, but well worth it and since there are currently three switches in the house I will easily be able to tell which one is mine
Good for you! Please follow this updated instruction video, it will makes the installation a bit easier ua-cam.com/video/lcoRQyX-Ir8/v-deo.html
It took two hours but I did one of the joycons without screwing it up!! I gotta do the other one now though haha. thanks extremerate!!
PS - next time you do a demo, maybe don’t use a shell that’s black on the inside.. some of the stuff was super hard to see
That's great!!! And thanks for your valuable suggestion! :D
Followed this tutorial and I totally did it, I’m a complete newb when it comes to stuff like this but I took my time and now I’ve got a custom park which work perfectly fine
Congrats!! :D
I'm happy with my new ExtremeRate Super NES shell however I would recommend that anyone who plans on performing the procedure use tweezers on the ribbon cables and most definitely lift up the latches on the ribbon connectors, in this video, specifically the Left Joy-Con the cables are just pulled out of their connectors. I would also recommend a more detailed instruction with a narrator. I'm trying to be helpful not too critical of this video because it was a quite difficult procedure.
Thank you, we found that we will not need to take off the ribbon during the installation, we are making new instruction video and will upload soon, thanks again!
@@ExtremeRate If that's the case you should also be updating the description of the item on Amazon if the ribbon cables don't need to be removed.
And by the looks of things, 2 years later, no updated video...
@@moonblitz9923 This is the updated video bro ua-cam.com/video/o8QPB2uTbHk/v-deo.html
@@ExtremeRate Since this video didn't show that there were latches that needed to be lifted up on the ribbon connectors, I broke one of the connectors on the motherboard trying to shove it back in without the latch lifted.
@@carsonwalker567 Same
So I ordered a red backplate for my switch a while ago from you guys and I love it, it looks so much better than the original one and I get to have a red console to my collection all I need now is to get the red joycon shells
Thank you, the red joycon shells www.amazon.com/dp/B07MP3BMHT
I want this but im to scared to screw up my switch
You should install it very carefully, especially for the joycon. The console is very easy, you can try it first :)
@Logic i think etsy sells them but more expensive, i think it's worth a try? you can always buy new joycons
Its eazy
Cost me an extra $40 cause the locking tab on one of the left controllers ribbon cable broke by following your instructions. Sick 👍 Gotta go buy a new joycon now
I just replaced my shell with a SNES one. Here is my feedback.
1. Looks great.
2. In this video, the ribbon cables are just pulled out. Fortunately I have done enough of this type of thing to know you pull up the little latch to release the cable first to avoid damage.
3. I did the right Joy Con without watching the video after doing the left one. I did not realise how much more complicated the right was :) But I managed it.
4. My one BIG mistake... trying to re-attach a screw in the Joy Con that was too long... it burrows into the front of the new Joy Con shell making a small hole before I realised :(
5. I lost a spring on the R button :) Fortunately eXtremeRate give LOADS of spares
6. 2 of the existing screws got bored out and could not be removed. So I had to pull out the drill and a little tool I have for getting out screws where the head is busted. Again, fortunately eXtremeRate give loads of spare parts meaning it was easily replaced.
My one big criticism of the eXtremeRate kit, my only criticism in fact is the screwdriver. In this kit I got a screwdriver where you swap the heads. This made the process lengthy and annoying PLUS it is not magnetised. The screws are so small that a magnetised screwdriver head would have been awesome. I mean, I managed, but that would have made life easier.
Other than that, great kit with the screwdriver being my only gripe. This video has flaws but gives you enough to do the job. Thanks eXtremeRate :)
What screw extractor do you have? Started on the project tonight and stripped the LAST screen section screw 🙃
@@NPCLiam Its always the last :) I use this kit. The smallest head is just right for the Switch screws.
I don't know your location but this is from the UK. Should give you an idea of what to look for though. This is an Amazon affiliate link btw.
amzn.to/3TgRvzy
@@TootXB Oh awesome, I just picked it up. Thanks for the recommendation!
I call bull. My screwdrivers that came with my shell couldn’t unscrew anything.
Is it too big?
ExtremeRate yeah, they ended up being too big. I’m just gonna return my case for a refund.
Yes
@@DoorMatt4574 the + or Y one?
The Y one
This is gonna be long.
My thoughts on the finished joycons: I brought the yellow ones and they have a very nice soft touch to them. I am very happy with the finished product and it looks like what i ordered.
The shell: As stated above they have a very nice feel to them and they look as if they came from nintendo themself.
The equipment included. I brought mmysel an extra set of tools as many reviews say they pack a bad screwdriver and bad screws. I was quite surprised as when i unpacked it i found they now include a better screwdriver. I still used my own ones on the first joycon however i stripped my first screw when putting it back together. I used then managed to get it out as i had a bigger Y screwdriver. I the put in he replacement screws for the outside of the shell. For the second joycon i used the extreme rate screwdriver and had no problems.
Final thoughts. I would order this again however if you are buying this i would still recommend you buy a set of nintendo screwdrivers as they come with useful stuff like tweezers and plastic tab things you can use to get the battery out.
5/5 stars.
Thank you! Yes we replaced the screwdrivers for the new stocks!
I purchased this from Amazon and just tried installing it. INSTANT REGRET. Wish I had read the comments about buying a special toolkit before trying it myself because I just stripped two screws in my left joycon. DO NOT USE the tools they provide. Now I have to spend 80$ for new joycons.... trash. What a great way to ruin what could have been an awesome product. And don't tell me to read a stupid wikihow on how to remove stripped screws.
We are sorry about that, could you please contact our customer service via email to service@gamingcobra.com, we will work out a solution for you to meet your satisfaction, thank you.
4 years later and they're still bad
I highly recommend getting a "Sharden" 122 piece screwdriver set prior to installing your switch/joycon shell kit. My light lavender/pink switch dealie is looking way cute thanks to this tutorial ✨
Thanks for your info, do you have the link?
Just finished the joycon install. It wasnt difficult but you have to take your time. I stripped one of the Y screws when I finished one joycon and my left trigger would not work, fortunately it was a botton screw and managed to remove the other Y screws and I could poke a screw driver in and re align the trigger. Phew...
I HIGHLY RECOMMEND once you have the Y screws out just bin them and use the Philip screw replacements you get with the pack.
All sorted though after 3 hours!
thanks for feedback!
@@ExtremeRate doing my install right now, I ended up just getting the joy cons first but I love it so I also am getting the full set of this Wednesday for the switch and other controllers. Awesome product!
@@jimRaynor6 Thank you! :)
@@jimRaynor6 Please check the updated guide for the installation ua-cam.com/video/lcoRQyX-Ir8/v-deo.html ;-)
followed your instructions and the ribbon cable broke. thanks 👍🏻 now got to fork out an extra £45 for a new joy con. you really need to update this video and correct the mistakes you’re showing that are causing people to break their joy cons!
Hi Extremerate,
I have bought only the joycon shell, and i have followed this video... and everything was perfect
Thanks for your feedback bro! And we are glad that you love our products! :)
@@ExtremeRate Today, i have received the transparent backplate... I think i will put it on tonight :)
@@oAC2No Good luck! Always unscrew the screws carefully! Use the forward force to the tip of the screwdriver when you twist the screws, and do it slowly. And if you have the professional screwdriver kit with different sizes of tips, use them instead of the one comes with the kit!
@@ExtremeRate it's done...
My NS looks like.... amazingly transparent 🥰🥰🥰
Thank you so much for this wonderfull set 🥰🤩
@@oAC2No You are most welcome :D
Worked perfectly for me! Would be even better with higher resolution for the video but very happy with the result! :)
So glad your screwdriver stripped and broke the circuit in my joycon in half just by using basic force to screw it in!
I found that the left joycon was a lot easier than the right. I ended up breaking my right joycon when trying to connect one of the ribbon cables. I bought a whole new joycon, tried again and managed to get past the part I broke the first time, but then finally made it to the end where you have to connect the two ribbon cables to the board and could not connect the one under the battery for the life of me. So what I found to be easier is to connect those two ribbon cables prior to placing the middle black piece that holds the battery. You just have to be extremely careful the entire time. Those tiny little latches that hold the ribbon cables can break easily.
Yes, right joycon is harder than the left one, do it slowly, carefully and gently, and you'd better to use a good tweezers
It's not necessary to remove those, just leave them attached to the PCB
I screwed up my switch and herd the music somewhere else and started to run away as fast as I could and had Vietnam flashbacks
oh....that's so vivid....
Jesus Murphy, Jess.
I got to the very end on my joy con, was putting it back together, everything was great, but then my Minus button wasn’t in right, of all things. I tried to take it apart and stripped the Tri Screw. Wtf are they made out of? lead? I gave up there. At least I got a cool faceplate on back on my dock and switch. Thank god for pro controllers.
So do you mean one of the screw of your left joycon got stripped and you can't take it out the re-position the minus button?
*Warning*
Regarding the little LED rail circuit board with SL/SR . Do NOT tighten too much or else the board will bend and the SL/SR will feel sticky rather than clicky.
I think I may have to replace mine now.
The problem standstill after you lose the screws?
@@ExtremeRate Yes unfortunately. I hope other people don't make the same mistake I did.
@@slump6982 I see, we have the side rails LED tunning kit, maybe you can change it at the same time if you wish: ua-cam.com/video/g0nhYqZk3aY/v-deo.html
Wouldn‘t it be easier to unlatch the ribbon cables before pulling on them? There is a „lever“ on them to unlock. Also usefull for installation i think.
But great you make a video for your customers. Thumbs up!
Thanks!
Just did a clear backplate. Easy as pie, just follow instructions :D
Cool!
I just got this shell and the video was helpful. I'm loving the new shell, thanks!
This video is kinda jumpy and some zoom-ins would be really cool. I don’t mean to complain. I really appreciate you making the video or it would be way harder.
Ripped one of my ribbons this weekend and now waiting on a new one to be delivered to make my joycon useful again. be VERY VERY CAREFUL when pulling/reconnecting these tiny ribbons!
I would love to see a D-pad Left joycon please
Stay tuned!
i bought their light blue set and the screwdrivers in the video are not the ones that came with my set. i ended up stripping one of my screws on the back of my console cus the screwdriver was bad. this process is easy if you have the right screwdrivers. i bought the e durable kit on amazon and now i have (functional) blue joycons!!
We are sorry for the tools but happy with the result! :D
the screws stripped on the back
Please check this instruction www.ifixit.com/Guide/How+to+Remove+a+Stripped+Screw/13213
The screwdriver that was included in the set didn’t unscrew anything. So I’m returning it and buying a skin or something. After seeing all these comments I don’t think it’s worth messing up my switch for!
the quality of the video has to be higher and with greater focus is a recommendation it is a good tutorial but very fast to see the critical details to follow the steps by apart from the quality of the article very good
Thanks for your suggestion! We will improve it in the future videos :)
You guy should also make the famicon,snes,sfam shells for joycons,console and pro controller.
thanks for recommendation, we indeed have SNES style for joucons & console, more designs will comes out later, and the pro controller will comes out in March 2019
Instructions were really easy but in the end, the “minus” button on my left joycon wasn’t working and the joycons didn’t connect together properly. ( One was on player 2 while the other was on player 1 ) .
Switch come here you are maket to a custom switch switch : okey lets go
ok there you are :D
To avoid the issue with messing up the ribbons, I just left them attached and was still able to disassemble everything.
Is there an Indigo/Gamecube style plates you could make? The best one I see is “Light Indigo” but it’s not exactly what i’m looking for
We will think about it!! Thank you!
the same song for 20 minutes?
Yep, got old real quick...
I fell asleep 🤣
Those finger prints on the metal shielding inside will remain until further notice
lol
Thanks for the very clear tutorial
You are most welcome
Pro gamer move, mute the music, cut the speed, and follow along.
12:08 You'll notice there's a cut here
There is a LEVER to hold down the ribbon cable that they gloss over and don't explain.
I removed the middle frame and got the ribbon in and lever down before screwing in the middle frame.
worked real nice awesome vid thanks for the help case looks great
Thank you! :D
Hey ExtremeRate! Thank you for posting this video! I got to work on my joy cons last night and I just wanted to give you an update on how it went. I successfully put in the new buttons on my left joy con, but just as I was about to start working on the right one the Y-shaped drill bit broke. However, I didn’t realize it was broken, and I ended up stripping three of the screws. How can I fix that? Or perhaps is there any way I can send my joy con over to you to have you look at it personally? This is a really amazing product, and I look forward to completing the uniformity of my console :)
Hello, we are sorry about the stripped screw issue. Please try to refer to this link: translate.google.com/translate?hl=&sl=auto&tl=en&u=https%3A%2F%2Fnew.qq.com%2Fomn%2F20190813%2F20190813A0NMRP00.html Please keep us update the situation, thanks
Hey guys! So I’m just now getting started with that right joy con project. I got new screwdrivers and special tweezers, but it turns out I didn’t need the tweezers to get the stripped screws! In fact, I don’t even think the screws were stripped to begin with (but I will replace them cuz they’re garbage now). The new screwdriver was able to get them out easily. Now the project can begin!
@@briangruenewald7536 Good to know that!! Congrats!!! What screwdrivers you got and how did you take the stripped screws out?
Couldn't you have talked instead of this obnoxious music? :/
OR PUT INSTRUCTIONS IN THE PACKAGE!
If there is an instruction it will looks just like a book :P Any way thanks for your suggestion!
@@ExtremeRate I'd prefer a book more than nothing. Also your screwdrivers you send are very cheaply made. :/
@@Augustusir A book will raise the shipping cost of the items, and a professional tool set will raise the cost too, but we want our products are affordable for every gamers... we have a tool kit has better performance www.amazon.com/dp/B06Y661P8J/ and TronicFix made another installation vid for this remap kit, he is a pro ua-cam.com/video/lYmnPWnzwNU/v-deo.html
@@ExtremeRate it's already $40. I'd have gladly spent $60 for an instruction booklet and proper screwdrivers. :/
@@Augustusir lol no you won't
hi there, bought one of your case the SNES, and my joy con on the right isn't charging any tips what could be wrong????
Please check the flexes of the slide part if they were upside-down
our savior
lol
They used the orange screwdriver to remove the tri-wing screws on the backplate in the video...but in my kit the black screwdriver was the tri-wing. Realized this too late, ended up with a stripped screw, unable to complete this. Sucks :(
We are sorry to know that. Could you please let us know your order number?
Can you just still use the original Joy-Con Buttons with the new Shells, or do they not fit?
You can still use the original joycon buttons with the new shells, they fit.
Hello, I really need some help! I ordered my kit and I was so excited to try it out. After seconds I realized that I can’t take out half of the screws, they were so tight, I mean, what am I suppose to do now? I tried to put more pressure into the screws and I managed to get a few out, but not enough to open anything, not the back of the switch nor the joycons at all.....I stopped now, because I’m too afraid that I already broke my screws....I decided to buy a decent package of new screwdrivers to try it out next week again, but I’m so afraid that I already broke some screws and now it’s impossible to open the switch😭😭 Has anyone had the same experience? In other videos opening the switch looks so easy....
I did the console and left joycon last night and now I'm doing the right and I've barely done anything because I can't get the screws out. I broke the Phillips head that came with the shell on accident, but I have another similar one I've been using, but now I think it might be too big.
I frigin love the idea of these so much but there is no way I can trust myself to install smth like this
I saw that two of the foam pieces go in the console shell, but didn't see the other two used. Are they just extras?
Also, these are much higher quality than others on the market like the basstop shells. My first reshell on my Switch back in 2018 was with basstop and both the joycon and console shells sucked, they cracked so easy and didn't fit together properly. The extremerate shells feel much nicer and my daughter and I have reshelled 3 sets of joycons and her Switch with these ones and they really hold up well along with having a more premium feel and fitting together as you would expect. My only complaint was with the SNES joycons I had to order a set of lavender buttons because it came with four dark purple buttons rather than two dark purple and two light purple, but other than that it looks and feels great. She got the joycons shown in this video last year and we just finished the Dark Grey Violet joycon shell replacement and are doing her console shell now (hence how I wound up here asking about the extra foam). Really solid stuff, the material just feels great in your hands.
はーほんとに大変だった、すんごい疲れた。もう二度とやりたくない。
でも見た目がはるかに良くなって最高に満足してる！最悪Joy-Con買いなおすつもりでいたから、それくらいの心持ちで始めたほうがいいね
Nice case i like it i have the golden one
damn I'm dumb, when I tried this I assumed you had to remove the rails on the side 😔 I stripped one of the screws and accidentally pulled the one ribbon cable out of its clip, thankfully I was able to fix it but I stressed way to much over it xD I love the quality of the case tho! only thing is I think I either installed the kickstand incorrectly? or it just feels very stiff and clicks
Bruh how are y’all doing this so easy, my backplate screws won’t come out
Please try to find a professional screwdriver kit with different sizes and types of tips to take them out.
Just stripped out one of the little baby screws. Wish me luck😔
I'm trying this without removing ribbon cables, if I'm going to void my warranty i *DO NOT WANT TO MESS ANYTHING UP!!!*
Some ribbon cables are removal required, please check our update video ua-cam.com/video/lcoRQyX-Ir8/v-deo.html Do all the process gently slowly carefully, then every thing will be fine :D
@@ExtremeRate I did mine without removing any ribbon cables at all! It was a lot harder but I didn't mess up anything and it went fine!
@@SbrigadeSO Technically it can be, just as you said it's much harder. Good work anyway :)
The Y1.5 head that came with is trash. Probably why this video completely skips the two screws on the back.
I assembled it exactly like shown, but when I connect the right Joycon it doesn't think it is connected to the switch like the left one. It still charges and works just fine when they are both disconnected, but I'm confused why it doesn't connect. Can you help.
Please check if all the flex and cables inside the joycon are plugged correctly
I have the same issue right now, did you figure out which cable was loose?
To anyone still using the product today THEY HAVE NOT GIVEN NEW SCREWDRIVERS WITH THE CASE BUY YOUR OWN TOOLS THE ONES THEY GIVE YOU WILL STRIP YOUR SCREWS
That skin remind me to final destination from smash bros ultimate
:D
So i think my screw drivers that came weren’t the proper size or something because it stripped out two of my screws on my switch and now I can’t take the back plate off.
We are sorry to know that. Please follow this link to try to take out the stripped screws: translate.google.com/translate?hl=&sl=auto&tl=en&u=https%3A%2F%2Fnew.qq.com%2Fomn%2F20190813%2F20190813A0NMRP00.html
Where can i buy the NES themed shell? I can't find it anywhere online.
It's out of stock currently, the latest news is will restock at the end of April
you dont pre-install the vent covers? odd...
:P
the ventilation grills that he puts on in the video look like stickers? do they work or could this lead my switch to overheat?
it's the same material as the original, work the same as original too
@@ExtremeRate Oh awesome, it just looked fake in the video
I just got mine today and they did not send the right screwdrivers so I am unable to install it
Sorry, what screwdrivers did you received? And please let me know your order and then we will send the correct screwdriver to you
Damit. Disconnect your batteries as soon as you open it. I short circuited my right joycon and now it's dead. 30 bucks for a refurbished one to use as parts.
We never thought about that!
Can you restock the red one please? That one sold out before I had a chance to buy it 😅
Yes, the stock will be back in 2-3 weeks
My kit didn’t come with screwdrivers and I don’t have any at home. Now I have to spend more money to get screwdrivers.
Hi, we are sorry to know that. Could you please let us know your order number via email to info@extremerate.com with your shipping address and UA-cam name, we will send you the screwdrivers asap.
@@ExtremeRate thank you but I already got some screwdrivers and it was worth it. My switch looks amazing now that it is customized. Thank you!
@@samanthaconway8489 Great!!!
Anyone know what the song is lol?
Are there installers that can do this for you
You might find someone local. I do it for people around me for $40
Oh my god. Did they just pull the ribbon cables out?! 4:49 Is that legit? I always undo the little clasp holding them in.
We have updated video ua-cam.com/video/lcoRQyX-Ir8/v-deo.html
I can't get my home button to stay straight, and the top part of my joycon shell doesn't close properly. :(
I'm getting mine tomorrow, if I fuck up I'll let y'all know.
I fucked up
Just bought this because the front of my switch including the vent guard had cracked in several spots only to find it's a backplate, not a true shell replacement. Negates the point of buying it.
Any tips for a stripped screw? The Y screwdriver is terrible and immediately stripped one of the screws....
Please check this page translate.google.com/translate?hl=&sl=auto&tl=en&u=https%3A%2F%2Fnew.qq.com%2Fomn%2F20190813%2F20190813A0NMRP00.html
what scrredrivers/tips are you using? have a nice selection but nothing will give at all! any pointers welcome plz!
We have the screwdrivers come with the replacement shell!
Help I did this and my controoler connects and charges but it wont register any clicks
I thought the joy cons would be trouble. Had no issues. The back plate of the switch however... the 2 screws on each side in the joy cons rails. Are so tight. I'm just not doing it. I tried with different size screw drivers none work without stripping them. I gave up
:(
Could you make a video on how to apply this to the Nintendo switch dock please
We are planning to make the custom switch dock face plate
Next time please use different colored shells! It's really difficult to see the placement of black parts on the black shells.
Extreme rate can you pls make a video with the nes style.
The installation process are all the same with all style :)
So I should reuse oem screws?? What I learned from using gba off brand shells is that I don't reuse oem screws or risk ruining the shell and stripping them in the process
I did and because of this tutorial it broke my chip I WANT NEW JOY CONS my right joy cons chip broke
Wow that was difficult, nintendo does NOT want you to be able to customize your stuff
Liebe das Gehäuse schon das 2. verbaut mega gut aber warum gibt es noch nicht für den jay con komfortgripp ein Case
So, I tried doing this and it just completely ruined the screws on the back of my switch and don’t know what to do
Please refer to www.ifixit.com/Guide/How+to+Remove+a+Stripped+Screw/13213
Anybody else have any issues getting the screen capture button to feel right in the new shell? I think there's a small amount of padding on the original shell around the button, not dissimilar to the thin padding around the joystick. Also, as mentioned elsewhere, don't just yank the ribbon cables out! If you break the ribbon cable they're easily replaced, but break the latches on the board and you'll need a whole new one.
any chance at repairing it? my friend just did this and we're trying to figure out the chances of repairing it?
it is not necessarily a "repair" per-say as to making sure it is fully seated/in all the way. I was having this issue with my home button on my pro controller.
I’m gonna do this mod to my switch with the green shell,
And i might just put my own graphics on it.
SHOULD i do it?
two back screw stripped cant get it out , any suggestions how 2?
the screwdriver for the back panel doesn't work i think it needs to be a smaller Y screwdriver
We suggest you find a professional screwdriver kit with different sizes of + and Y tips for the installation.
Ciao, io ho un problema con il joy destro, cadendo la switch si sono rotti i supporto interni su cui si avvita la slitta che connette il joy alla nintendo. Qual'è la parte di ricambio da sostituire?
Hi, I have a problem with the right joystick, when the switch fell, the internal support on which the slide that connects the joy to the nintendo is screwed on. What is the spare part to replace?