PC-DMIS Custom Probe Builder | PC-DMIS Tech Tips - CMMXYZ

This Tech Tip from CMMXYZ show you the steps to create a probe component in PC-DMIS if the component is not available in Probe Utility dialogue.
Welcome to another video on Tech Tips from CMMXYZ. Today, let's find out how to create a probe component in PC-DMIS. Custom probe is built when we have a probe component that is not listed in probe description while building a probe in PC-DMIS. For example, if we have a disk stylus of diameter 4 mm with 1 mm, and length 31.5 mm, this stylus is not listed in the probe description. This is when we create a custom probe to complete our probe bit.
To create a probe component, there's an option called custom probe builder utility in PC-DMIS. To access custom probe builder utility, go to Edit, Preferences, Custom Probe Builder Utility. When you select Custom Probe Builder Utility, a pop-up comes up asking if you want to create a new probebuilder.dat file or open an existing one? It is in this file where the information of the created custom probe is saved. Let's select open an existing file.
This takes us to the directory where the existing probebuilder.dat file is located. The path to the directory is C Drive - Programdata - Hexagon - PCDMIS - PCDMIS version. Select the existing probebuilder.dat file, and click on Open. When the probe builder utility dialog box opens, you can find three tabs, CAD components, Component Builder, and Assemble.
Using CAD Component, you can import the CAD file of the component created in CAD the software and use it in the PC-DMIS. Assembly tab, uses the existing components in probe builder and probe.dat file for assembly and saves it in IGES format.
To build a probe in PC-DMIS, we go to Component Builder tab. In Component Builder tab from element type area we can create tips, extension, and polygonal elements. Now, let's create a disk stylus of diameter 4 mm using custom probe builder. First, let's make the cylinder leading to the disk by selecting cylinder option on the tip.
In the drawing, the distance from the stainless end of the stylus to the center of this is 31.5 mm. So the distance from the stainless end to the start of the disk is 31 mm, subtracting the 0.5 mm from the width of the disc. Let's create a cylinder by keying in the diameter, 1 mm, and height, 31 mm. Change the connecting thread to M2.
Now, click on Create to create the cylinder. To create the disk, select the disk option under Tip, and key in the diameter of the disk, 4 mm, and the height, 1 mm. Then click on Create to add the disk. Rename the component and select Save. The conical shape of the stylus is inconsequential as the length of stylus is considered for calibration. However, you can add the cone if you know the dimension of the conical shape. After saving the component, click on OK to complete.
Now, let's open the Probe Utilities to check if the new probe type is created. Open the Probe description list and you can see that our 4 mm disk stylus is created. Select the Probe Tip and add it to complete our probe type. Press OK to save the probe file. You can see that the probe component is added to the probe in PC-DMIS. This was a video on Custom Probe Builder. Thank you for watching the video.
About CMMXYZ
We are North America's foremost independent measurement solutions provider. We sell new and used coordinate measuring machines, provide measuring services, upgrade and repair your systems.
CMMXYZ - Coordinate Measuring Machines - www.cmmxyz.com/
Get the latest on Twitter - / cmmxyz
Follow CMMXYZ on LinkedIn - / cmmxyz
Learn more about CMMXYZ on our blog - blog.cmmxyz.co...
Subscribe to our UA-cam Channel - / cmmxyzvideo