Motorcycle Shock Bearing Replacement
Вставка
- Опубліковано 7 вер 2024
- Rear Shock Bearings Available Here!
www.rockymounta...
Your shock bearings and linkage bearings require regular maintenance if you want them to last a long time and perform properly. Ideally these parts should be disassembled, inspected, and re-greased every 6 months or so for regular riders. Over time these bearings will eventually wear out and need to be replaced so that's what we're going to show you how to do in this video. When looking for a replacement bearing kit for your motorcycle or atv shock, keep in mind some of them will vary with contents. It's important to know what you plan on replacing and also what each kit includes so you can get all the parts needed the first time. In this video we demonstrate how to replace both the upper and the lower shock bearing on a motorcycle shock. We also show you a few different shock bearing designs and how to properly remove the old bearing and install the new one without causing any damage. For more information and to see which shock bearing kits we carry for your machine, visit our website www.rockymountainatvmc.com!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Thanks. The vice method is what we used for car's u-joints. Don't do enough bike suspension (at age 70) to justify the Motion Pro kit. Does sound like a great kit for people who do more. Great video
Thank you for the video, replaced the top bearing today using a C-clamp. Your directions made it pretty simple.
6;40 That top seal got pinched, He's like fk it, its not my bike
😂😂😅
Very comprehensive, thanks
Great video, but I discovered my 1996 XR250R has the spherical bearings BUT NO SHOULDER OR CIRCLIPS. You just have to press it out like any other bearing, then center the new bearing by eye. Bit of a pain, as I kept overshooting the center.....would be nice to have that locating shoulder.
Me gustan mucho tus vídeos y tu manera de expresarlos paso por paso...me parecen sensacional porque los veo para aprender porque la mecánica me gusta vastate. La pena es que no entiendo nada de nada tu idioma...me gustaría poder escucharlos en español....a pesar de todo ...un saludo por tus vídeos.
*Ivan martinez padilla*, saludos papa'. Con cualquiera pregunta que tengas me avisas, sabes! Estamos aqui para ayudar. Gracias por haber tomado el tiempo a comentar.
Congratulations!
Because you exchanged the upper bearing? Originally ball and you installed needle. Att.
awesome vid helped me a lot 👍
This helped 👍🏻
Do the lips on the seals face outwards or inwards?
The bottom seals face inwards (grooved side of seal towards the inside)
On the top the tapered (rounded side) faces inwards.
Hy can you shipping the tools to Hungary? (europe)
I want to buy a lot of tools...
Your vids are great and very informative!!!
Thank you guys and kepp it up...
kkredmin Yes! We can ship to Hungary not a problem. You can see the shipping info by following this link. www.rockymountainatvmc.com/International/HU If you have any other questions let me know and thanks for watching!
Ok. Thanks for the answer...
How long does these kinds of bearings usually last with proper maintenance?
I replace mine every couple years or so if they need it or not.
mxkied72 Thanks for your input. That's usually a good schedule to be on. Mack Mkay These parts should be inspected regularly and replaced when necessary. With some riders they'll get replaced every race season and with others they might last the entire time the person owns the bike. It just depends on how much the machine is ridden and in what conditions. If you replaced them every couple of years and kept up on regular maintenance you'd stay running smooth!
@@rmatvmc I had a Burgman 650 for 8 years and never once replaced the shock bearings. The seals went on them first so I had to replace each side once. I do 35 miles a day in all seasons so they got plenty of use.
Great videos! (One minor nit--"disembled" is not a word; it is "disassembled.")
Dissemble is a word, but yeah the voice-over probably meant disassemble.