BIG MISTAKE turned GREAT JOB into UGLY when using sausage caulking! How to seal ACM panels.
Вставка
- Опубліковано 8 жов 2020
- Never do sausage silicone on Aluminum Composite Panels without watching this video. Learn from my HUGE mistake that turned great job into ugly nightmare
- Навчання та стиль
I wanted to say how much I respect you for having the integrity to show your mistake so that we can all learn! Thank you so much and may you be richly blessed!
This same thing absolutely happened to us in the uk, white panels were fine but darker panels got to over 50c and just buckled all of the sealant we had when we returned the next day ! Lessons learned
Massive Respect for owning a mistake and for wanting to fix it. No blame, just owning it. Legend.
Congrats! You´re really professional, I love your work. Thanks for show us yours mistakes and we will try not to repeat. Thank you.
Thank you it has been some time since I caulking I am a ironworker lock 16 and I have been out due to back to back operations and I am trying to rebuild my strength so I can get back to what I love doing you guys did a grate job when you remove the wrap if you use a1/8 inch shem and run it across the wrap and it comes off and no scratches thank you
Thank you,massive respect for your work
I’m really glad to find this video, there aren’t many on UA-cam about how to do sealant joints on metal panel cladding. Thank you and hope you do more videos like this!
Typically the whole acm panel is fabricated differently to where you have spline pieces (which are like little 2" strips of the same material) that slide into a little cleat in the panel on both sides which also has a gasket on them to keep water out but typically a acm system isn't water proof on the outside as it is metal, it condensatez
Man you guys must be true professionals. That caulking job is immaculate. I only do caulking jobs on parking ramps and some drive ways for extra money. Most of our commercial jobs don’t require such perfection but this is interesting to watch. I really like the idea of removing the cover and how you guys did it on the sides. Very cool trick. If I ever come across these panel types I will definitely be applying this technique.
This guy is Absolutely No Professional and there’s definitely Nothing professional about the Caulking Industry As far As Real Caulkers who would never Do the Major Sins that this clueless Wanker is committing Wet Tooling Using Dish Soap? Finger Fucking instead of tooling? This guy is getting away with So much flim flam and Cheating Diluting etc and that film absolutely needs to be pulled off before you caulk and you can tape it after you pull the film off but No Top Gun Real Caulker would ever leave the film cover on and caulk wiping his tool which is way too big all over the place and then having to wet tool and finger fuck after pulling the film since he broke the seal on the caulk. This video is literally everything that you should never ever do for so many reasons and not long ago would get you immediately thrown off the job
Thanks for the video man. Had the same thing happen on a job of mine. I was pissed at my guy that did the caulking. Had him cut out the 4 store front frames he did and told him id show him how to do it right. Caulked it early before it got too hot... the next day it looked worse than he had left it 🤣. Finally figured out I needed to caulk it towards the end of day when it was the hottest. Only problem is you have to haul butt because it skins up fast.
Gracias por compartir este video voy a comenzar un trabajo con los mismos materiales seguiré tus consejos Dios te bendiga a ti y tu familia y tu grupo de trabajo
Thank you for the information, hope it turns out OK for you😊👍
What an awesome craftsman. Thank you for the videos. So you are mounting the aluminum panels on cinder block walls with concrete boards? How thick are the concrete boards? Can you do OSB and concrete boards?
Great work, watching your videos gave me more confidence to fabricate myself.
What’s the sealant you use?
Ey man that's really good finish. Especially on the transitions. You can't see a single tool mark. 🤙
Good info thanks. About the expanded caulking, there is a special tool for grooving tread on tires, kinda like a knife and they have different shapes. You might be able to run it and scoop the excess caulk and leave a nice bead
thanks for the tip!
Am installer Acp sheet alivetion facd Alcon 10 y experience in gulf countries in India contact me
Very skillful man
Muito bom o acabamento perfeito, parabéns.
I was taught to always use backer rod. Every place, and depth at one half the width. By not using rod, you can’t set a consistent depth. That may have added to your problem with your dark panels.
By not using backer rod you can also get a three way bond, which can tear over time
I know even what to say, but Thank you!!
Good job 🎉
Please how do get to learn more of this work, is really in my interest
Awesome tutorial, I'm hanging alucobond panels on the new st jude building in Memphis and this helps out alot. Great video guys 👍
thanks for your comment man! Good luck with your project !
What's the best brand of silicone caulk to use for the panels ?
Wow. What sealant did u use?
Hello. I know this is a long shot as this video is pretty old but… I’m a DIY homeowner that bought a house clad in ACP. I’m adding an extension to the garage and found your other videos regarding the creation and installation of the panels to be very helpful. This summer I’m going to start the process of re-caulking the entire house as it’s 20+ years old and a lot of the joints between panels have failed.
What I’m worried about is getting the old caulk out of the joints. Using a utility knife is going to be physically daunting and probably nearly practically impossible given the sq/ft of the house and the height of the walls (20’+). Is there a special tool for this application or one that you can think of that could be repurposed to do this? How about a chemical solution that could either remove the caulk itself or at least soften it to the point of making the removal easier?
Any and all ideas would be greatly appreciated. Thank you.
The equipments which platform can I get it to buy
you can use a small chunk of acm to quickly score the edge and not worry about scratching or chipping with a knife. Faster, easier.
I like it to use a pice of the same panels to peel it, that's going to make it a lot easier,i don't like to use nife because you will scratch it. Nice job i love it.
I always use a piece of spline as well 👍
Thats why always remove cover plastic acm panels needs to breath and stay without plastic couple days and plus the joints are 3/4 depth is 1" u have to use bakerrod if you did used the bakerrod can expend also and the best caulk is Sika for hot weather .
Hello What thickness of the of the panels do you use im looking to do My commercial garage and im not sure what to get can you help me out will any of these about work best
1220*2440mm, PVDF coating, plain color, normal polyethylene core,
4mm / 0.50+0.50mm,
4mm / 0.40+0.40mm,
4mm / 0.30+0.30mm,
4mm / 0.25+0.25mm,
4mm / 0.21+0.21mm,
4mm / 0.18+0.18mm,
Do you do work in Ontario, Canada?
Have a question for you, how real caulkers do it here in Phoenix Az. during the summer months when temperatures are above 115° or more during the day...?
not sure what they use there. But the problem was i did the caulk in the shade and when the sun hit my dark panels they became extremely hot . May be they don't use aluminum panels in the extreme heat regions. Now i am using a bit different product when i need to caulk dark panels- Dymonic FC (fast curing). And trying to do that late in the day so it cures during the night.
4:52 That isn't correct. Such an application of caulking requires a bond breaker. The baker rod is useful not only minimize use of caulking material but it acts as the bond breaker when bond breaker tape isn't used. It is also used to achieve the correct width/depth ratio of the bead of caulk. Maybe the correct bead ratio and a bond breaker would have prevented that failure. I don't think you included the exact type of caulk that you were using? Also, your title was a bit confusing since it seems to imply that the problem was "sausage caulking", I know that isn't what you meant now that viewed the whole video.
Harga borongan jasa Pemasangan berapa disitu bro?
Hey man, what did you end up doing to fix the issue?
had to cut out v-grove and re-caulk all the dark lines. I Had to use tape on both sides of the line but it turned out nice. it did cost me pretty penny though (time, material and boom-lift rental ). thanks for watching.
How did you repair that caulking?
had to cut most of it out!
I've been installing ACM for over 30 years. Don't use a utility knife to score the edge to remove the pealcoat. Cut a small piece of spline. Works much better
can you explain using the spline a little more please. I'm about to do a small section of this for the first time. Thank you,
@@frankrempel8272 the spline is just a small strip of the ACM material. You can just cut a small 1”x4” piece and that will work just fine.
also you can use a plastic shim
Also u do not use solvents on this type of sealants bc the surface will cure but the inside will never cure
Hello, what brand of caulking do you recommend?
Hi!
Dow Corning
Thank you very much. Which one do you recommend? dow corning 733 732 701??
@@MrKwadwo10 Dow sill 795. That’s what my specks require on the work order . But we are in Chicago- wide temperature swing.
@@LeftoverCA true I'm in Mississippi. So I will check the specs.
Why using black silicon any reasons
Building designer picked the colors
You absolutely cannot leave the film on the metal panels instead of taping ( if you’re not a real caulker and have to tape?) when you pull the film you break the seal on the caulk and that’s only going to make it even harder to look perfect and this guys caulking is absolutely Brutal by real caulkers standards ( and I’m not talking top gun level, that’s a whole other thing) I’ve caulked those exact same type of metal panels and I know that they’re not as easy as they look . You have to be able to tape a perfectly straight line left back a tiny fraction otherwise you will do exactly what this clueless guy is doing When he pulls the film he wrecks the edge of the caulking and break the seal and then wet tooling dish soap and finger fucking Only in Woke Broken No Standards No Inspector USA