Two of these issues in particular may appear to be self-inflicted, but consider the following: 1. A huge percentage of 6.4 owners who delete their DPFs never do an EGR delete, leaving the coolers in place as I had initially done. The rupturing of the horizontal cooler that I experienced was a result of the delete, however it is a legitimate issue that many owners have/will experience with the truck configured that way without the EGR deleted. As most people who are even slightly familiar with these trucks know, doing these deletes are IMPERATIVE to obtain any length of life out of these trucks. 2. The broken pin in the clutch fan harness which had affected the A/C system is just a pain to deal with in general. The connector is extremely difficult to disconnect as the metal prongs become virtually welded together over the years. Anybody that has done a serpentine belt change on one of these trucks knows exactly what I am talking about. I am certainly not the first, and definitely not the last person to separate a pin from this harness by accident. Yes, this was a mistake, but who knows if I could have ever gotten it apart without that pin slipping loose. This is a tough little problem to find and I wanted to include it in this video as it is a simple problem that will be overlooked 9/10 times. This video was intended to be an honest and detailed account of my ownership thus far. Nothing more and nothing less. If this truck gives me bigger troubles down the road, they will be documented here on the channel. I have nothing negative to report at this time because nothing from the laundry list of issues that these trucks can experience have actually happened to me personally. Everyone has a 6.4 horror story. I'll wait to tell mine until it actually happens to me. We will see how long this truck lives for! Thank you for watching.
Taylor Smith, I also have a 6.4 but my biggest problem is that mine ran away after a turbo failure but I still have and is currently rebuilding it, luckily the engine is still in good shape and it is also completely stock with about 233,000 miles but now I’m getting it all deleted. I have been working on it for the past 6 months and just finally got it to start but only for about 15 seconds then it just shuts off and goes in to a crank no start and there a no codes popping up so I’m assuming it might be a fuel system issue
I special ordered my 2008 6.4 brand new with a rare 5 speed manual transmission. There were a few recalls done to the truck while still under warranty like the radiator with the plastic that you referred to in the video as well as one or two other things (all under warranty). At around 100,000 miles I had the Mini Maxx installed and had everything that needed to be eliminated deleted at the same time. At some time afterwards one of the pipes that connects to the turbo broke and the dealer welded in a new pipe. I won’t mention the dealers name to avoid any trouble but the Techs that work at the dealership where I bought my truck really know their shit and were able to give advice regarding the tune & delete at the time of implementation. I too kept all of the deleted items in case I end up selling the truck someday (I doubt I’d ever sell it, though). Knock on wood, as far as I’m concerned the few things that have gone wrong with the truck never left me stranded in need of a tow. Through the years, the same as with any vehicle a few thousand dollars have been spent but I don’t have any horror stories to report. The oil and fuel filters are always changed simultaneously between 3 ,000 - 6,000 miles. The truck is lifted 4” which gives it an awesome looking stance while still allowing me to tow with my 5th wheel of ball hitch. The truck now has a little over 162K on the clock and still runs and looks as new.
Dillon Lawrence I’ve got a 08 6.4. I was wondering if you’ve had any issues and how long have you owned it. I purchased mine with 55k and deleted it soon after. It currently has 93k and I haven’t had any issues. Just wanted to see how your doing being yours had more miles
@@tjlift22 I havent had it very long, it was one of my best friends trucks so I've been around it for years. The motor blew up on him because of the emission controls so he rebuilt the whole thing and deleted it with aftermarket parts. I did have the capped egr pipe blow out so I deleted the whole pipe. Last weekend i had the transfer case blow up on me due to the front drive shaft going out. If you lose power, it's most likely one of the up pipes for the turbos. If you feel the truck start vibrating when your driving pull over immediately and unbolt your front drive shaft, I made the mistake of letting it go and now the trucks down until I can dish out 1500 on a new transfer case. I love the truck and it's worth every problem I've had though.
I have the same tuck mentioned in this video. Over 250K. BONE STOCK! I pull big horse trailers and very big Teton Homes 5th wheel with it. The truck has amazing power. I still own a N/A 6.9 that I bought in high school, a N/A 7.3 and a Powerstroke 7.3 as well. I've owned two 6.0's. One of those went bang at 37,000 miles. The other one had just over 200 trouble free when I sold it. The 6.4 has had a few problems. Mostly cooling system related and not major. I personally think you can avoid most problems with these trucks by using them as they were designed. In other words, keep them warm/hot. These are not designed to be grocery-go-getters or commute cars. They are designed to haul. You can let an old 6.9 or 7.3 idle with the a/c on for a week and not hurt it. You idle any modern diesel for more than a few minutes and you'll have problems. Those twin turbo chargers provide an excellent balance of power at the low end and high end. Is it possible that the motor will become a boat anchor somewhere down the road? Sure. But my truck has been paid off for a long time and I use it for what it's designed to be used for. I suspect it will give me another 100K to 150K before I think about a rebuild.
@@todda8695 its smart not buying a $75,000 truck. It's not smart buying a truck that has a junk engine in it. Anyone you talk to that works on diesels will tell you the 6.4l PS is a junk engine, just buy a different engine.
Bought my 2008 6.4 with 105k miles, transmission went out one week later; replaced transmission and have not had a problem since. 175k miles now, has a tune, dpf and EGR delete. I love the truck
After 3 factory primary radiator failures, I purchased S&B body mounts and mishimoto primary radiator, on my f250 6.7. No more radiator problems and the S&B mounts, makes the truck feel like you are driving a new truck. Good luck and great channel sir.
I'm on your side bud got a 2010, bought used and derated at the time. Took a gamble removed all the emissions off the truck put a simple gearbox z tune it's been a blessing every since. Still have a few things I'm working through but its to be expected like you said. Keep up the channel please.
I didn’t do as much research it as I should of on the 6.4 before I bought. but after hearing some horror stories after I bought it, I was happy to find your post. I think I got lucky, the truck had 109,000 miles on it, the previous owner took great care of it inside and out. After watching your videos I ordered the replacement exhaust and the EGR delete kit plus the minimax tuner. Looking forward to seeing the oil stay clean for longer then 100 miles after I change it. Thanks again please keep posting!
I have a 2008 F450 Harley edition. It was fully deleted at 36000kms and I studded it without pulling the heads (original head gaskets) at 136 000kms. I've put some minor upgrades throughout the years . Truck has treated me great and I keep up with good servicing. Proper frequent services prevent most failures.
When tuning with the Mini Maxx after a full delete on a 6.4L, make sure you DO NOT choose the “easy” tune as it will try to cycle the EGR valve and you will still get the wrench symbol trouble code. You need to select either the “mild” or “HD300” tune in order to be trouble code free..
Make sure you are clearing the water separator (located on the driver side frame, about halfway down the truck, looks like a black box with a little tube coming out of it.) Draining this of water until you see only diesel fuel coming through. Forgetting to do this can cause water to get into the engine, and thats just a bad time for anyone.
Beautiful truck! I have a 2008 F250 and deleted everything at 32k miles. I love my truck. I have the H&S mini max and 99% of the time set it on "no power" and when towing I set it on "mild" as to not overload/hurt the trany/turbo due to the fact the original factory components were not designed for the added HP and torque. Oil, oil filter, fuel filters and coolant cap changes every 3k miles. Coolant flush/replacement every 2-3 years is key to protecting the "wet sleved" engine.
Nice truck. I have 2 of the 6.4's. One is a 2008 F250 which I bought with about 150,000 miles on it, but it had already been deleted, and had been well taken care of. I've put well over 60,000 miles on it with no issues. Also have a 2008 F350 that wasn't in great shape when I bought it, and I had a local diesel mechanic do the delete on it. However, it was too late. On a trip to Wyoming hauling some stuff, I lost the engine. Cracked pistons, the whole nine yards. Moral of the story is religious maintenance and servicing. I love my 6.4.
99% of people that talk bad about these truck never had one, they can be great trucks. 331000 on mine when sold, two alternators that was the only problem I ever had, I have moved on to the 6.7, love the truck but never will it make the power my 6.4 did
@Camo maybe so now. I've never driven a tuned 6.7 newer than a 2014, but up until then I still have to say 6.4. Smoked several 6.7 with my 6.4 including the 6.7 I have now. I've have owned all powerstroke from 1995 to 2014. The 6.4 was a bad ass. Just my Opinion
Bought one brand new in 2010 the last year the 6.4. The only thing I replaced on the truck is the alternator that’s it. I know other people have had problems with them, but I have had zero problems with my 6.4 power stroke@@kennycopeland282
Tyler Smith I really appreciate the step by step on the videos , I also have a 2010 6.4 Harley Edition close to 150 k miles , my first Diesel truck and didn't know the Headache that came with owning a 6.4 , I'm in the process for doing the delete on it , so I learned quite a bit watching your videos , Thanks again .
The biggest problem i see is from neglect. Frequent oil changes with synthetic oil and coolant replacement with the Motorcraft coolant additive is key. Heavy tunes and abuse are also tough on a 6.4. Remove the valve covers and check the rocker arm tips for wear every 50.000 miles and replace as necessary. I have seen these engines last 300.000 and more with proper care. Most of the "know it alls" have been trained by UA-cam and the internet and have never had the hood open on one.
Front covers always have cavitation. Turbos are Junk. There’s a reason Navistar only put a single on these things. They make crazy power. To me they are the nicest body style but that engine is a boat anchor
So basically what I’m getting from this is that with a full EGR delete and proper maintenance it’s a solid engine bc the system can’t really tear the engine apart. I’m thinking of getting one but I’m a little worried about having a bad experience with it.
At 142000 miles my 09 6.4 grenaded. The #8 piston cracked. I spent the money for a re-manufactured engine. It runs great. I have a warranty on the engine and I still love the truck. It was a lot of money and it hurt, but to sell it and buy a new one would have been even more money.
@Trae Thibodeaux It was deleted around 129000 miles. But lets face it, it had spent too much time with the DPF and EGR. I knew this could happen before I bought the truck, but it still sucked. Now the truck runs great. It has the Jasper reman engine. It is also studded. I have no reason to believe I can't get 200000 miles out of her.
Dude ! Perfect. I have a 6.4 as well. All the same issues you addressed I had to fix. The one I had problems figuring out I think you mentioned .. the fuel rail pressure sensor. The symptoms you had are similar to mine. When it’s hot , In gear , at full stop or at a red light ... I hope this will fix my idle as well! Either way thank you Taylor! Appreciate.
I have an ‘08 I bout last year and absolutely love it. I knew going into it as well and had no problem at all. I put the H&S tuner, deleted and straight piped with coolant filter, db venom uplift pump, mishimoto oil catch can, banks intercooler and pipes. She pulls my dump trailer and bobcat beautifully.
Great video. I also have the 2008 6.4 and have had only normal wear and tare issues. Alternators. Radiator. Turbo rebuild. After reading forums and freaking out that I kept blowing coolant out the degas bottle and I have mine tuned I was convinced I blew my head gaskets. The ford dealer told me to keep in mind, you’re reading blown head gaskets from all over the world, guys who tune their rigs and sit in parking lots red lining the RPMS and turbos doing donuts over and over and beating the HELL OUT of their trucks then wondering why it’s blown and blaming the 6.4. He said blown head gaskets on the 6.4 is extremely rare. Turned out that after 260,000 PROBLEM FREE miles my turbo needed rebuilding. The pressure leak is what was causing my coolant to blow through degas bottle. NOT BLOWN HG’s, blocked oil cooler. I’ve pulled over-loaded dump trailers that the combined truck trailer and load was 34,500 no problem. That was one time and didn’t realize it was that heavy till I hit the scales. The ford techs will tell anybody if these rigs are PROPERLY MAINTAINED they are fantastic engines, more power than any regular contractors need. They’re correct. Mine is pushing 300,000 and I bought it with 112,000 a few years ago. Driven every day and worked like crazy. I love my King Ranch and have NO PLANS except when the day comes I will be dropping in a Cummins conversion. Truck still looks brand new, leather is top notch. I can’t say enough about the truck and I still get TONS of compliments and yes the truck is untouchable here in Portland, Or. dodges have tried to take me, they can’t, chevys, I eat them up. I’ve raced maybe 7-8 guys in their dodges and chevys at lights and have smoked them all, with ease.
Could you clarify where the pressure in the cooling system was coming from? I have a 6.4 and experiencing the same thing believing it must be head gaskets. If its from the turbo how is it pressurizing the coolant system? Thanks
Take a chill pill. Unless this truck is a professionally modified race truck your asking for huge time out, and $. I know the temptation is hard to resist. However, the performance and reliability to show up on the job site is the win. Not red light to red light.
Hey Brother great job on the jumper wire for the fan clutch-you could’ve been chasing your tail on that entire issue & wasted not only $$$ but good ac parts as well - jumping down a Rabbitt hole can be very costly-anyway thanks for your time,btw im a die hard Chevrolet fanatic as well as a self employed Mobile Diesel Mechanic for the last 27 years & i get great tips from your videos as I have customers w/2008,09&10 6.4l power strokes-thanks again you do a great job in your clear & audible speech,detail & down to earth common sense.🤙
I bought my 6.4 new in summer of 2007, I have a 2008 F350 SRW 4x4. It’s been great. Only things wrong have been: Twice had to replace radiator due to side tanks leaking because of the frame flexing & twisting from being off road. The exhaust sensor 8C3Z-12B591-E I’ve had to replace 3 times so now I carry a spare cause it throws it into limp mode. Alternator at 100,000 & that’s it. I have 110,000 miles now 14 years later & runs great
SEE GUYS. Fords can last a long time! Most people would ignore a check engine light but that what's why they fail. So long as you keep up with oil and filter changes every 5k or so, fuel additives, routine wash, diaper change, and air filters you should have very few problems.
@@garysmith5741 so the EGR has to be removed first. When you pull the re-gen system, as soon as you start it, it will throw a code into the computer system. When you turn on your tuner for the first time, it will ask you about both deletes, and will turn off those codes. I took mine into a shop, they did both deletes at the same time, then did a 'tow tune' flash to the on board computer.
Same story, 2008 Grandpa truck (Lariat CCSB, RWD). Bought it for a song from a Ford dealership because it had a broken Y-pipe. I was able to replace that, delete the DPF and EGR and tune it for less than $500. This was all with the cab on, as I have skinny arms and tiny hands, and an excellent sawz-all. It's worth more now than I paid for it, but as long as SWAMBO keeps her travel trailer, I'm keeping Grandpa.
Just found your channel great to finally find someone that knows the 6.4 intimately now I hope I can keep following you for as long as you keep your truck. But I will keep mine forever or something catastrophic happins. As always keep the shiny side up 😊
Nice video. Thanks and I appreciate the information. I bought a 2008 F350 Lariat 6.4 diesel in January of 2019 with 119k miles. Within a month and around 121k miles, the wiring harness located above the HPFP went bad and had to be replaced which meant lifting the cab. I went ahead and had the HPFP replaced at the same time. I had a warranty that covered half the cost. Since then, I have had no major problems. The truck runs very well. I do maintain and take care of my vehicles and do regular maintenance at the local Ford shop. Current miles is around 126k miles. I do use a fuel additive (Archoil products). It goes through a regen about every 200-300 miles and recently it has done a regen at the 400 mile point. Overall, this truck runs very well.
@2lapsdownpodcast Yes, still running great. Had to get some brake work done and replace some brake lines, but some of these things come with age. Otherwise, the truck is still running great.
Ive owned mine for 3 years. I got the truck with 66k miles on it and as of this moment it has 75,xxx on it and it has been sitting for 5 months. Truck has blown head gaskets, a messed up transmission, and steering problems. The owner before me abused the shit out of it and now i am stuck with it. I only paid 8k on iaa salvage auction because a tree fell on the cab. I bought the truck at 17 while i was still in school and me and my dad spent 2 weekends swapping the cab and interior as well as both passenger doors and the hood. I gave it a few months saved my money and had the truck deleted. While i was waiting on the rebuilt title to come in after it took 6 months to get a new vin plate. The truck was running good (I assumed). The first thing I noticed when i started driving it was the steering was loose and the transmission made a chattering noise but shifted fine. Then one day getting on the interstate i was driving and stepped into it and a buddy of mine was behind me, he called me on the phone and told me that the truck had just shot coolant out the driver side fender well. The truck has never overheated since ive owned it. After that happened I replaced every component of the cooling system and it didnt fix it, coolant was still disappearing slowly. Then the transmission shit the bed. So here i am 20 years old with a truck that i dont have the money to fix and if i sell it i wont get much out of it. I hope you have better luck with yours than i have mine
There is a plate on the front of the engine if you don't keep the coolant up with good diesel engine antifreeze it will pitt and cause serious damages. Check for coolant in the oil. Get it out of there fast my repair coast me 3K. It started with coolant going down for no obvious reason then I started using strait water. This was 2018. No trouble since. But I got lucky. Real lucky
@@mutanay77 Because I can pull the 5.9 for like 1000$ and have a more reliable platform than even a built 6.4. To make them reliable you have to go billet and you’re talking about $30,000+ in a motor. I can blow up nearly 30 5.9s before I match the total. Plus it’s a f450 so it’s really meant for hauling/towing and Cummins is king for that. I’m not pulling sleds, just some skid steers and excavators and HDPE
@@BigBlockOverland well you’re not wrong on the grand for a 5.9. But I daily a 6.4 for 2 years now and a simple delete and tuning is all I need. And if you want to go built the max is like $15K from choate or kdd. Not 30k
@@mutanay77 not bad pricing if it’s billet. We have bullet proofed 6.0s and 6.4s in our fleet and they’ve been great and can pull like hell with a conservative tune, but, I’ve seen some swap videos that made me want to do the swap. Especially the ones from Taylor Ray. I just want to engage the challenge to do it to have something different and easy as heck to work on.
I drive a 2010 F 450. 67000 miles. Blew a turbo boost boot is all. Just did the re-gen delete. Last week, changed the thermostats. .. one was sticking closed. Had a small pinhole leak on to- radiator hose. Haven’t checked yet but I’m thinking I’m getting 4-5 mpg better. Was getting about 11 ....up , down and around the hill. Running a 4” pipe off factory muffler.
Just picked up a well used 2008 F350 to be the "junk truck", used for towing or taking things the dump or other things the daily driver can't or shouldn't do. Former fleet truck, chassis cab with 9' Knappheide utility body and 1,300lbs Tommy Gate. Previously used by Thyssen Krupp elevators. Had it delivered to a mechanic to be gone over before putting it back on the road and he was blown away about how good the 6.4L ran. Fully stock except for an aftermarket fuel filter cap. 206k miles. But, now I'll know what to keep an eye on!
I appreciate your videos on the 6.4 powerstroke. I bought a 2010 lariat 250 with 59k on it a few months ago and it was based on a few of you guys with level heads and experience with them. I know people absolutely hate them and have yet to find one of those haters in person that actually owned one. thanks for no bs videos.
I have a 2010 6.4 with 412,000 on it. Have only ever changed oil and coolant per service manual and a serpentine belt. Nothing ever has happened to mine. Makes me believe most people with problems either beat theirs or are shitty with maintenance
Mine was maintained from day one by Ford every 5k miles and it killed 2 short blocks before 75k miles. It was 100% stock and never towed near its max capacity. 🤷♂️
THANK YOU for problem number 4!!! I have been having the same exact issue with my ‘08 F250 it runs cold on the highway but at idle it blows just not cold air. You are the only person that has mentioned the exact same problem. I will have to check to see if that is the same issue on mine. I have also had to switch out the alternator and I’ve had issues with the glow plugs as well. It was also glow plug number 8 that was throwing a code. We just went ahead and switched out all the glow plugs and wiring. Honestly, I love my 6.4 😁
Maintenance is the key to every vehicle all makes and models I have a 6.4 and love it and I have a 2012 6.7 and the 6.4 Will run circles round a 6.7 and even out tow it to
My last problem with my 08 F250 was a high pressure fuel pump cable/connector that required the cab removal - $3,000 to replace $50 part.... I love the truck by it takes courage to own one.
Enjoy your videos, I have F-450 , bought it bout same time as you, had 91000 miles,new to the power stroke family... Had dpf delete with the mini max, I removed egr system, but had exhaust leak in up pipe to turbo... That led to cab in the air , did injector's and found hi pressure pump failing, now have new fuel system, head bolts, glow plugs... Engine runs good and mainly just use it for pulling my Jayco 5th wheel... Love the power and stability of the dual wheels... Keep posting your fix issues so I'll have idea if I have similar... Live east of you in Western Montana... Thanks Jerry...
Own a 08 and had the alternator issue up till now. 260k miles and the low side turbo failed yesterday. Everything is bone stock, full egr and dpf in tact. I recently got the #8 glow plug fault. I'll look at harness while I am replacing the turbo this week. But all and all mine has been very reliable daily driver. Oil and filter changes is the key, now I'll full delete and hopefully run another 260k. Thanks
Ya, no surprise. On that turbo. Think of all that goop on those turbo fins going through that egr. Your turbo is a finely machined part that spins at incredible speed keeping balanced is critical to longevity. Getting all that goop all over the inlet fins is devastating and repeats performance as well it then increases carbon buildup in the cylinders and pistons and then out to the exhaust side of your turbos. A sure catastrophic event is imminent. Everything possible should be done to prevent this from happening. All this boils down to the economy and air quality. Beating any thing that the DPF can do. As reburn and regen is a toxic systems and should be banned. This is a failed solution. You know it they know it
I agree silver is my favorite color, but my F350 2010 is Duck Green which works with my super clean 88 Western wilderness Camper. Keep it up and don't get rid of that truck.
I have 2009 with original 10,000 on it, currently using renewable diesel. Supposed to be 80% cleaner so far no regens yet. They claim higher cetane and very clean burn, it does smell different.
Just had the oil cooler go out on 2008 F350 4x4. Bought the truck a year ago and it only had 82,000 miles on it. My wife worked at a Ford dealership that I got the truck from and was still able to put a 3 year factory warranty on the truck since the miles were so low. Thankfully the oil cooler was covered. The cab had to be removed to replace it. I'm guessing it would have been a 5 grand repair without it.
I have 135k miles on my 6.4 and have a couple of the same problems. I ❤️ the truck and have no plans on replacing it. I did replace the headlights with the new Morimotto LED lamps with DRL and they are incredible.
I know it's a bit of an old vid...... But I absolutely love both of my 6.4's. I bought my 2010 white ccsb 9 years ago. I pushed that truck for 3 solid years with all the bolt ons, 30%'s, 59/76's, and some hot mcc tuning on the mini maxx. Stock fuel.(stupid idea) I popped the motor on it myself with pride. She runs good now, lots of blood, sweat, tears and $$$$ later. While the white 6.4 was down I bought a red late 08 build dually. (In my profile pic) it got the same treatment. All the bolt ons, and the 59/76 snails off the white 6.4. But I ran dual k16's and 60's on it right off the bat. Some top end work, and ported rails, plus custom gearhead tunes. But bone Stock bottom end, and stock trans (other than tq converter.) Reached out to about 800whp before I said nope, no more, not pushing it. I run it on mild tuning everywhere, and while towing. I've went 80k miles on this setup (125kish on the truck) and no failures thus far. The trans will be the failure if anything. I'm surprised I haven't killed it yet. Maintenance, maintenance, maintenance!!! I cannot stress this enough! Deletes, maintenance, your tuning, and your right foot will usually determine the fate of your 6.4. Do not throw a 300 horse generic tune on and expect it to hold up to street races every other stoplight. Some do. Most don't. With brand new trucks coming out of the gate with over 500hp and 1000ft pounds of tq, reaching out to 800whp doesn't sound like a big deal. But when I took the dually (which looks stock outside of some wheels/tires) out and sent it down the track running 12.20's with it, it was extremely satisfying. Still dialing in the white one, before touting numbers. Overall, 6.4 life has been great to me. That said, I'm excited to send a truck or two down the rd. And pick up a new 7.3 gasser. Y'all take care 🤘
I have a 2009 f250 lariat with 180000 miles and the only problem I’ve ever had with it, was the torque convert and the rear seal. At that point I decided to upgrade the tranny since,IT, was in good condition, I went with a billet torque converter and deeper pan. Thru on an add a leaf kit and I love my truck.
I'm good with the deletes I've done she's a happy truck, pulls my toys, and hauls a good load when needed. As I have said I'm looking at a blend door issue. This one has me scratching my head. Maybe because I have to remove the passenger airbag. Boom.😮. Ya I know. Don't be afraid little kitty. Remember to disconnect the batteries. I've been told to let it sit through lunch. Something about residual power. Any help out there?
Thank you for this video. I have an 08 f450, used through a dealer, it had been a hot shot so a lot of changes had been done with the engine. I was have major problems like you said, but on mine it shut down, and would only idle. About the time I had it fixed I let a friend borrow it and they filled it with gas instead of diesel. So with putting in a new rebuild engine that fixed everything. Still learning about changing fuel filters, and minor repairs myself. Love the truck it's a work horse.
i own a 2008 f 350 lariat. 43200 miles on it. 1st thing i did when i bought it was to put new sinister turbos on it ( other turbos were fine) then a water filter. also put the def delete.i bought it used with 30000 miles on it. i love the pickup rarely drive it. but when i do it is great.no oil leaks
I've had mine since 2015, CC 4x4 SRW etc. So, I bought this to pull my 36' 5th wheel knowing that issues that were bound to crop up and a few have...such as the thermostats w/ temp sensor which shows the temp spiking almost instantly while pulling that 12,500 lb load on a very hot day. My tech scratched his head (and tickled his Snap-On diagnostic tool and made some calls) and we figured it out. The parts were cheap, the labor not so much since its a booger to reach. Now the trans can take some time to engage in drive, so on a hunch (and research and fingers crossed), I replaced the valve body, which encouraged me not to go on hunchs again since it still does the same thing. In researching that issue apparently, these auto transmissions are prone to having a bad ground (good grief) and can actually kill itself because of it. Regardless, now at 207k I still love this truck (had 50k on it when we bought it). Oh and a DPF delete at 100k with just the delete program, no issues w/ that. Just my 2cents.
I have an 08 6.4 F250. Bought it with 135K miles and the first thing I did was the DPF/EGR delete and added S&B cold air intake and SCT tuner. The tuner woke this beast up and it was fun driving. Way more torque than anything I owned before. later on, had the plastic radiator spring a leak and replace it with factory FOMOCO part. Next thing to go was the front brake caliper, replace both fronts calipers and rotors, next was the alternator burned up. I lifted the truck at 180K miles with a 6" BDS lift with leafs in the rear anf Fox shocks all around. Love the look of the truck lifted and I eventually added the BDS track bar to help with play and recently replaced the steering box with a Redhead box and it removed all the play from a truck with 220K miles and 37" tires. I did have a head gasket leak at 195K miles and did a cab off and replaced the head studs with ARP studs, redecked the heads and had the rocker arm assemblies replaced while the cab was off along with the normal things you'd do with a cab off such as replaced the up-pipe that had a leak. The rocker arm assemblies were actually in good shape and no cylinders where scorched. it's been running fine for the last 25-30K miles with no issues. I am religious about maintenance on the truck and do oil and fuel filter changes regularly and use Schaffer fuel all-season carbon treatment in the fuel. I'd say most of the repairs I've done are regular maintenance wear and tear stuff other than the cab off repair. I've been happy with the truck and knew what I had to do when I bought it. Key thing is regular maintenance and don't abuse it with heavy tunes if you haven't built up the other parts to handle the added power and boost.
Very nice looking truck. Love the dully in the 6.4 best My brother has two 6.4 trucks they work great after deleting as long as they were not washed out already when they were deleted. The problem with the dpf on them was the exhaust stroke being used to fuel the dpf witch washes the oil off the cylinder walls causing them to wear fast then lose compression. But the gm lmm engine had the same problem. Then some make it a long time with he dpf still on if they run nice and clean and if they are run dirty they are likely to blow up sooner.
i have a 6.4 that my dad bought brand new and its only been in a shop for thermostats... he put a intake, exhaust, and chip on at 30,000km and it now has 410,000km and still runs like a dream. front cover has a small slow leak that im gonna fix but other than the truck has been amazing and no other truck could touch it
I have also seen these front cover leaks from cavitation they develop a very small pinhole leak and make your head spin trying to find it lol 😂 good luck patching it let me know how it went
@@FullTiltGame better to replace than patch although I've seen someone do it in the past with 2 part epoxy but don't know how long it would hold up. Also don't know what coolant you are running but maybe you would like to drain it all and try running caterpillar coolant it is very good in fighting cavitation also delo long life works very well just stay away from the motorcraft coolant
@michael smith no they do know what to do but 6.4s are like the most difficult truck to work on so they don't bother because half the shit you gotta do to fix them the damn engine needs to be pulled for it to be worked on, that's why I got myself a 02 cummins
xyungx fr mines been running for 12 years now, we bought it used with 40k miles and deleted the egr and tuned it while putting a afe cold air intake on it. Its been running perfect for 10 years now with lucas racing oil👌.
My 6.4 is deleted 200k only issue i had was alternator went out at 164k miles still the original one. Main thing to do is oem fuel filters on time. Oem oil filter and oil changes on time and add zinc since rotella removed it from their recipe.
Thanks Taylor, l got my 08 450 last year and am now getting ready to do the egr and dpf delete. Had the same problem with my fan clutch plug when I replaced the radiator. They are a BA looking truck.
Great video bro! Stay strong 6.4! I also installed a coolant filter kit. I had read somewhere that our radiator also has some cast aluminum parts that breakdown some allowing the contaminates to flow through 🤷♂️. I believed it and installed a filter to help that out. Another collant problem I had was the driver side main line from the block only has 1 oring inside each end. Mine began to leak pretty bad over the course of a couple weeks. Luckily Motorcraft redesigned this line to have 2 orings on each end. So after a nice shower of coolant that has been replaced and never been an issue since! 126000 miles and still going strong!
I could have afforded a new one but zero regrets , in fact patting myself on the back , for investing in a 200k miles 1996 Navistar 7.3 to restore . 7 years and a few sensors later she still fires right up and goes wherever and does whatever every time knock on wood , them newer one sure are pretty though .
I drive an 08 550 as a company hotshot truck, stupid stuff breaks down all the time. They want to get rid of it. Ive told them theres nothing really wrong with it, just needs driven more than twice a year for less than 2000 miles. I love running that truck. The 6.4 with the 6 manual and 4x4 and crew cab. For a 550 it rides pretty nice, better than our 250. Way nicer than the volvo tractor i drive most all the time. Ive found over many years of turning wrenches and driving, diesels will breakdown for stupid reasons when their not run
I just bought one as well. I too did the research. I made the decision upfront I’m okay with swapping a Cummins into it later. I bought the truck not the motor and got a good deal on it!
I did my delete on the DPF and EGR installed the minor max tuner and set it for street performance to hall my trailer and I love my F 350. Other than the blendoor controller that has proven to be a real bear. I actually buttoned it back up hoping someone came up with a better solution 😢but I haven't see any yet. So I guess I'll have to get back in there. But I love my 2008 / 6.4. Oh ya. I put a S&B intake filter system in. The stock one was too restrictive. The change air filter kept coming on. The S&B kit fixed that. 😊.
I also have a 2008 f450 with the 4.88 diff. I am getting 13-14 mpg. Currious what you are getting. The pdf and egr are deleted but we left the egr cooler in place. But one issue I have seen is it is very sensitive to bad fuel and water in the fuel. I only have 38k on a new motor the previous owner blew the motor running with no coolant. I am running a cts tune stage 1. They did not offer a stage 0. My truck is also stretched and has 6 doors I've been from jasper park in Canada to key west pulling a 40 5th wheel. I love the 6.4 I had a 6.0 and hated it. I get better fuel economy with the 6.4 than the 6.0 pulling the same RV.
I'm a huge 6.4 fan, they just need to be improved with some quality aftermarket parts... I'm looking to find an f450 with a blown motor that someone doesn't want to mess with... Then I'll do what upgrades I trust
Totally sucks that you spend all this money for a diesel truck, and then you have to spend more money and break the law to get a reliable truck! I been following all this bs for a few years now. In 2017 I bought a new F450 dump truck, we got V10 gas job, les BS, less expensive to maintain too. Ya it only gets 6.5 miles per gallon, but it cost 8-9 k less to buy, regular gas less then “ clean diesel “ , no DEF fluid, and nothing to do to it. I run a construction company and when you study it from the money side, the diesel just doesn’t make much sense. Expensive BS. Touré
Last year I bought a '99 F250 V10. It had 137K miles on it. I really wanted a 7.3 diesel but it cost considerably more. Now, I'm so glad I got the V10. Runs great, has plenty of power, and from what I've learned since then, cheaper for everything.
Toure Foster And less work to try and take care of it especially with employees driving them. Gas motor can drive up and almost immediately be shut off with little to no consequence. Turbo diesel needs time to let the turbo cool and all the fluids or just kept running if you’re in and out of all the time. I have an obs 7.3 that has 315k and has started to give me issues but overall has been a reliable work truck. Gas trucks are better for start stop in and out all day.
That is what happens in the DPF. Some EU shops have installed a quick disconnect for the DPF can than doing a chemical soak seems to work. Also, there have been some results with removing the DPF can, and as long as the honeycomb isn't too badly plugged. Burning it out with a propane tiger torch and blowing high-pressure air through it has had variable results. Remember PPE is a must and only qualified persons familiar with these tools should attempt any of these procedures.
I have a 08 350 Lariat and only had minor issues(knock on wood). The biggest problem is RUST!!!! The rocker panels are going to need to be replaced and I’m currently getting estimates on a new bed. The bed rails are rusted away(under the bed that attaches to the frame). You have the same color I have. You got a sharp truck, I’d love to have a duly.
Thanks for the info on the horizontal EGR valve. I had my DPF delete done. I've reached out to my mechanic and shared your snippet on the EGR issue. I'm waiting on his reply.
Two of these issues in particular may appear to be self-inflicted, but consider the following:
1. A huge percentage of 6.4 owners who delete their DPFs never do an EGR delete, leaving the coolers in place as I had initially done. The rupturing of the horizontal cooler that I experienced was a result of the delete, however it is a legitimate issue that many owners have/will experience with the truck configured that way without the EGR deleted. As most people who are even slightly familiar with these trucks know, doing these deletes are IMPERATIVE to obtain any length of life out of these trucks.
2. The broken pin in the clutch fan harness which had affected the A/C system is just a pain to deal with in general. The connector is extremely difficult to disconnect as the metal prongs become virtually welded together over the years. Anybody that has done a serpentine belt change on one of these trucks knows exactly what I am talking about. I am certainly not the first, and definitely not the last person to separate a pin from this harness by accident. Yes, this was a mistake, but who knows if I could have ever gotten it apart without that pin slipping loose. This is a tough little problem to find and I wanted to include it in this video as it is a simple problem that will be overlooked 9/10 times.
This video was intended to be an honest and detailed account of my ownership thus far. Nothing more and nothing less. If this truck gives me bigger troubles down the road, they will be documented here on the channel. I have nothing negative to report at this time because nothing from the laundry list of issues that these trucks can experience have actually happened to me personally. Everyone has a 6.4 horror story. I'll wait to tell mine until it actually happens to me. We will see how long this truck lives for! Thank you for watching.
A buddy of mine had one and loved the 6.4 and actually now owns a 6.7 truck and really misses his old truck. Thanks for sharing your experience!
@@ericdavidson5011 Thank you!
Now that I've watched this vid, I need to delete my coolers. My dpf has been deleted for about 10k miles now I fear that they will rupture any second.
Taylor Smith, I also have a 6.4 but my biggest problem is that mine ran away after a turbo failure but I still have and is currently rebuilding it, luckily the engine is still in good shape and it is also completely stock with about 233,000 miles but now I’m getting it all deleted. I have been working on it for the past 6 months and just finally got it to start but only for about 15 seconds then it just shuts off and goes in to a crank no start and there a no codes popping up so I’m assuming it might be a fuel system issue
I special ordered my 2008 6.4 brand new with a rare 5 speed manual transmission. There were a few recalls done to the truck while still under warranty like the radiator with the plastic that you referred to in the video as well as one or two other things (all under warranty). At around 100,000 miles I had the Mini Maxx installed and had everything that needed to be eliminated deleted at the same time. At some time afterwards one of the pipes that connects to the turbo broke and the dealer welded in a new pipe. I won’t mention the dealers name to avoid any trouble but the Techs that work at the dealership where I bought my truck really know their shit and were able to give advice regarding the tune & delete at the time of implementation.
I too kept all of the deleted items in case I end up selling the truck someday (I doubt I’d ever sell it, though). Knock on wood, as far as I’m concerned the few things that have gone wrong with the truck never left me stranded in need of a tow. Through the years, the same as with any vehicle a few thousand dollars have been spent but I don’t have any horror stories to report. The oil and fuel filters are always changed simultaneously between 3 ,000 - 6,000 miles. The truck is lifted 4” which gives it an awesome looking stance while still allowing me to tow with my 5th wheel of ball hitch. The truck now has a little over 162K on the clock and still runs and looks as new.
I got a 08 f250 kingranch 6.4 246,000 miles, love it
Dillon Lawrence I’ve got a 08 6.4. I was wondering if you’ve had any issues and how long have you owned it. I purchased mine with 55k and deleted it soon after. It currently has 93k and I haven’t had any issues. Just wanted to see how your doing being yours had more miles
@@tjlift22 I havent had it very long, it was one of my best friends trucks so I've been around it for years. The motor blew up on him because of the emission controls so he rebuilt the whole thing and deleted it with aftermarket parts. I did have the capped egr pipe blow out so I deleted the whole pipe. Last weekend i had the transfer case blow up on me due to the front drive shaft going out. If you lose power, it's most likely one of the up pipes for the turbos. If you feel the truck start vibrating when your driving pull over immediately and unbolt your front drive shaft, I made the mistake of letting it go and now the trucks down until I can dish out 1500 on a new transfer case. I love the truck and it's worth every problem I've had though.
How many rebuilds 2 or 3?
Dillon Lawrence I’ve got an 08 f250 as well. Everything is stock and it’s currently at 270k going strong
I have the same tuck mentioned in this video. Over 250K. BONE STOCK! I pull big horse trailers and very big Teton Homes 5th wheel with it. The truck has amazing power. I still own a N/A 6.9 that I bought in high school, a N/A 7.3 and a Powerstroke 7.3 as well. I've owned two 6.0's. One of those went bang at 37,000 miles. The other one had just over 200 trouble free when I sold it. The 6.4 has had a few problems. Mostly cooling system related and not major. I personally think you can avoid most problems with these trucks by using them as they were designed. In other words, keep them warm/hot. These are not designed to be grocery-go-getters or commute cars. They are designed to haul. You can let an old 6.9 or 7.3 idle with the a/c on for a week and not hurt it. You idle any modern diesel for more than a few minutes and you'll have problems. Those twin turbo chargers provide an excellent balance of power at the low end and high end. Is it possible that the motor will become a boat anchor somewhere down the road? Sure. But my truck has been paid off for a long time and I use it for what it's designed to be used for. I suspect it will give me another 100K to 150K before I think about a rebuild.
It's a beautiful looking truck. Smart man not paying 75 grand for a new one.
Fuck that truck 6.4 blow. Buy a new body style 6.7 for 40k
That's not smart, that's just opinion
FordFan01 umm yea its smart ... good luck finding a core for a 6.4 they are basically all gone
@@FordFan01 no...its smart
@@todda8695 its smart not buying a $75,000 truck. It's not smart buying a truck that has a junk engine in it. Anyone you talk to that works on diesels will tell you the 6.4l PS is a junk engine, just buy a different engine.
Bought my 2008 6.4 with 105k miles, transmission went out one week later; replaced transmission and have not had a problem since. 175k miles now, has a tune, dpf and EGR delete. I love the truck
My 1996 7.3 has over 340,000 miles and going strong
After 3 factory primary radiator failures, I purchased S&B body mounts and mishimoto primary radiator, on my f250 6.7. No more radiator problems and the S&B mounts, makes the truck feel like you are driving a new truck. Good luck and great channel sir.
I'm on your side bud got a 2010, bought used and derated at the time. Took a gamble removed all the emissions off the truck put a simple gearbox z tune it's been a blessing every since. Still have a few things I'm working through but its to be expected like you said. Keep up the channel please.
Also curious
I didn’t do as much research it as I should of on the 6.4 before I bought. but after hearing some horror stories after I bought it, I was happy to find your post. I think I got lucky, the truck had 109,000 miles on it, the previous owner took great care of it inside and out. After watching your videos I ordered the replacement exhaust and the EGR delete kit plus the minimax tuner. Looking forward to seeing the oil stay clean for longer then 100 miles after I change it. Thanks again please keep posting!
Says he's not a mechanic but actually knows more then most "mechanics" I know from shops
I have a 2008 F450 Harley edition. It was fully deleted at 36000kms and I studded it without pulling the heads (original head gaskets) at 136 000kms. I've put some minor upgrades throughout the years . Truck has treated me great and I keep up with good servicing.
Proper frequent services prevent most failures.
Have had great luck with my 2008 F-250 with the 6.4 oil changes and fuel filters! That’s been my key to success. Not a single issue
No deletes or anything? I'm considering buying a 2009 with 144k today.
When tuning with the Mini Maxx after a full delete on a 6.4L, make sure you DO NOT choose the “easy” tune as it will try to cycle the EGR valve and you will still get the wrench symbol trouble code. You need to select either the “mild” or “HD300” tune in order to be trouble code free..
Make sure you are clearing the water separator (located on the driver side frame, about halfway down the truck, looks like a black box with a little tube coming out of it.) Draining this of water until you see only diesel fuel coming through. Forgetting to do this can cause water to get into the engine, and thats just a bad time for anyone.
Beautiful truck! I have a 2008 F250 and deleted everything at 32k miles. I love my truck. I have the H&S mini max and 99% of the time set it on "no power" and when towing I set it on "mild" as to not overload/hurt the trany/turbo due to the fact the original factory components were not designed for the added HP and torque. Oil, oil filter, fuel filters and coolant cap changes every 3k miles. Coolant flush/replacement every 2-3 years is key to protecting the "wet sleved" engine.
Nice truck. I have 2 of the 6.4's. One is a 2008 F250 which I bought with about 150,000 miles on it, but it had already been deleted, and had been well taken care of. I've put well over 60,000 miles on it with no issues. Also have a 2008 F350 that wasn't in great shape when I bought it, and I had a local diesel mechanic do the delete on it. However, it was too late. On a trip to Wyoming hauling some stuff, I lost the engine. Cracked pistons, the whole nine yards. Moral of the story is religious maintenance and servicing. I love my 6.4.
99% of people that talk bad about these truck never had one, they can be great trucks. 331000 on mine when sold, two alternators that was the only problem I ever had, I have moved on to the 6.7, love the truck but never will it make the power my 6.4 did
The 6.7 has way more power
@Camo maybe so now. I've never driven a tuned 6.7 newer than a 2014, but up until then I still have to say 6.4. Smoked several 6.7 with my 6.4 including the 6.7 I have now. I've have owned all powerstroke from 1995 to 2014. The 6.4 was a bad ass. Just my
Opinion
99 percent never had one. There's a reason why.
Bought one brand new in 2010 the last year the 6.4. The only thing I replaced on the truck is the alternator that’s it. I know other people have had problems with them, but I have had zero problems with my 6.4 power stroke@@kennycopeland282
How much power did ur 6.4 have
Tyler Smith I really appreciate the step by step on the videos , I also have a 2010 6.4 Harley Edition close to 150 k miles , my first Diesel truck and didn't know the Headache that came with owning a 6.4 , I'm in the process for doing the delete on it , so I learned quite a bit watching your videos ,
Thanks again .
i got one sitting in my drive way (2010 6.4 HD Edition) 35000 miles, it's got a bad cam and lifter, fucking junks
Thanks again, doing my deletes this week. Full egr, down pipe back and Livewire tuner. You have been a blessing my friend. Much appreciated!
The biggest problem i see is from neglect. Frequent oil changes with synthetic oil and coolant replacement with the Motorcraft coolant additive is key. Heavy tunes and abuse are also tough on a 6.4.
Remove the valve covers and check the rocker arm tips for wear every 50.000 miles and replace as necessary.
I have seen these engines last 300.000 and more with proper care.
Most of the "know it alls" have been trained by UA-cam and the internet and have never had the hood open on one.
Yeah dude drop a grain a sand in the oil filler and the engine explodes
They run great after a tune dpf and egr delete
Lol. That’s why Powerstokehelp will no longer work on these engines because they are so reliable. Never seen one with 300 with the factory engine.
Fonzie Shoots get after market rockers and pushrods our 5 in our fleet rockers didn’t have oil holes and ford told us it wasn’t necessary
Front covers always have cavitation. Turbos are Junk. There’s a reason Navistar only put a single on these things. They make crazy power. To me they are the nicest body style but that engine is a boat anchor
So basically what I’m getting from this is that with a full EGR delete and proper maintenance it’s a solid engine bc the system can’t really tear the engine apart. I’m thinking of getting one but I’m a little worried about having a bad experience with it.
Don’t buy a 6.4 it’s a throw away engine. There is a lot more wrong than just the emissions system.
Buy a 6.0 instead, if you want an engine with almost 0 issues after you delete and put gaskets and studs into it
At 142000 miles my 09 6.4 grenaded. The #8 piston cracked. I spent the money for a re-manufactured engine. It runs great. I have a warranty on the engine and I still love the truck. It was a lot of money and it hurt, but to sell it and buy a new one would have been even more money.
@Trae Thibodeaux It was deleted around 129000 miles. But lets face it, it had spent too much time with the DPF and EGR. I knew this could happen before I bought the truck, but it still sucked. Now the truck runs great. It has the Jasper reman engine. It is also studded. I have no reason to believe I can't get 200000 miles out of her.
@Trae Thibodeaux Also I didn't mention this but it grenaded when I was pulling a 10000 lb. camper up a fairly steep incline in Wisconsin.
We're you doing a lot of towing prior to the failure?
@@bcbp14 Oh yea. 10,000 pound camper up and down hills in Wisconsin for hundreds of miles.
@@stevenwilson3368 any prior indicators? Like ticking or knocking? Funny noises etc?
Dude ! Perfect. I have a 6.4 as well. All the same issues you addressed I had to fix. The one I had problems figuring out I think you mentioned .. the fuel rail pressure sensor. The symptoms you had are similar to mine. When it’s hot , In gear , at full stop or at a red light ... I hope this will fix my idle as well! Either way thank you Taylor! Appreciate.
I’m changing my fuel filters and adding a fuel stabilizer will this generally work ?
I thank you Taylor,i have an older F250 with a 6.0 and heard all the crap from people as well ,but I have had ZERO issues with it
Awesome video! My 6.4 is a love hate relationship but it's been an awesome learning experience.
Love my 6.4 at 180k miles. Deleted since 112k. No issues
I have an ‘08 I bout last year and absolutely love it. I knew going into it as well and had no problem at all. I put the H&S tuner, deleted and straight piped with coolant filter, db venom uplift pump, mishimoto oil catch can, banks intercooler and pipes. She pulls my dump trailer and bobcat beautifully.
Brother has a 08 6.4 With 350,000 miles. Only has DPF delete and it still runs like a champ
Great video. I also have the 2008 6.4 and have had only normal wear and tare issues. Alternators. Radiator. Turbo rebuild. After reading forums and freaking out that I kept blowing coolant out the degas bottle and I have mine tuned I was convinced I blew my head gaskets. The ford dealer told me to keep in mind, you’re reading blown head gaskets from all over the world, guys who tune their rigs and sit in parking lots red lining the RPMS and turbos doing donuts over and over and beating the HELL OUT of their trucks then wondering why it’s blown and blaming the 6.4. He said blown head gaskets on the 6.4 is extremely rare. Turned out that after 260,000 PROBLEM FREE miles my turbo needed rebuilding. The pressure leak is what was causing my coolant to blow through degas bottle. NOT BLOWN HG’s, blocked oil cooler. I’ve pulled over-loaded dump trailers that the combined truck trailer and load was 34,500 no problem. That was one time and didn’t realize it was that heavy till I hit the scales. The ford techs will tell anybody if these rigs are PROPERLY MAINTAINED they are fantastic engines, more power than any regular contractors need. They’re correct. Mine is pushing 300,000 and I bought it with 112,000 a few years ago. Driven every day and worked like crazy. I love my King Ranch and have NO PLANS except when the day comes I will be dropping in a Cummins conversion. Truck still looks brand new, leather is top notch. I can’t say enough about the truck and I still get TONS of compliments and yes the truck is untouchable here in Portland, Or. dodges have tried to take me, they can’t, chevys, I eat them up. I’ve raced maybe 7-8 guys in their dodges and chevys at lights and have smoked them all, with ease.
Could you clarify where the pressure in the cooling system was coming from? I have a 6.4 and experiencing the same thing believing it must be head gaskets. If its from the turbo how is it pressurizing the coolant system? Thanks
Take a chill pill. Unless this truck is a professionally modified race truck your asking for huge time out, and $. I know the temptation is hard to resist. However, the performance and reliability to show up on the job site is the win. Not red light to red light.
Hey Brother great job on the jumper wire for the fan clutch-you could’ve been chasing your tail on that entire issue & wasted not only $$$ but good ac parts as well - jumping down a Rabbitt hole can be very costly-anyway thanks for your time,btw im a die hard Chevrolet fanatic as well as a self employed Mobile Diesel Mechanic for the last 27 years & i get great tips from your videos as I have customers w/2008,09&10 6.4l power strokes-thanks again you do a great job in your clear & audible speech,detail & down to earth common sense.🤙
I bought my 6.4 new in summer of 2007, I have a 2008 F350 SRW 4x4. It’s been great. Only things wrong have been:
Twice had to replace radiator due to side tanks leaking because of the frame flexing & twisting from being off road.
The exhaust sensor 8C3Z-12B591-E I’ve had to replace 3 times so now I carry a spare cause it throws it into limp mode.
Alternator at 100,000
& that’s it. I have 110,000 miles now 14 years later & runs great
Did you ever find out what was causing the issue? I’m having similar issue with truck going into limp mode unsure of its that sensor
I use the Harbor Freight code reader to see what the problem is & to clear the code after I fix it
SEE GUYS. Fords can last a long time! Most people would ignore a check engine light but that what's why they fail. So long as you keep up with oil and filter changes every 5k or so, fuel additives, routine wash, diaper change, and air filters you should have very few problems.
So more junk. By ford nothing new
I have an 08, F-350 6.4, Full Delete. Absolutely incredible truck.
I just bought a 2008 f-350. Quick question for you. Shall I get the egr tune done first, or do the delete first? My tuner lives about 20 miles away.
@@garysmith5741 do both. FULL DELETE
Taun Jameson I was asking shall I do the actual work of deleting the erg first it shall I do it after it’s been tuned?
@@garysmith5741 so the EGR has to be removed first. When you pull the re-gen system, as soon as you start it, it will throw a code into the computer system. When you turn on your tuner for the first time, it will ask you about both deletes, and will turn off those codes. I took mine into a shop, they did both deletes at the same time, then did a 'tow tune' flash to the on board computer.
@@garysmith5741 do both deletes, then install the tuner, and go through the tuner install before you start your truck
Same story, 2008 Grandpa truck (Lariat CCSB, RWD). Bought it for a song from a Ford dealership because it had a broken Y-pipe. I was able to replace that, delete the DPF and EGR and tune it for less than $500. This was all with the cab on, as I have skinny arms and tiny hands, and an excellent sawz-all. It's worth more now than I paid for it, but as long as SWAMBO keeps her travel trailer, I'm keeping Grandpa.
Just found your channel great to finally find someone that knows the 6.4 intimately now I hope I can keep following you for as long as you keep your truck. But I will keep mine forever or something catastrophic happins. As always keep the shiny side up 😊
Nice video. Thanks and I appreciate the information. I bought a 2008 F350 Lariat 6.4 diesel in January of 2019 with 119k miles. Within a month and around 121k miles, the wiring harness located above the HPFP went bad and had to be replaced which meant lifting the cab. I went ahead and had the HPFP replaced at the same time. I had a warranty that covered half the cost. Since then, I have had no major problems. The truck runs very well. I do maintain and take care of my vehicles and do regular maintenance at the local Ford shop. Current miles is around 126k miles. I do use a fuel additive (Archoil products). It goes through a regen about every 200-300 miles and recently it has done a regen at the 400 mile point. Overall, this truck runs very well.
@2lapsdownpodcast Yes, still running great. Had to get some brake work done and replace some brake lines, but some of these things come with age. Otherwise, the truck is still running great.
Ive owned mine for 3 years. I got the truck with 66k miles on it and as of this moment it has 75,xxx on it and it has been sitting for 5 months. Truck has blown head gaskets, a messed up transmission, and steering problems. The owner before me abused the shit out of it and now i am stuck with it. I only paid 8k on iaa salvage auction because a tree fell on the cab. I bought the truck at 17 while i was still in school and me and my dad spent 2 weekends swapping the cab and interior as well as both passenger doors and the hood. I gave it a few months saved my money and had the truck deleted. While i was waiting on the rebuilt title to come in after it took 6 months to get a new vin plate. The truck was running good (I assumed). The first thing I noticed when i started driving it was the steering was loose and the transmission made a chattering noise but shifted fine. Then one day getting on the interstate i was driving and stepped into it and a buddy of mine was behind me, he called me on the phone and told me that the truck had just shot coolant out the driver side fender well. The truck has never overheated since ive owned it. After that happened I replaced every component of the cooling system and it didnt fix it, coolant was still disappearing slowly. Then the transmission shit the bed. So here i am 20 years old with a truck that i dont have the money to fix and if i sell it i wont get much out of it. I hope you have better luck with yours than i have mine
There is a plate on the front of the engine if you don't keep the coolant up with good diesel engine antifreeze it will pitt and cause serious damages. Check for coolant in the oil. Get it out of there fast my repair coast me 3K. It started with coolant going down for no obvious reason then I started using strait water. This was 2018. No trouble since. But I got lucky. Real lucky
I drive a 6.4 that had a lot of goodies added early in its life. 313000 kms and it still blows away new trucks. F450 King Ranch. Almost at 900 ft/lbs
I’m planning on getting a 2010. Going to run the 6.4 into the ground and then swap a 24v into it once it dies.
Or…. Now hear me out, use that money to build your 6.4 from choate or kdd and skip out on the wimpy 24v
@@mutanay77 Because I can pull the 5.9 for like 1000$ and have a more reliable platform than even a built 6.4. To make them reliable you have to go billet and you’re talking about $30,000+ in a motor. I can blow up nearly 30 5.9s before I match the total. Plus it’s a f450 so it’s really meant for hauling/towing and Cummins is king for that. I’m not pulling sleds, just some skid steers and excavators and HDPE
@@BigBlockOverland well you’re not wrong on the grand for a 5.9. But I daily a 6.4 for 2 years now and a simple delete and tuning is all I need. And if you want to go built the max is like $15K from choate or kdd. Not 30k
@@mutanay77 not bad pricing if it’s billet. We have bullet proofed 6.0s and 6.4s in our fleet and they’ve been great and can pull like hell with a conservative tune, but, I’ve seen some swap videos that made me want to do the swap. Especially the ones from Taylor Ray. I just want to engage the challenge to do it to have something different and easy as heck to work on.
I drive a 2010 F 450. 67000 miles. Blew a turbo boost boot is all. Just did the re-gen delete. Last week, changed the thermostats. .. one was sticking closed. Had a small pinhole leak on to- radiator hose. Haven’t checked yet but I’m thinking I’m getting 4-5 mpg better. Was getting about 11 ....up , down and around the hill. Running a 4” pipe off factory muffler.
I’ve had my 6.4 For five years knock on wood no issues other than a couple of things I have done myself which I fixed very easily
Just picked up a well used 2008 F350 to be the "junk truck", used for towing or taking things the dump or other things the daily driver can't or shouldn't do. Former fleet truck, chassis cab with 9' Knappheide utility body and 1,300lbs Tommy Gate. Previously used by Thyssen Krupp elevators.
Had it delivered to a mechanic to be gone over before putting it back on the road and he was blown away about how good the 6.4L ran. Fully stock except for an aftermarket fuel filter cap. 206k miles. But, now I'll know what to keep an eye on!
I appreciate your videos on the 6.4 powerstroke. I bought a 2010 lariat 250 with 59k on it a few months ago and it was based on a few of you guys with level heads and experience with them. I know people absolutely hate them and have yet to find one of those haters in person that actually owned one. thanks for no bs videos.
I had one till 305k miles.... everyone is a genius mechanic online
I have a 2010 6.4 with 412,000 on it. Have only ever changed oil and coolant per service manual and a serpentine belt. Nothing ever has happened to mine. Makes me believe most people with problems either beat theirs or are shitty with maintenance
Mine was maintained from day one by Ford every 5k miles and it killed 2 short blocks before 75k miles. It was 100% stock and never towed near its max capacity. 🤷♂️
THANK YOU for problem number 4!!! I have been having the same exact issue with my ‘08 F250 it runs cold on the highway but at idle it blows just not cold air. You are the only person that has mentioned the exact same problem. I will have to check to see if that is the same issue on mine. I have also had to switch out the alternator and I’ve had issues with the glow plugs as well. It was also glow plug number 8 that was throwing a code. We just went ahead and switched out all the glow plugs and wiring.
Honestly, I love my 6.4 😁
Maintenance is the key to every vehicle all makes and models I have a 6.4 and love it and I have a 2012 6.7 and the 6.4 Will run circles round a 6.7 and even out tow it to
My last problem with my 08 F250 was a high pressure fuel pump cable/connector that required the cab removal - $3,000 to replace $50 part.... I love the truck by it takes courage to own one.
I love my truck...no major issues for the last 8 years 🤞🏽😎
Again awesome video thanks for taking the time
My daily a f-350 4 door flatbed 6.4 6 speed manual. It tows 15k 3-4 days a week. Truck deleted with less than 10k miles on it. I love the it.
I just sold my 2009 6.4 and it was a great truck for me. 319,000 miles. Super strong engine
I have an 08 as well since 2012. Ive had to do many things to her, but she runs great now. Gotta make those mods.
Enjoy your videos, I have F-450 , bought it bout same time as you, had 91000 miles,new to the power stroke family... Had dpf delete with the mini max, I removed egr system, but had exhaust leak in up pipe to turbo... That led to cab in the air , did injector's and found hi pressure pump failing, now have new fuel system, head bolts, glow plugs... Engine runs good and mainly just use it for pulling my Jayco 5th wheel... Love the power and stability of the dual wheels...
Keep posting your fix issues so I'll have idea if I have similar... Live east of you in Western Montana... Thanks Jerry...
I've had mine for 6 years 2009 f350 o problem 132 thousand miles good truck to me . Good helpful video
Own a 08 and had the alternator issue up till now. 260k miles and the low side turbo failed yesterday. Everything is bone stock, full egr and dpf in tact. I recently got the #8 glow plug fault. I'll look at harness while I am replacing the turbo this week. But all and all mine has been very reliable daily driver. Oil and filter changes is the key, now I'll full delete and hopefully run another 260k. Thanks
Ya, no surprise. On that turbo. Think of all that goop on those turbo fins going through that egr. Your turbo is a finely machined part that spins at incredible speed keeping balanced is critical to longevity. Getting all that goop all over the inlet fins is devastating and repeats performance as well it then increases carbon buildup in the cylinders and pistons and then out to the exhaust side of your turbos. A sure catastrophic event is imminent. Everything possible should be done to prevent this from happening. All this boils down to the economy and air quality. Beating any thing that the DPF can do. As reburn and regen is a toxic systems and should be banned. This is a failed solution. You know it they know it
So nice to find this kind of information about the 6.4's
I agree silver is my favorite color, but my F350 2010 is Duck Green which works with my super clean 88 Western wilderness Camper. Keep it up and don't get rid of that truck.
Thanks for a positive video on the 6.4 and the your experiences.
I have 2009 with original 10,000 on it, currently using renewable diesel. Supposed to be 80% cleaner so far no regens yet. They claim higher cetane and very clean burn, it does smell different.
Told you it was solid when you bought it, glad to see its held strong. Ole Bob's Cummins is still doing everything I ask of it no problem.
Can’t even compare any Cummins to the 6.4
Just had the oil cooler go out on 2008 F350 4x4. Bought the truck a year ago and it only had 82,000 miles on it. My wife worked at a Ford dealership that I got the truck from and was still able to put a 3 year factory warranty on the truck since the miles were so low. Thankfully the oil cooler was covered. The cab had to be removed to replace it. I'm guessing it would have been a 5 grand repair without it.
I have 135k miles on my 6.4 and have a couple of the same problems. I ❤️ the truck and have no plans on replacing it. I did replace the headlights with the new Morimotto LED lamps with DRL and they are incredible.
I know it's a bit of an old vid......
But I absolutely love both of my 6.4's.
I bought my 2010 white ccsb 9 years ago. I pushed that truck for 3 solid years with all the bolt ons, 30%'s, 59/76's, and some hot mcc tuning on the mini maxx. Stock fuel.(stupid idea)
I popped the motor on it myself with pride.
She runs good now, lots of blood, sweat, tears and $$$$ later.
While the white 6.4 was down I bought a red late 08 build dually. (In my profile pic) it got the same treatment. All the bolt ons, and the 59/76 snails off the white 6.4. But I ran dual k16's and 60's on it right off the bat. Some top end work, and ported rails, plus custom gearhead tunes. But bone Stock bottom end, and stock trans (other than tq converter.) Reached out to about 800whp before I said nope, no more, not pushing it. I run it on mild tuning everywhere, and while towing. I've went 80k miles on this setup (125kish on the truck) and no failures thus far. The trans will be the failure if anything. I'm surprised I haven't killed it yet.
Maintenance, maintenance, maintenance!!! I cannot stress this enough!
Deletes, maintenance, your tuning, and your right foot will usually determine the fate of your 6.4. Do not throw a 300 horse generic tune on and expect it to hold up to street races every other stoplight. Some do. Most don't.
With brand new trucks coming out of the gate with over 500hp and 1000ft pounds of tq, reaching out to 800whp doesn't sound like a big deal. But when I took the dually (which looks stock outside of some wheels/tires) out and sent it down the track running 12.20's with it, it was extremely satisfying.
Still dialing in the white one, before touting numbers.
Overall, 6.4 life has been great to me.
That said, I'm excited to send a truck or two down the rd. And pick up a new 7.3 gasser.
Y'all take care 🤘
I have a 2009 f250 lariat with 180000 miles and the only problem I’ve ever had with it, was the torque convert and the rear seal. At that point I decided to upgrade the tranny since,IT, was in good condition, I went with a billet torque converter and deeper pan. Thru on an add a leaf kit and I love my truck.
Great videos. Thank you for being real. 08 250 with reading utility bed and snowdogg plow. Deleted and love it
I love that body style of the f450, it looks aggressive. I would like to get one but keep hearing the issues and get look at other trucks
I'm good with the deletes I've done she's a happy truck, pulls my toys, and hauls a good load when needed. As I have said I'm looking at a blend door issue. This one has me scratching my head. Maybe because I have to remove the passenger airbag. Boom.😮. Ya I know. Don't be afraid little kitty. Remember to disconnect the batteries. I've been told to let it sit through lunch. Something about residual power. Any help out there?
Thank you for this video. I have an 08 f450, used through a dealer, it had been a hot shot so a lot of changes had been done with the engine. I was have major problems like you said, but on mine it shut down, and would only idle. About the time I had it fixed I let a friend borrow it and they filled it with gas instead of diesel. So with putting in a new rebuild engine that fixed everything. Still learning about changing fuel filters, and minor repairs myself. Love the truck it's a work horse.
i own a 2008 f 350 lariat. 43200 miles on it. 1st thing i did when i bought it was to put new sinister turbos on it ( other turbos were fine) then a water filter. also put the def delete.i bought it used with 30000 miles on it. i love the pickup rarely drive it. but when i do it is great.no oil leaks
I've had mine since 2015, CC 4x4 SRW etc. So, I bought this to pull my 36' 5th wheel knowing that issues that were bound to crop up and a few have...such as the thermostats w/ temp sensor which shows the temp spiking almost instantly while pulling that 12,500 lb load on a very hot day. My tech scratched his head (and tickled his Snap-On diagnostic tool and made some calls) and we figured it out. The parts were cheap, the labor not so much since its a booger to reach. Now the trans can take some time to engage in drive, so on a hunch (and research and fingers crossed), I replaced the valve body, which encouraged me not to go on hunchs again since it still does the same thing. In researching that issue apparently, these auto transmissions are prone to having a bad ground (good grief) and can actually kill itself because of it. Regardless, now at 207k I still love this truck (had 50k on it when we bought it). Oh and a DPF delete at 100k with just the delete program, no issues w/ that. Just my 2cents.
I’m looking at a 08 with 73k mikes on it. Beautiful truck. Thinking about getting it. Would you do it again or not?
I have an 08 6.4 F250. Bought it with 135K miles and the first thing I did was the DPF/EGR delete and added S&B cold air intake and SCT tuner. The tuner woke this beast up and it was fun driving. Way more torque than anything I owned before. later on, had the plastic radiator spring a leak and replace it with factory FOMOCO part. Next thing to go was the front brake caliper, replace both fronts calipers and rotors, next was the alternator burned up. I lifted the truck at 180K miles with a 6" BDS lift with leafs in the rear anf Fox shocks all around. Love the look of the truck lifted and I eventually added the BDS track bar to help with play and recently replaced the steering box with a Redhead box and it removed all the play from a truck with 220K miles and 37" tires. I did have a head gasket leak at 195K miles and did a cab off and replaced the head studs with ARP studs, redecked the heads and had the rocker arm assemblies replaced while the cab was off along with the normal things you'd do with a cab off such as replaced the up-pipe that had a leak. The rocker arm assemblies were actually in good shape and no cylinders where scorched. it's been running fine for the last 25-30K miles with no issues. I am religious about maintenance on the truck and do oil and fuel filter changes regularly and use Schaffer fuel all-season carbon treatment in the fuel. I'd say most of the repairs I've done are regular maintenance wear and tear stuff other than the cab off repair. I've been happy with the truck and knew what I had to do when I bought it. Key thing is regular maintenance and don't abuse it with heavy tunes if you haven't built up the other parts to handle the added power and boost.
Head studs are a must.
Very nice looking truck. Love the dully in the 6.4 best
My brother has two 6.4 trucks they work great after deleting as long as they were not washed out already when they were deleted.
The problem with the dpf on them was the exhaust stroke being used to fuel the dpf witch washes the oil off the cylinder walls causing them to wear fast then lose compression. But the gm lmm engine had the same problem. Then some make it a long time with he dpf still on if they run nice and clean and if they are run dirty they are likely to blow up sooner.
Great video Taylor and I appreciate your comments and love that truck. I am in the process of purchasing one
i have a 6.4 that my dad bought brand new and its only been in a shop for thermostats... he put a intake, exhaust, and chip on at 30,000km and it now has 410,000km and still runs like a dream. front cover has a small slow leak that im gonna fix but other than the truck has been amazing and no other truck could touch it
I have also seen these front cover leaks from cavitation they develop a very small pinhole leak and make your head spin trying to find it lol 😂 good luck patching it let me know how it went
@@foxbodyguyeightyeight3672 Yes sir, its shitty. thanks but haven't done it yet, currently seeding.
replace not patch i thought
@@FullTiltGame better to replace than patch although I've seen someone do it in the past with 2 part epoxy but don't know how long it would hold up. Also don't know what coolant you are running but maybe you would like to drain it all and try running caterpillar coolant it is very good in fighting cavitation also delo long life works very well just stay away from the motorcraft coolant
@@foxbodyguyeightyeight3672 Yes i will do that
I have a 190k on my 6.4 and with a medium tune and its 630hp it runs like a champ and I rip it everywhere soooo
How it going now ?
215k still running strong as ever. My trucks been pretty trouble free.
@@levidye5701 wow maybe lucky or actually took care of it! But that’s awesome bro! Okay boosting my confidence in looking for one
I own a 2008 f-350 6.4 with 294,000 and it's still running strong
Every 6.4 owner “ik it’s reputation is bad but ik what todo to it”
haha
good, and that's why some last hella long because they do know
@michael smith no they do know what to do but 6.4s are like the most difficult truck to work on so they don't bother because half the shit you gotta do to fix them the damn engine needs to be pulled for it to be worked on, that's why I got myself a 02 cummins
xyungx fr mines been running for 12 years now, we bought it used with 40k miles and deleted the egr and tuned it while putting a afe cold air intake on it. Its been running perfect for 10 years now with lucas racing oil👌.
On my 7th 6.4 all of them going strong still 4 are over 300k. I love these comments It makes get them even cheaper!
just something about the look of the 6.4. love this truck
I work in the oilfields pulling 3 8nch iron in the mud with mine. I literally can break a ball bearing(ask my grandpa) and that truck is tough.
My 6.4 is deleted 200k only issue i had was alternator went out at 164k miles still the original one. Main thing to do is oem fuel filters on time. Oem oil filter and oil changes on time and add zinc since rotella removed it from their recipe.
Thanks Taylor, l got my 08 450 last year and am now getting ready to do the egr and dpf delete. Had the same problem with my fan clutch plug when I replaced the radiator. They are a BA looking truck.
I have a 2008 6.4, I'm rebuilding right now. With Ported intake, new fuel injectors, pistons, everything
Great video bro! Stay strong 6.4!
I also installed a coolant filter kit. I had read somewhere that our radiator also has some cast aluminum parts that breakdown some allowing the contaminates to flow through 🤷♂️. I believed it and installed a filter to help that out. Another collant problem I had was the driver side main line from the block only has 1 oring inside each end. Mine began to leak pretty bad over the course of a couple weeks. Luckily Motorcraft redesigned this line to have 2 orings on each end. So after a nice shower of coolant that has been replaced and never been an issue since! 126000 miles and still going strong!
Love my 2010 f350 w/ 6.4l and minimax tuner. Keep making the vids great job.
I love my minimax
I could have afforded a new one but zero regrets , in fact patting myself on the back , for investing in a 200k miles 1996 Navistar 7.3 to restore . 7 years and a few sensors later she still fires right up and goes wherever and does whatever every time knock on wood , them newer one sure are pretty though .
Thank you so much for this video. I've had some of the same problems with my 2010 f350.
I like how you address the problem that are part of the truck not engine, all so you keep it nice and clean, good luke
Thank you Taylor you are super kind and awesome this is definitely putting me in the right direction to fixing one of my customers trucks
I drive an 08 550 as a company hotshot truck, stupid stuff breaks down all the time. They want to get rid of it. Ive told them theres nothing really wrong with it, just needs driven more than twice a year for less than 2000 miles. I love running that truck. The 6.4 with the 6 manual and 4x4 and crew cab. For a 550 it rides pretty nice, better than our 250. Way nicer than the volvo tractor i drive most all the time.
Ive found over many years of turning wrenches and driving, diesels will breakdown for stupid reasons when their not run
I just bought one as well. I too did the research. I made the decision upfront I’m okay with swapping a Cummins into it later. I bought the truck not the motor and got a good deal on it!
I did my delete on the DPF and EGR installed the minor max tuner and set it for street performance to hall my trailer and I love my F 350. Other than the blendoor controller that has proven to be a real bear. I actually buttoned it back up hoping someone came up with a better solution 😢but I haven't see any yet. So I guess I'll have to get back in there. But I love my 2008 / 6.4. Oh ya. I put a S&B intake filter system in. The stock one was too restrictive. The change air filter kept coming on. The S&B kit fixed that. 😊.
Had one with minimaxx, DPf, egr delete... took it up to 305,xxx and sold it (still ran healthy)
I also have a 2008 f450 with the 4.88 diff. I am getting 13-14 mpg. Currious what you are getting. The pdf and egr are deleted but we left the egr cooler in place. But one issue I have seen is it is very sensitive to bad fuel and water in the fuel. I only have 38k on a new motor the previous owner blew the motor running with no coolant. I am running a cts tune stage 1. They did not offer a stage 0. My truck is also stretched and has 6 doors I've been from jasper park in Canada to key west pulling a 40 5th wheel. I love the 6.4 I had a 6.0 and hated it. I get better fuel economy with the 6.4 than the 6.0 pulling the same RV.
I'm a huge 6.4 fan, they just need to be improved with some quality aftermarket parts... I'm looking to find an f450 with a blown motor that someone doesn't want to mess with... Then I'll do what upgrades I trust
Totally sucks that you spend all this money for a diesel truck, and then you have to spend more money and break the law to get a reliable truck!
I been following all this bs for a few years now. In 2017 I bought a new F450 dump truck, we got V10 gas job, les BS, less expensive to maintain too.
Ya it only gets 6.5 miles per gallon, but it cost 8-9 k less to buy, regular gas less then “ clean diesel “ , no DEF fluid, and nothing to do to it.
I run a construction company and when you study it from the money side, the diesel just doesn’t make much sense. Expensive BS.
Touré
Last year I bought a '99 F250 V10. It had 137K miles on it. I really wanted a 7.3 diesel but it cost considerably more. Now, I'm so glad I got the V10. Runs great, has plenty of power, and from what I've learned since then, cheaper for everything.
Toure Foster And less work to try and take care of it especially with employees driving them. Gas motor can drive up and almost immediately be shut off with little to no consequence. Turbo diesel needs time to let the turbo cool and all the fluids or just kept running if you’re in and out of all the time. I have an obs 7.3 that has 315k and has started to give me issues but overall has been a reliable work truck. Gas trucks are better for start stop in and out all day.
Same engine here. Totally stock. Last 2 years; 2 water pumps, radiator, turbo blades sticking, DPF filter baked with new sensor, brake caliper.
That is what happens in the DPF. Some EU shops have installed a quick disconnect for the DPF can than doing a chemical soak seems to work. Also, there have been some results with removing the DPF can, and as long as the honeycomb isn't too badly plugged. Burning it out with a propane tiger torch and blowing high-pressure air through it has had variable results. Remember PPE is a must and only qualified persons familiar with these tools should attempt any of these procedures.
Honestly I had 2 that were tuned and I love Ed it
Ed is a lucky man…
I have a 08 350 Lariat and only had minor issues(knock on wood). The biggest problem is RUST!!!! The rocker panels are going to need to be replaced and I’m currently getting estimates on a new bed. The bed rails are rusted away(under the bed that attaches to the frame).
You have the same color I have. You got a sharp truck, I’d love to have a duly.
Thank you! Sorry to hear about the rust. Are you back east or in the midwest?
Midwest outside of Chicago where the road salt is plentiful lol.
They're amazing engines the upkeep is very critical
Love my 6.4, has almost 300k miles on it and still running strong. Going to do the EGR delete soon.
That's a great amount of mileage and you haven't had to replace the turbo. I'm really impressed
@Kevin O'Neill She finally blew up about 6 months ago. It was a sad but proud day lol
Thanks for the info on the horizontal EGR valve. I had my DPF delete done. I've reached out to my mechanic and shared your snippet on the EGR issue. I'm waiting on his reply.
I had your first problem. Great video thanks brotha!
6.4 is a misunderstood beast. Better if a mechanic though. Nice truck