Доброї ночі !!! Питання ::: а чі не простіше зробити змінні прокладки - матриці з різними малюнками в один і той самий корпус матриці ????? ЗДОРОВ'Я УДАЧІ БЛАГОПОЛУЧЧЯ
ні так не вийде, якщо з малюнком складни то треба робити окремий пуаонсой, і робити відтиск з тонкої латуні, або міді, а потім зпаювати з основною блешнею, це задача на майбутнє, треба ще досвіду набратись, я приду до цього згодом
Добрий вечір ! Цілком випадково на очі трапилась сітка з якогось трактомобіляз повітряного фільтра . Ось Вам і прокладка з орнаментом луски поміж матрицею та заготовкою блешні ... ЗДОРОВ'Я УДАЧІ БЛАГОПОЛУЧЧЯ
No clue how you got that to work. Tried that today. Had to bake the caps in my bbq Then the plastic wouldnt mix right and the mold inside was all lumpy Then when i tested a piece of brass it got stuck inside the mold This video makes this look way easier then it is lol
I have a lot of videos on this topic recommendations: 1. The plastic must be heated with a construction fet with hot air 2. the punch should be made on a cone so that the workpiece is easy to get, 3. to have a glossy surface in the middle of the matrix where the bait is formed, for this the punch must be hot, you can then reheat the top layer and clamp it in a vice tightly I hope my advice will be useful to you, I also did not immediately succeed
@@CopperFishLure update.... I have found an awesome alternative!!! JB weld steel stick 2 part epoxy putty I made a little box from a coke can like you did Mixed the jb weld together Packed it in the box Covered the metal die in olive oil and pushed it into the JB weld Pulled it out Let it cure and get nice and hard for an hour And it actually works!!!! Just made my 1st copper lure!!
@@thegreatwhitenorth8754 Hello, instead of plastic crisps you can use reusable plastic polymorph, it becomes soft when you immerse it in water, on the channel there is a new video just made by this method ua-cam.com/video/-OES4Cfa6FI/v-deo.html
@@CopperFishLure ok ill check it out The JB weld steelstick works great Will handle 4000psi so its hard enough Ive already made 50 copper blanks since my last reply
Thanks for watching and your support!
You absolutely nailed this one bro! Nice work!
Thank you :)
Thanks for the ideas.
It's strange that there are so few views here, it should be popular! Greetings from Belarus and keep up the good work!
Amazing work allways works to make your own baits and lures💯👍🏾
Teşekkür ederim emeğinize sağlık gerçekten çok yararlı bi yöntem
Quedaron muy bonitas las cucharitas y muy efectivas gracias por compartir saludos y bendiciones
awesome and thanks for sharing.
Really nice. Wish i would have made a punch n die to cut these out when i worked in a tooling shop.
Do i need this chemicals? Because i dont know what they are and how to use .
Nice 👍👍
Доброго дня, чудова робота! А підкажіть, будь ласка, скільки часу в середньому іде на виготовлення такого пуансону?
Доброго дня, дякую, годин 5 приблизно, чим більше блешня, тим більше часу
I like that you use materials that you have laying around. For the punch, was that an old rail spike?
Hello, the material from which the punch was made was a turning tool
@@CopperFishLure thank you. I think I am going to try to make a punch from a rail spike as I have one in my scrap pile.
Привет Мастеру благодарю за видео саветы Спасиба...,,,
Чудова робота друже 👍👍👍
Дякую
Доброї ночі !!! Питання ::: а чі не простіше зробити змінні прокладки - матриці з різними малюнками в один і той самий корпус матриці ?????
ЗДОРОВ'Я УДАЧІ БЛАГОПОЛУЧЧЯ
ні так не вийде, якщо з малюнком складни то треба робити окремий пуаонсой, і робити відтиск з тонкої латуні, або міді, а потім зпаювати з основною блешнею, це задача на майбутнє, треба ще досвіду набратись, я приду до цього згодом
@@CopperFishLure 👍
Добрий вечір ! Цілком випадково на очі трапилась сітка з якогось трактомобіляз повітряного фільтра . Ось Вам і прокладка з орнаментом луски поміж матрицею та заготовкою блешні ...
ЗДОРОВ'Я УДАЧІ БЛАГОПОЛУЧЧЯ
👍 Хорошая колебалка получилась
"Easy" if you have a work shop 😂 great video all the same.
You don’t need a workshop, you just need a few tools and desire :)
imprinting contours with an aluminum punch will probably work just as well as steel
aluminum is a soft metal, for medium and large spinners you can use Tsam alloy, like this: ua-cam.com/video/_MU-pn9UqsQ/v-deo.html
In Poland this spoon model is called Gnom. What is it called in Ukraine ?
Love it that you use spoons so much, i do too.
SLAVA UKRAINI !
Hello, Glory to the Heroes!
We call a spinner with this shape Storling, many well-known companies have a similar model
What product did you use for silvering ?
Bravo
👍👍
No clue how you got that to work.
Tried that today. Had to bake the caps in my bbq
Then the plastic wouldnt mix right and the mold inside was all lumpy
Then when i tested a piece of brass it got stuck inside the mold
This video makes this look way easier then it is lol
I have a lot of videos on this topic
recommendations:
1. The plastic must be heated with a construction fet with hot air
2. the punch should be made on a cone so that the workpiece is easy to get,
3. to have a glossy surface in the middle of the matrix where the bait is formed, for this the punch must be hot, you can then reheat the top layer and clamp it in a vice tightly
I hope my advice will be useful to you, I also did not immediately succeed
@@CopperFishLure ok. Its def. Not easy thats for sure
I did not heat the metal before putting it in the plastic
I will try again
@@CopperFishLure update....
I have found an awesome alternative!!!
JB weld steel stick
2 part epoxy putty
I made a little box from a coke can like you did
Mixed the jb weld together
Packed it in the box
Covered the metal die in olive oil and pushed it into the JB weld
Pulled it out
Let it cure and get nice and hard for an hour
And it actually works!!!!
Just made my 1st copper lure!!
@@thegreatwhitenorth8754 Hello, instead of plastic crisps you can use reusable plastic polymorph, it becomes soft when you immerse it in water, on the channel there is a new video just made by this method ua-cam.com/video/-OES4Cfa6FI/v-deo.html
@@CopperFishLure ok ill check it out
The JB weld steelstick works great
Will handle 4000psi so its hard enough
Ive already made 50 copper blanks since my last reply
здравствуйте!!короче медь лучше всего работает!!)))
Всё правильно- один делает классные приманки, а другой на них ловит.
life is not long enough.
First.