If you have this problem and some tools you are in luck. Don't destroy it: When you are at part 2:03 what you have to do is with a dremel (you can also achieve this with a handsaw with a good hand) make a longitudinal cut to the central axis to turn the axis into a flat screwdriver head. This axis is a screw (The spindle thread can be seen at 2:24), so immediately, using a flat screwdriver, carefully unscrew the blades (which is desperately trying to be removed at 2:06). In part 2:11, you do have to remove it from that mode (in case you want to clean it) although it will not be necessary because the problem is precisely that the blade plate 2:06 is too tight to the screw, if you loosen it slightly you will be able to solve the problem, which is basically that the motor cannot turn. The blade plate should turn easily by hand, once loosened you can reassemble it. By the way, thanks for the video, it has been quite useful.👌
If you have this problem and some tools you are in luck. Don't destroy it: When you are at part 2:03 what you have to do is with a dremel (you can also achieve this with a handsaw with a good hand) make a longitudinal cut to the central axis to turn the axis into a flat screwdriver head. This axis is a screw (The spindle thread can be seen at 2:24), so immediately, using a flat screwdriver, carefully unscrew the blades (which is desperately trying to be removed at 2:06). In part 2:11, you do have to remove it from that mode (in case you want to clean it) although it will not be necessary because the problem is precisely that the blade plate 2:06 is too tight to the screw, if you loosen it slightly you will be able to solve the problem, which is basically that the motor cannot turn. The blade plate should turn easily by hand, once loosened you can reassemble it. By the way, thanks for the video, it has been quite useful.👌
Thanks for your video.
It has helped me to know what was wrong with my dishwasher.
it was a very good dishwasher.
Good video but miss the whole part in the beginning how go get inside the machine in order to dissasemble the pump from the rest of the machine.
See this movie : ua-cam.com/video/QUWWFkU8T64/v-deo.html
Thanks for sharing this nice clip.
Nice movie
At the end, did you fix the pump?
Or replaced it?
it is almost impossible to rebuild that pump back. When you get heating ring from gaskets out, it is over without special tools.
Почему нет пояснений?
I just don't remember. Spin the circle to 6 o'clock
i get e20 what is the reason behind that or what do i do