Industrial Steel Warehouse Design and Modeling in Staad Pro V8i
Вставка
- Опубліковано 24 лип 2024
- Industrial warehouse is a important structure in industrial sector. It required long open space for working facility. Only two columns at two ends is handling the large span with slope roof and lightweight sheeting. In this video tutorial I have shown how to design a industrial steel warehouse full structure through 3D modeling in staad pro V8i. I have stated how to make 3d model then define member. Assign member with various load case and load assign. Load combination, analysis and design. I have also shown bracing, in this model I have used cable wire bracing. Finally I have shown how to find reaction for foundation design. This tutorial is a complete design process of industrial steel warehouse using build up section. I have not shown hot rolled section. But you can use any type of hot rolled section if you want from the software list.
Source File Download:www.mediafire.com/file/c4v33bk...
Subscribe My Channel for More Video Update:
/ structuralbd
Like Us on facebook: / civilandstructuralengi...
Join Us on facebook: / civilandstructural
Follow Us on Pinterest: / moynnuddin
Follow Us on Twitter: / structuralbd16
Follow Us on Tumblr: / civilandstructuralengi...
Follow Us on Google Plus: plus.google.com/communities/1...
For more information visit my website:
structuralbd.com/
Watch Other Videos of This Series:
Watch More Video of Auto CAD2016 Full:
• Auto CAD 2016 2D
• Plan Elevation & Secti...
Watch Full Video Of Etabs 2016 Concrete Structure:
• Etabs 2016 Concrete St...
Watch All Videos of Etabs9 Concrete Structure Analysis & Design:
• Etabs9 Concrete Structure
Watch Full Video of Staad Pro V8i Concrete Structure:
• Staad Pro Concrete Str...
Watch Full Video of Sketchup Pro 2017:
• Google Sketchup 2017 B...
Watch Full Video of Revit Structure 2017:
• Revit Structure 2017
Watch How to Design and Analysis Truss Using Staad Pro Software:
• Truss Design in Staad Pro
Learn Industrial Steel Shed Main and Gable Frame 2D Design in Staad Pro V8i:
• Steel Shed Design 2D i...
Truss Roof Warehouse Design with Hot Rolled Section in Staad Pro V8i(Complete):
• Truss Roof Warehouse D...
Watch Ful Video of 5 Storied Steel Structure Design in Staad Pro V8i:
• 5 Storied Steel Struct...
Industrial Steel Warehouse Design and Modelling in Staad Pro V8i:
• Industrial Steel Wareh...
Its a big help! Thank you so much! I did pass my job interview because of this. ❤❤❤
thank u sir, it is a good video, but i recommend u one basic introduction training like why we provide haunch,tapered section,bracing,rafter, truss ,pipes
Thanks a lot for sharing your knowledge. It is very useful
Thank your very much sir. Thankyou again for valuable information.
Well explained, a great tutorial to learn. Keep it up :)
Great video , but you need to use Repeated load with Tension Member instead of normal combinations , because in your case Tension Member still Producing Compression force and affecting the design result
Thank you so much for this video.
Thank you so much.
Hi..Thanks, it was really a nice video to try modelling. I have a question, during post processing there were some beams / rafter whose value were more than 1 so you changed particular member size and again did run analysis. It brought some members value below 1, but there were still some member which were not green (or the value were more than 1). Why so??? And Do we need to do anything again for that? Pls respond. As I'm in a learning stage of Stadd Pro. Thanks again!!!
Have rafters checked for deflection in this model?
If not how to check please explain
This is helpful and informative.
your tutorials are really awesome, and simple to understanding. i am having some different issues, can we talk.
Tnq ....use full video jioi
Hello sir, great explanation.
one thing I wanted to know how to assume the tapered section length. if we don't columns at the gable end.
also, you not considered purlins in modeling. please reply me as early as possible.
Thank you for the video. Can you please upload one with EOT crane in consideration?
very usefull, thank you so much
Thanks bhai.. Really loved it.
Greetings... Please do a modeling, analysis and design of builtup columns, gantry girders, trusses, etc.,
Getting Good Knowledge
Thanks for your efforts in making this video. However we need to use REPEAT LOAD instead of LOAD COMBINATION. Also for the rafter design in this case we must consider the LZ & LY parameters since you have made the rafter segmented. We also need to conduct Direct Analysis Method. In AISC 360 this method is stipulated in Chapter C. Thanks.
Mr. Irwan in this video why he has not considered wind load in Z-direction. I just wanted to know your opinion.
How to add load of Steel Sheet, which is use for cover the Wearhous.?
Or it's not required?
Thank you for the video. Can you tell me the thumb rule for estimation of qty of steel in per sft
Sir, Is there any software you know for tapered column and tapered beam connection design?
Make a video on RAM connection also for making connections to steel members.
Thank you so much. Can I gate design of Industrial warehouse design using euro code 3 in staad pro video tutorial
Thank you for sharing
great video and thnx a lot
sir,
can u do the same of Pre Enhineered building for the Multispan.
It will we very use full for us sir
Brother God Bless You. Any changes to upload Prokon? Design Model Industrial Warehouse Design
Hello sir thanks a lot for this model...i just wanna know can we design through our indian code or else can u please share video related to pre engineering building and its analysis through IS code
You have to release moments to bracings also but you did not so that why ?
do u have any mono slope roof design???? if u have pls update it soon
Hello sir, very simple and nice video... please tell why have you not considered wind load in Z-direction.
It's helpfull video I have one question y is that purlins have not considering will doing memeber placement???? ..can u plz do a complete design and analysis procedure of IS Codes with explanations of load assigning and resign of load assigning means y particular that load for the wear houses .. since I am a mechanical student I wanted to understand it so plz help me out.
How can we design connections further....!? I mean welded connections or bolted connections...
nice video but your rafter sections are messed up after splitting them, also tension brace won't work if you combine your loads this way and finally you didn't assign Kz for columns
Thanks bro..can you please give me a excel IS 875 wind load calculation for warehouse
Sir how can I download this excel sheet,
Its can't download.
Please help
Dear sir, Really Good thank you lot, Can i get wind force calculation LX?
How do with middle support with bracket and bolt details
How to add stiffeners in steel warehouses can anyone know
Bro, knowledge worthy vedio, but also share that excel sheet which you have prepared.
Sir, can you explain the wind load calculations.
Sir, we need steel Quantity Estimation for same ware house building
Dear pls make a video about your xls sheet how to calculate here
Thanks for the amazing tutorial. Can you please give the excel file for wind load? And the drawing layout in AutoCAD please?
Hello sir, that's cool although there are some failed member on your design..
Thanks
very nice
boss please make a video tutorials for design connections by using Microsoft excel from the value of staad pro model , thanks a lot
Hi sir I think you forgot Nodal Loads ,Dead load for the side Purlins and G.I. Sheet Wall?
Sir while design stadd shows design of tapered member is not supported what can I do sir?
Re-run your model using a newer version of STAAD
plz explain why assign pin support ?
why didn t you take into considration wind 90 degrees maain direction also
sir thanks for this great video, can i get its staad editor file please.
hello sir, what is differece between partial release and release.
In partial release end will take percentage of moment and in release end will not take any amount of moment
No need to define Lz and Ly??
Sir plz change the starting music...its more terrifying then race 3 or conjuring
please kindly send me the excel sheetfor wind load calculations
ASSALLAMUALAIKUM, DEAR SIR CAN U PLZ UPLOAD DETAILS ABOUT CONNECTION DESIGN.
Hello Sir, Which country are you? Sometimes I hardly catch your vocie.
My Dear.... mono slope roof wind calculations also update....
How to calculate wind load on excel ?
Boss hope that you will show connection design in excel sheet
100 th comment🔥
Sir please share how to calculate loads
Please share the complete design data sheet
can you please shoe me design and analysis of frame structure
Which type of frame structure?
What about connection design
Use any other software. I do manually
Sir,
What about roof sheeting?????
He already considered in roof dead load itself i think (Purlin+Sheeting)
which code u use ?
American code
issues in staad-pro.
Super bro. But how to Design the section bro..
What section?
@@structuralbd
Tapper section as well as joint bro
You uploaded a video that helped us better, but you are not explaining things, terms, loading properly. You are just showing how it's done. We should too understand technical part behind every consideration in this model.
mono slope roof
CAN YOU SHARE THE SPREAD SHEET PLS.
Download from description
@@structuralbd Sir didn't download from this link
Cad file ta dite parben?onek help hobe amar
sir..tell me how calculate slope 1.5 from 1/10
Slope is 1:10, Divide the half of span by 10(Keep the unit any either mm or ft the result will be as per your unit)
@@structuralbd ..thanks..sir..your video is very helpful for understand how to actual work on staadpro.
sir, make some video on pre engineered building project in steel structure..and i request you next time show all calculation .
calculation in written as like all load calculation , bending moment and shear for diagram which is help for understanding design.
How to draw purlins?
The way I have shown, no need to draw purlin. However you can draw purlin like beam but design parameter should be changed then.
@@structuralbd thank you😃
Can you please teach me how to decide the rafters and columns sizes( like web , flange etc etc.)?
@@parmbirsinghgill3603 It depends upon size available used in your country. Plate thickness is 5,6,8,10,12,16,20,32 mm and width is 150-275. Depth usually 250-1000. But they are none fixed
@@structuralbd thanks for considering my questions but my question is that suppose we have building with 50m span now how to decide the sizes for column and rafters?
you did not modify effective lengths (Ly, Lz) of rafters and columns, this will get your design result wrong sir!
Can you share Excel sheets of load calculation on ware house
Check the video descriptions
Written part disturb me to understand
It's waste of time don't watch it...he will confuse u a lot even for simple modeling he will delete and assign n number of times. Waste of time
boss please make a video tutorials for design connections by using Microsoft excel from the value of staad pro model , thanks a lot