The groove machined into the flats of the right hand mirror indicates that it's got a left hand thread. This is standard practice on L/H thread fasteners to save people from heaving on them in the wrong direction.
Do you realize that you have threaded bars, which is why your stock bar ends were threaded? You replaced them with expansion sleeve inserts and that's an incorrect fitment. You should get threaded bar inserts for your bike that are compatible with bar end mirrors. As some other folks have suggested, Rhinomoto makes some and there are other brands too.
Hey have the driven d axis mirrors off rev zilla for my MT07 22 and where did you get that adapter for bar end can’t find one to fit just right when I back it out to tighten it up on throttle side ;/ ????
Now you just need the block off screws for the original mount holes. They are on Amazon for like $13, they are aluminum so be gentle when putting them on.
@@rodas_gsxs9780 They now have a dampener which they will send you for free if you contact them. It fixes the camera issue and is backward compatible with all QuadLock mounts (including the new wireless charging mount).
@@cruzinmoto funny i would have thought 1 was missing from the package.. i just ordered 2 from rev. Going to look sick with my yoshimura fender elim and CRG clutch/break leavers.. what else are you going to mod?
Because I'm assuming people are smart enough to put 2 and 2 together sir and search it themself. People these days are too reliant on others to provide things easy to them such as links for things.
@@bobfrankfurt9449 well of course they would be lighter than stock bar weights....they are not bar weights by design. They are adapters to attach a mirror. Would think that would be self explanatory
I’m I big believe in get get what you pay for I’ve seen plenty of people with the knock of versions of these and they break easily. You get what you can afford
Yes, always read the destructions.
The groove machined into the flats of the right hand mirror indicates that it's got a left hand thread. This is standard practice on L/H thread fasteners to save people from heaving on them in the wrong direction.
what I did on my throttle side is buy some washers so youcan put it real tight but still have to space away from the throttle
Do you realize that you have threaded bars, which is why your stock bar ends were threaded? You replaced them with expansion sleeve inserts and that's an incorrect fitment. You should get threaded bar inserts for your bike that are compatible with bar end mirrors. As some other folks have suggested, Rhinomoto makes some and there are other brands too.
This was helpful. Called up Rhinomoto and they are sending me bar end adapters. Thank you very much! This was very helpful! 🙌🏼
Hey have the driven d axis mirrors off rev zilla for my MT07 22 and where did you get that adapter for bar end can’t find one to fit just right when I back it out to tighten it up on throttle side ;/ ????
I’m curious did you have to order 2 mirrors? As all the websites I’ve been on look like they only sell 1 mirror
Yes you have to buy 2 they are not sold as a set
it comes with 1 pair for each or i need to buy 2 for a pair of mirrors?
Need to buy 2 they are sold separately
@@cruzinmoto thank you
Your video was a great help to me! Thank you
Guys can you flick the mirrors in traffic then back to the same position with out adjusting to correct position again.cheers
Yes
How's the vibration in the bars now that you've removed the bar end weights?
0 vibration
What size bar end did you get? 7/8 or 1"?
7/8
Now you just need the block off screws for the original mount holes. They are on Amazon for like $13, they are aluminum so be gentle when putting them on.
Sweet thanks for the heads up I wondered if there were screws to cap them off
Bought the adapter on Amazon for $20 and it didn’t come with a screw nice
That sucks lol try local homedepot
@@cruzinmoto I will thanks lol
Where's the link where you got the adapter at couldn't find them.
They are on Amazon under CRG mirrors adapter CRG Internal Mirror Adapter - --/-- www.amazon.com/dp/B001CI94DS/ref=cm_sw_r_cp_apa_i_7-3zEb0RV77SN
They tell you specifically not to tighten them the way you have
Thanks man.
Man where can I get Allen key like yours ?
Which adapters are you using?
I think I said it in the video but they are from CRG same people that make the mirrors
CruzinMoto that’s what I figured but I didn’t hear it, my bad!
@@cruzinmoto do you know which part number you ordered? I got the CRG IA-300 7/8'' ones and they were just barely too big.
Did you quad lock mount damage your phone camera
Nope
CruzinMoto damn lucky my quad lock ended up messing up the stabilization on my iPhone 11.
@@rodas_gsxs9780 They now have a dampener which they will send you for free if you contact them. It fixes the camera issue and is backward compatible with all QuadLock mounts (including the new wireless charging mount).
MrDeepseadweller damn im scared to try them again paid $500 to fix my phone the first time.
Rodas_gsxs That’s odd. In Australia Apple will fix it for free or replace the whole phone if the camera is damaged from vibration.
how can i remove them?
Is this a universal? Ty
Yes
I found you on a video about mortars, rad
You should get Rhino moto bar end mounts Theo are Made for crg mirrors. Much safer en netter thee thia
There site had a error and wouldn't process my card. So not buying them
which one should i get? because the ones made for mts dont fit the new model, should iget the one made for r1s?
a piece! i was about to order i thought $107 for the pair!!! omg now i have to second think it... i have a 2019 mt07
Yep 107 each totally worth it though. They fit on the mt07
@@cruzinmoto funny i would have thought 1 was missing from the package.. i just ordered 2 from rev. Going to look sick with my yoshimura fender elim and CRG clutch/break leavers.. what else are you going to mod?
That bike came with shorty shift levers :O
No those are the ones off the fz07 I bought
On no report not the vary vary vary vary first install/mod :p
@@ToothlessCBR this was supposed to be the first one but I accidentally did the 2nd one first
Bought these from Wish for about 17 USD, came without a manual. Thanks for the video!
Lol no you didn't
No, definitely not.
Why wouldnt u include link to bar end adapters on amazon.......
Because I'm assuming people are smart enough to put 2 and 2 together sir and search it themself. People these days are too reliant on others to provide things easy to them such as links for things.
@@bobfrankfurt9449 well of course they would be lighter than stock bar weights....they are not bar weights by design. They are adapters to attach a mirror. Would think that would be self explanatory
@@diamondheat9 another moron commenting for no reason.
oems are ugly but they actually work😂
Def not paying that much for each and not get the adapters included lol. Call me broke i call it spending money wisely
I’m I big believe in get get what you pay for I’ve seen plenty of people with the knock of versions of these and they break easily. You get what you can afford
What mirror adapters are those?
CRG Internal Mirror Adapter - --/-- www.amazon.com/dp/B001CI94DS/ref=cm_sw_r_cp_apa_i_C7e7Db0S5P8F7
Sturdy my ass they stay moving
You probably didn't install them correctly then mine never move
When i am 18 years old i hope to meet you in the US
First
Sorry bro but that's way too much,
If your on a budget yes but if you got money it's ok lol
Your focus is horrible
How are the vibrations after ditching the stock bar end weights?
There is none
@@cruzinmoto I guess the weight of the mirror brings it close to stock weight