Це відео не доступне.
Перепрошуємо.
Razor SX500 | 72v | QS165 | Fardriver | Molicel P42a
Вставка
- Опубліковано 14 сер 2024
- Razor SX500 | Project Redemption
--
Powertrain
• QS165v2 - www.electroand...
• Fardriver 72680 - lvchao@far-driver.com
• 72v 29.4Ah (20s7p) Molicel P42a | 120/300a Ant BMS - NakPak
• 3 Speed Switch - www.amazon.com...
• Alta Throttle (purchased for $55) - www.ebay.com/i...
Key Switch - www.amazon.com...
Wheels & Tires
12" Piranha Supermoto Wheel set - tboltusa.com/s...
12" PMT Blackfires (120/80R12 | Soft Rear) -
www.73motopart...
12" PMT Blackfires (100/90R12 | Soft Front) -
www.73motopart...
15mm Front Axle - www.amazon.com...
15mm to 12mm bearing reducer (for rear wheel) - www.ebay.com/i...
Brakes
51mm Dual Piston Front Brake - www.amazon.com...
51mm Single Piston Rear Brake - www.amazon.com...
Left Hand Master Cylinder - www.amazon.com...
Hydraulic Line for Rear Brake (4.92ft) - www.amazon.com...
Suspension
600mm Front Forks - Purchased as a closeout deal for $50 at wholesale-cycl...
Ohlins 9.5 x 3.0 rear coil shock - FB Marketplace
Triples: www.amazon.com...
Accessories
Drop down adjustable foot pegs - www.ebay.com/i...
Switch Panel: www.amazon.com...
12v 15a Stepdown/Reducer - www.amazon.com...
Fuse block - 6 Way Fuse Block,12V Blade Fuse 6... www.amazon.com...
12v Taillight - www.amazon.com...
Underglow - a.aliexpress.c...
Taillight mount (Tim Newton) - www.amazon.com...
12v Headlight - www.amazon.com...
ODI MX Grips - www.revzilla.c...
CRF50 Tall Seat (Used SX500 seat pan) - www.amazon.com...
Custom
Motor mounts - Royce Ramirez (Facebook)
Bolt on extended swingarm | 5-6" (Jeremy Valentin) - electrocyclega...
58t rear wheel sprocket - www.rebelgears....
12t QS165 sprocket - www.electroand...
420 Chain - www.amazon.com...
Extended kickstand - www.amazon.com...
Ride safe out there!
glad to see yout back lol
Yes sir! We out here 😅
Hey I noticed you said that the crf50 seat isn’t as comfortable as the luna float seat. Is there a reason that you didn’t use a luna float seat for this build?
I wanted to keep the stock plastics and there would be gaps if I used the Luna float.
It would also require more modification and retrofitting. I really just wanted to get this build up and running asap 😅
Yes sir! Such a dope build! 🔥🔥🔥
Hella good idea daisy chaining those switches too! Ill have to remember to do that next time.
Thanks brotha! This build wouldn't be running if it wasn't for you 🙏🏼🤙🏼
@@EmxBrandon Yuuup! They come daisy chained like that too which is even better 🙌🏼
@bolectric man im stoked i could help! I feel apart of the process but you threw it down bro and killed this build!
Ahh i forgot you got it as a whole panel right? I was like, damn my switches didnt come daisy chained 😆 i got my rsf apart i might do that to my 3 switches real quick to clean it up 👌
Also what kind of range are you getting with the 29.4ah battery and what’s the average speed you go to get that range
Cruising speed of 25-30mph will get me about 40+ miles. Anything over 40 will get me anywhere from 25-30+ miles
Can those drop down pegs hold your full weight if you stand on them? And also, how long is that spacer that you used to mount them to the stock peg mounts?
Is the soloid pandermic capacitor engaged to prevent any modial interaction from the capacitive reactance?
The original Machine had a base plate of prefamulated amulite surmounted by a malleable logarithmic casing in such a way that the two sperving bearings run a direct line with the panametric fam...
Solid question but.. did it consist simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented?
@@EmxBrandon 😂😂😂
What’s your parameters setting on the fardriver? I am building one with the same motor and a fardriver controller. Thanks
Do you remember the length of your Velcro straps?
Awesome. Can I ask. My worry was with the electrocycle garage extensions.
I am worried they would break with the QS165. What do you think?
It's a solid extension and very robust.
You're golden if it's a street build but I can't say much for a dirt set up..
IMO, I'd go with a fully custom swingarm if you plan on running a dirt set up especially if you plan on jumping.
Sick build! I’m going to go the route of installing the Alta throttle on my eFTR. My dad has an Alta and he happened to have an extra one (sweeeeeeet) so I’m wondering if it was easy to get it wired up? I’m using a FD 72680 and I’m picking up the throttle tomorrow.
Thanks and yes it's pretty straight forward! Red, black, purple is signal. You can google for the wiring diagram. EMXBrandon also has a great video on FD wiring which is what I referenced for this build 🤙🏼
Hey how is the bolt on extended swing arm. I heard someone say that it isn’t very stable and it’s more for street riding. I like riding both street and trail so do you think this swingarm would be fine or is it a bit sketchy?
Solid for street but I can't say much for off-roading. I personally would want something fully custom for off-roading instead of a bolt on.
Baby from hell😅
Im have 2 mx650's i got used off of craigslist for a good deal so that i can upgrade them but i was hoping to get some advice on witch motor is better choice if im looking to get the most power,speed, quality, and durability between the ec4p motor by electro and co or this qs motor your using. I know theres a price difference and one is bolt on and the other would involve more modification to work and i dont mind paying more and or doing the extra work if it pays off in the end so if amyone has any advice on this it would be greatly appreciated!
I highly recommend the new Sotion FW11. It's plug n play/no modification needed to the stock razor swingarms, and seems that it outperforms the EC4P and QS165 in addition to handling heat a lot better.
I def would of picked up this motor if it was available during the time I was working on this build..
eforcemotorsandcontrollers.co/products/sotion-fw11-5kw-motor
@@bolectrichow when peak power only 10kw.?
What’s the link for the fan?
deciding between the qs165 and the ec4p idk
If you want something that's plug n play then EC4P is def the way to go.
QS165 will require an extended swingarm along with some fabrication & modding for the motor mounts along with sprockets.
It is capable of more power but will require more effort and coin to get it to fit..
Total cost?
How much power are you pushing?
About 18kw on my current tune.
Where you got your sprockets for the QS165 motor?
rebelgears.com for the rear sprocket & www.electroandcompany.com for the motor sprocket.
@@bolectric awesome, thank you sir, give us more content of the sx500👏🏼
@@diyadventures9138 Will do! 🤙🏼
Top speed?
Haven't performed a proper speed test yet but I'm think between 65-75mph