WATCH NEXT: Check out how I built the $700 Dollar AMD Gaming PC: ua-cam.com/video/v3GOGIJP_tA/v-deo.html In this video, we go over How to install the Arctic Freezer 36 ARGB CPU Cooler. We install it on an AMD system and an Intel System, a Step by Step Guide, going over heat and noise levels too. Check out the Arctic Freezer 36 on my Amazon Affiliate link: geni.us/9WpC As an Amazon Affiliate, I earn from qualifying purchases. These links below are my Amazon Affiliated links they help fund the channel and all the products I use. AMD ✅ ADATA 1TB Legend 850 LITE M.2 SSD - geni.us/BOk0 ✅ AMD Ryzen 5 5600 Processor - geni.us/H08y1CA ✅ PNY XLR8 Gaming 16GB (2x8GB) DDR4 DRAM 3600MHz - geni.us/srCzwe ✅ CORSAIR CX750M 80 PLUS Bronze Power Supply - geni.us/vDqbfG5 ✅ MSI B550-A PRO ProSeries Motherboard - geni.us/yzf0B ✅ XFX Speedster MERC310 RX 7900 GRE - geni.us/MQDR8 ✅ Fractal Design Pop Air RGB Magenta Core - geni.us/7BCR2mz ✅ MHQJRH Graphics Card GPU Bracket - geni.us/1rfR0lD Intel ✅ Montech Sky Two PC Case: geni.us/IoyB4 ✅ ASUS TUF Gaming Z690-Plus WiFi DDR5: geni.us/VH14s6G ✅ Intel Core i9-12900KF Processor: geni.us/sVo0xR6 ✅ EVGA CLCx360mm CPU Liquid Cooler: geni.us/4Wttgz ✅ Patriot Viper Venom RGB DDR5 32GB 6200MHz PVVR532G620C40K: geni.us/cb0ZPX ✅ SABRENT Rocket 4 Plus-G 2TB Advanced: geni.us/FlAJF ✅ Western Digital 500GB WD Blue SA510: geni.us/OPb2Y1T ✅ EVGA Supernova 1000 P5, 80 Plus Platinum 1000W Power Supply: geni.us/kSBMB ✅ MHQJRH Graphics Card GPU Bracket: geni.us/1rfR0lD Used on Both Systems ✅ ASUS ROG Strix XG438Q - geni.us/xaNu ✅ Windows 11: geni.us/NuGgpAZ ✅ AverMedia EZ Recorder 330 Capture Card: geni.us/d4Ag ✅ ARCTIC P12 PWM PST A-RGB White (3 Pack): geni.us/7tKSjF5 ✅ ARCTIC P12 PWM PST A-RGB Black (3 Pack): geni.us/Lx7cb
Great cooler. Im just gonna buy 3 of those fans that are attached to the freezer 36 and use them as intake on my case. Thanks alot for providing the name of them in the video!
Thanks so much for this video! I just installed one of these and it was very helpful, even though I had to figure out how to remove the stock cooler which was completely stuck to the CPU. It all worked out in the end though. I'm seeing around 10 Celsius difference between stock and Arctic which is more than I anticipated!
You know... I wanted to include in the video how to remove an older CPU, if it was stuck to the heatsink... but I skipped it to save some time hahah, sorry bud but don't worry its actually very common. Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thank you, clear and informative instructions, I didn't know you had to take off that CPU assembly for the Intel one! I mean I probably would have found out from the instructions, but seeing it done like this makes it far easier to understand, especially for someone with ADHD!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Also I am so happy i could help with the learning with ADHD, it means ton to me, thank you so much.
Thanks so much my friend, I do try hard but sadly, everyone only watches the big youtubers, thinking they only have they answers, and they really skip over stuff like this, but so very happy I could help you and please feel free to bring some of your friends to join the team, I would greatly appreciate it and I greatly appreciate you coming by and letting me know I could help you.
@@ThisBytesForYou I feel you. Keep in mind that majority of those big youtubers spent 5-10 years actively making content + some luck here and there, so just keep being you, you are already on a good way with almost 50k subscribers. Also on another note, videos nowadays are shorter and shorter, meaning that key details could be missing such as proper installation, advice, what to watch out for, etc. I have a firm belief that thanks to this fact people with time will seek out longer videos because they are looking for all in one video. You just need to persist with being active, and time will reward you. Similar thing occured with Flossy Carter who makes long videos and often without cuts in video or very little ones, and he reached the heights of popularity. I wish you the best my friend, you deserve it.
Thanks my friend, I do appreciate it, it means the world to me that you enjoy my work, I do try to make them short actually, they can be much longer, but I will still try to shorten them, just hard to find the right balance of enough info and not enough, thanks again my friend.
Thanks bud, I truly appreciate it, glad to see you back too. I am working on a lot at the moment and life is kinda blocking me from publishing, but I am on it, thanks so much for your support.
Thanks so much my friend, I do try hard but sadly, everyone only watches the big youtubers, thinking they only have they answers, and they really skip over stuff like this, but so very happy I could help you and please feel free to bring some of your friends to join the team, I would greatly appreciate it and I greatly appreciate you coming by and letting me know I could help you.
I'm sure it's a control, but the Wraith Spire with the 5900X seems like the worst possible combination in terms of cooling. For an AMD cooler, the Wraith Prism would make more sense. While it's still a stock AMD cooler, the Wraith Prism is just a bit more capable(though still not quite enough for any kind of OC).
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. So very happy you enjoyed it and welcome ;)
I have a question i want to populate al 4 ram slots on my mbo with g-skill ripjaws ram do i have enough clearance with this Artic 36 cooler???? Btw awesome video thumbs up...........
does it look like this: www.amazon.com/G-SKILL-RDDR4-2x16GB-32GVK-Ripjaws/dp/B07Z86WC1Z/ref=asc_df_B07Z86WC1Z/?tag=hyprod-20&linkCode=df0&hvadid=693535620609&hvpos=&hvnetw=g&hvrand=3834047603959782422&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008419&hvtargid=pla-931799025241&psc=1&mcid=e5fb9929b08d3f4aa9515842a245fa0f
I like the CPU coolers, but if thats simple paint, Im against it. If it isnt a Distinctly spoken of Ceramic coating.. I dont care for it at all. The fins or flanges, are far too tight for dust unless you are constantly dusting. Paint simply has no point on a radiator if it is not outdoors. It is an added insulator. Love your work as usual, very informative and concise.
Thanks, I am looking to see how it is on the fins, preferably without scratching them, I am checking in with Arctic, I will let you know as soon as I do. As for fins, thats common with any cpu cooler, same with liquid cooling but I agree, paints bad on a fins/radiator, I didn't think of it but I was impressed. Thanks so much for your kind words and support my friend, it means the world to me and I am so happy to have you here
I'm trying to install it on a Lenovo Legion T5, with an AMD 4 Ryzen 7 3700x but the screws don't go in and the sides supporting plates wholes do not match the ones in the board (they have equal distance between them, like a square), I'm so sad, guess there's no solution or is there?
Sorry my friend, OEM systems use proprietary parts, I don't have that system to test, my video would have helped if it was exact. I would recommend to call or email Arctic, they have great support and may be able to help: www.arctic.de/en/support/ PLEASE let me know how it works out for you.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
do the cooler screws need to be flush? just like in this video there seems be a point where the screw doesnt turn anymore, is that okay or do they need to be flush
My motherboard don't have a rgb header (asus 520m-k). Can I connect rgb cable to a hub style (powered by molex cable) controller ? Does it works? If I won't plug the rgb cables to anywhere the cooler will work just fine, only without RGB right?
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hello again, watching your video today got me thinking about my computer, it's not been as fast as it used to be and the monitor tends to go black for a second when the computer is under load, tried my brothers monitor and it still does the same, but the main issue is that the computer used to be fast and I could watch and play in full graphics quality, like 1080p or sometimes 4k, now I have to put the graphics to low or lower if posibble, and I can't have too many apps open as I could before, because it goes slow and u responsive, storage is only a quarter full, computer on the Inside is clean, so it's not that, nothing Intrusive runs in the background, I have asked around for help for a year at this point, no one can't quite put there finger on the problem, do you have any idea? If so may you please help me, I really don't want to buy a new computer, because I know this one can do fantastic.
I have the solution, but many don't want to hear it, but so that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard - manufacturer and exact model number 2. CPU - manufacturer and exact model number 3. RAM - manufacturer and exact model number 4. Video Card - manufacturer and exact model number 5. Power supply - manufacturer and exact model number 6. Monitor - manufacturer and exact model number Redundant I know, but many people forget to enter manufacturer and exact model number 7. Are you running through HDMI, DP, DVI, VGA, any adapters? 8. Is UEFI or Legacy Setup in the BIOS? 9. What slots do you have your RAM installed in? 10. What version of Windows are you using, 7, 8, 8.1, 10, 11, etc? 11. This video will help you identify hardware inside your PC: ua-cam.com/video/65ZSiVImJx0/v-deo.html
@@ThisBytesForYou I'm not sure for the first few as it was a ore build that was working absolutely fantastic, but for 7 I can say that I am using hdmi yes, I have checked the connection several times and even tried different leads, still get the same issue, as for number 8 I use UEFI and the bios is also update as well, 9 - I upgraded from 8 to 16 and it's made by fury, 10 - I'm using windows 11 home, I used to have 10 home, I have factory reset the pc about 3 times I think, thinking that would solves the issues it's been having. I'll check the video and get back to you, hope to hear from you soon, thank you.
@@ThisBytesForYou no problem, dont worry about it then, I dont have the time to do all that searching, I have given you as much information as I can, thanks for trying though.
That happens sometimes, look REAL close and verify that none of the thinner cables are rising too high, when that happens they can hit the blade. Also, if you have the fan stretched too far, or too constricted, it warps the frame, the blades hitting the frame.
No next to is fine, generally I don't put them on it, but next to it is fine, like i show you in this video so nothing should happen. Do you feel like this video has helped you?
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou my bad for asking again but I went to the store I have the stock with no rgb on am4 so I have 4 connectors my motherboard has 1 cpu fan header I connected them together plugged it into the cpu fan header I'm left with one 4 pin connector is that bad I'm not powering it on yet
No, if you are not using the RGB that is totally fine, it will still work without it, if you need more aRGB, this may be what you need from my Global Amazon affiliate link: geni.us/js4mPP1
@mikehadad9924 OK, just make sure you connect the ARGB headers like I show you in this video and of course the 4pin PWM cables then you will use Gigabyte Control center off of the support site for your motherboard and/or RGB Fusion to change the lighting, you can download it here: www.gigabyte.com/Motherboard/B550M-DS3H-rev-10-11-12-13/support#support-dl-utility You can use Gigabyte Control Center/RGB Fusion like I show you here: ua-cam.com/video/_AJlNxuukww/v-deo.htmlsi=AIyKHbbQi40TIp6o
I need help….. my windows does not boot when the windows circle loading start it spins half way then its freezes then my PC just doesnt boot is there a fix ???
What did you change prior to this happening, did you install a new drive, flash the bios, install new ram, a new graphics card, install new software, overclock?
So il explain in depth, got a new case, new motherboard b550 gaming plus, new CPU Ryzen 5600X. From my old PC i toke out the ram sticks my ssd drive and gpu. Tried booting windows from the ssd i toke out from my old pc but it did what i explained. Then i wiped the drive tried reinstalling it same thing again….. Could this be a faulty motherboard ??? Never been a common problem
I instaled a non RGB version of the arctic freeze 36, when i press the power button on my pc it turns on but cpu and dram lighst flash... tried loosening the cooler screws a bit niw it turns on for 1 sec and shuts off... pls help
Ahhh that is an OEM machine, so your backplate is more than likely built in, you don't need to remove it (there are trillions of different desktop designs, impossible to get to them all). Your Lenovo Legion T5 has a ton of different models, so that on its own is confusing, what processor do you have?
WATCH NEXT: Check out how I built the $700 Dollar AMD Gaming PC: ua-cam.com/video/v3GOGIJP_tA/v-deo.html
In this video, we go over How to install the Arctic Freezer 36 ARGB CPU Cooler. We install it on an AMD system and an Intel System, a Step by Step Guide, going over heat and noise levels too.
Check out the Arctic Freezer 36 on my Amazon Affiliate link: geni.us/9WpC
As an Amazon Affiliate, I earn from qualifying purchases. These links below are my Amazon Affiliated links they help fund the channel and all the products I use.
AMD
✅ ADATA 1TB Legend 850 LITE M.2 SSD - geni.us/BOk0
✅ AMD Ryzen 5 5600 Processor - geni.us/H08y1CA
✅ PNY XLR8 Gaming 16GB (2x8GB) DDR4 DRAM 3600MHz - geni.us/srCzwe
✅ CORSAIR CX750M 80 PLUS Bronze Power Supply - geni.us/vDqbfG5
✅ MSI B550-A PRO ProSeries Motherboard - geni.us/yzf0B
✅ XFX Speedster MERC310 RX 7900 GRE - geni.us/MQDR8
✅ Fractal Design Pop Air RGB Magenta Core - geni.us/7BCR2mz
✅ MHQJRH Graphics Card GPU Bracket - geni.us/1rfR0lD
Intel
✅ Montech Sky Two PC Case: geni.us/IoyB4
✅ ASUS TUF Gaming Z690-Plus WiFi DDR5: geni.us/VH14s6G
✅ Intel Core i9-12900KF Processor: geni.us/sVo0xR6
✅ EVGA CLCx360mm CPU Liquid Cooler: geni.us/4Wttgz
✅ Patriot Viper Venom RGB DDR5 32GB 6200MHz PVVR532G620C40K: geni.us/cb0ZPX
✅ SABRENT Rocket 4 Plus-G 2TB Advanced: geni.us/FlAJF
✅ Western Digital 500GB WD Blue SA510: geni.us/OPb2Y1T
✅ EVGA Supernova 1000 P5, 80 Plus Platinum 1000W Power Supply: geni.us/kSBMB
✅ MHQJRH Graphics Card GPU Bracket: geni.us/1rfR0lD
Used on Both Systems
✅ ASUS ROG Strix XG438Q - geni.us/xaNu
✅ Windows 11: geni.us/NuGgpAZ
✅ AverMedia EZ Recorder 330 Capture Card: geni.us/d4Ag
✅ ARCTIC P12 PWM PST A-RGB White (3 Pack): geni.us/7tKSjF5
✅ ARCTIC P12 PWM PST A-RGB Black (3 Pack): geni.us/Lx7cb
Great cooler. Im just gonna buy 3 of those fans that are attached to the freezer 36 and use them as intake on my case. Thanks alot for providing the name of them in the video!
anytime, happy I could help.
Thanks so much for this video! I just installed one of these and it was very helpful, even though I had to figure out how to remove the stock cooler which was completely stuck to the CPU. It all worked out in the end though. I'm seeing around 10 Celsius difference between stock and Arctic which is more than I anticipated!
You know... I wanted to include in the video how to remove an older CPU, if it was stuck to the heatsink... but I skipped it to save some time hahah, sorry bud but don't worry its actually very common.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Love the close up high quality shots at around 2:40. Well done my friend!
thanks bud, I still need to work on the focus... its soooo hard for me
@@ThisBytesForYou it was dam good
Thanks bud, I do appreciate it ;)
Thank you, clear and informative instructions, I didn't know you had to take off that CPU assembly for the Intel one! I mean I probably would have found out from the instructions, but seeing it done like this makes it far easier to understand, especially for someone with ADHD!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Also I am so happy i could help with the learning with ADHD, it means ton to me, thank you so much.
Thank you for explaining and show everything so well! You deserve way more views and subscribers :)
Thanks so much my friend, I do try hard but sadly, everyone only watches the big youtubers, thinking they only have they answers, and they really skip over stuff like this, but so very happy I could help you and please feel free to bring some of your friends to join the team, I would greatly appreciate it and I greatly appreciate you coming by and letting me know I could help you.
@@ThisBytesForYou I feel you. Keep in mind that majority of those big youtubers spent 5-10 years actively making content + some luck here and there, so just keep being you, you are already on a good way with almost 50k subscribers. Also on another note, videos nowadays are shorter and shorter, meaning that key details could be missing such as proper installation, advice, what to watch out for, etc. I have a firm belief that thanks to this fact people with time will seek out longer videos because they are looking for all in one video. You just need to persist with being active, and time will reward you. Similar thing occured with Flossy Carter who makes long videos and often without cuts in video or very little ones, and he reached the heights of popularity. I wish you the best my friend, you deserve it.
Thanks my friend, I do appreciate it, it means the world to me that you enjoy my work, I do try to make them short actually, they can be much longer, but I will still try to shorten them, just hard to find the right balance of enough info and not enough, thanks again my friend.
Flipping awesome video! Your videos always inform us so well, great job!
Thanks bud, I truly appreciate it, glad to see you back too. I am working on a lot at the moment and life is kinda blocking me from publishing, but I am on it, thanks so much for your support.
Excellent video guide. Just what I was looking for. Thank you!
Thanks so much my friend, I do try hard but sadly, everyone only watches the big youtubers, thinking they only have they answers, and they really skip over stuff like this, but so very happy I could help you and please feel free to bring some of your friends to join the team, I would greatly appreciate it and I greatly appreciate you coming by and letting me know I could help you.
I'm sure it's a control, but the Wraith Spire with the 5900X seems like the worst possible combination in terms of cooling. For an AMD cooler, the Wraith Prism would make more sense. While it's still a stock AMD cooler, the Wraith Prism is just a bit more capable(though still not quite enough for any kind of OC).
I agree, but I used what it came with, so yes a control, this Freezer was AMAZING
just a quick correction, the sticker is for the fan if u decide to reverse mount. for better aesthetic.
Thanks for the heads up bud, I don't know how I missed that.
@@ThisBytesForYou I love your reviews. thank you for a great content. ❤️
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
A great amount of research! Thanks again for all your work on our behalf!
Thanks brother, it would have been another 20 minutes, but I had to trim it, it was WAY too long
It’s so relaxing to watch 👍🏼
haha, well thanks my friend, so very happy you enjoyed it... I have been called the Bob Ross of PC building, made me happy haha
Thank you brother much love from Libya
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. So very happy you enjoyed it and welcome ;)
I've recentely bought the black one and it's amazing, I love it !!!
Yeah it really is amazing, to think, its not even liquid cooling and it works so well.
I have a question i want to populate al 4 ram slots on my mbo with g-skill ripjaws ram do i have enough clearance with this Artic 36 cooler???? Btw awesome video thumbs up...........
does it look like this: www.amazon.com/G-SKILL-RDDR4-2x16GB-32GVK-Ripjaws/dp/B07Z86WC1Z/ref=asc_df_B07Z86WC1Z/?tag=hyprod-20&linkCode=df0&hvadid=693535620609&hvpos=&hvnetw=g&hvrand=3834047603959782422&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008419&hvtargid=pla-931799025241&psc=1&mcid=e5fb9929b08d3f4aa9515842a245fa0f
@@ThisBytesForYou Exactly like those m8
you should be good.
awesome video as always thx for the tutorial
thanks so much my friend, so very happy you enjoyed it
@@ThisBytesForYou your welcome my friend.
Keep the great content coming! 🙂
Thank you so much my friend, it means the world to me.
Awsome video mate! but i have a question, how can i detach the fan let's say i want to change the fan position?
Thanks,.. but did you watch the video?
Will this cooler fit on a MSI b450 mini-Atx, regarding the space needed around the cpu, ram sticks and other things
You might not realize this, but it's actually the same amount of space, just less slots to make it fit ;)
I like the CPU coolers, but if thats simple paint, Im against it. If it isnt a Distinctly spoken of Ceramic coating.. I dont care for it at all. The fins or flanges, are far too tight for dust unless you are constantly dusting. Paint simply has no point on a radiator if it is not outdoors. It is an added insulator.
Love your work as usual, very informative and concise.
Thanks, I am looking to see how it is on the fins, preferably without scratching them, I am checking in with Arctic, I will let you know as soon as I do. As for fins, thats common with any cpu cooler, same with liquid cooling but I agree, paints bad on a fins/radiator, I didn't think of it but I was impressed.
Thanks so much for your kind words and support my friend, it means the world to me and I am so happy to have you here
LOL ok bud
I'm trying to install it on a Lenovo
Legion T5, with an AMD 4 Ryzen 7
3700x but the screws don't go in and the sides supporting plates wholes do not match the ones in the board (they have equal distance between them, like a square), I'm so sad, guess there's no solution or is there?
Sorry my friend, OEM systems use proprietary parts, I don't have that system to test, my video would have helped if it was exact. I would recommend to call or email Arctic, they have great support and may be able to help: www.arctic.de/en/support/
PLEASE let me know how it works out for you.
Hey what case would you recommend for a high end pc?
My latest build, and now my workstation, I love this case: ua-cam.com/video/ymmxN141cxI/v-deo.html
Probably a stupid question. But can I attach a fan to the second fan for more air flow with my exhaust fan?? If that makes sense
If it has a connection, yes you can, that's what its made for. Not a stupid question though, hope I could help.
@@ThisBytesForYou thank you for the reply!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Will this cooler cool off a amd ryzen 9 7950x3d, and keep it cool while stressing it ? Don't want to put a water cooler. With a XFX 7900xtx
No, you need liquid for a 7950
i messed up on the fan part is there anyway to take out the fans
Have you watched this video?
Is this cooler powerful enough for a r7 7800x3d
yup, you should be totally fine with this cooler
do the cooler screws need to be flush? just like in this video there seems be a point where the screw doesnt turn anymore, is that okay or do they need to be flush
This is how they are installed now, and running, you don't have to have them flush if you dont want to
I can't find the white one in USA Store 😢
@@FirasAlmakssosi good thing I have a global amazon affiliate link in the description, I'm I the us too.
I love all your videos 😊
Thanks bud, so very happy you enjoy my videos, and I hope they help you as well, always here for you if you need help.
My motherboard don't have a rgb header (asus 520m-k). Can I connect rgb cable to a hub style (powered by molex cable) controller ? Does it works?
If I won't plug the rgb cables to anywhere the cooler will work just fine, only without RGB right?
you can use something like this, but yes, the unit will work just fine without RGB: geni.us/js4mPP1
@@ThisBytesForYou Thank you for the response. Your video helped me a lot too. 10/10, subbed!
Thank you so much for your kind words and support my friend, it means the world to me and I am so very happy I could help you.
The cooler does not cover the whole area of the AMD processor, does this matter?
@@coolmind2476 no, many do not fully cover it but it covers the cores, the source of the heat so it's all good my friend.
@@ThisBytesForYou thx for the quick response 👍
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Can I also insert my rear case fan into the daisy chain?(onlyfor Rgb) Or do I have tp buy a Splitter to do that?
@yannick_v you sure can
@@ThisBytesForYouok, thank you
Always a pleasure my friend, happy I could help
Hello again, watching your video today got me thinking about my computer, it's not been as fast as it used to be and the monitor tends to go black for a second when the computer is under load, tried my brothers monitor and it still does the same, but the main issue is that the computer used to be fast and I could watch and play in full graphics quality, like 1080p or sometimes 4k, now I have to put the graphics to low or lower if posibble, and I can't have too many apps open as I could before, because it goes slow and u responsive, storage is only a quarter full, computer on the Inside is clean, so it's not that, nothing Intrusive runs in the background, I have asked around for help for a year at this point, no one can't quite put there finger on the problem, do you have any idea? If so may you please help me, I really don't want to buy a new computer, because I know this one can do fantastic.
I have the solution, but many don't want to hear it, but so that I can help, please list the manufacturer and exact model number of the following components:
1. Motherboard - manufacturer and exact model number
2. CPU - manufacturer and exact model number
3. RAM - manufacturer and exact model number
4. Video Card - manufacturer and exact model number
5. Power supply - manufacturer and exact model number
6. Monitor - manufacturer and exact model number
Redundant I know, but many people forget to enter manufacturer and exact model number
7. Are you running through HDMI, DP, DVI, VGA, any adapters?
8. Is UEFI or Legacy Setup in the BIOS?
9. What slots do you have your RAM installed in?
10. What version of Windows are you using, 7, 8, 8.1, 10, 11, etc?
11. This video will help you identify hardware inside your PC: ua-cam.com/video/65ZSiVImJx0/v-deo.html
@@ThisBytesForYou I'm not sure for the first few as it was a ore build that was working absolutely fantastic, but for 7 I can say that I am using hdmi yes, I have checked the connection several times and even tried different leads, still get the same issue, as for number 8 I use UEFI and the bios is also update as well, 9 - I upgraded from 8 to 16 and it's made by fury, 10 - I'm using windows 11 home, I used to have 10 home, I have factory reset the pc about 3 times I think, thinking that would solves the issues it's been having. I'll check the video and get back to you, hope to hear from you soon, thank you.
Sorry bud but I won't be able to help you unless I know the others, I need them all. That video will help you figure out everything you have.
@@ThisBytesForYou no problem, dont worry about it then, I dont have the time to do all that searching, I have given you as much information as I can, thanks for trying though.
Imagine how long it would take me to help you without it, well, here when you need me and can give me that info.
Just installed mine and bk fan is clicking grinding every now and again I'm stumped
That happens sometimes, look REAL close and verify that none of the thinner cables are rising too high, when that happens they can hit the blade. Also, if you have the fan stretched too far, or too constricted, it warps the frame, the blades hitting the frame.
@ThisBytesForYou I loosened the screws a full turn and it's stopped doing it 😊
nice, so yeah it was stretched too far or too constricted, relaxing the screw allowed it to place itself where it needs to be.
Will anything bad happen to my motherboard if i leave the cables next to the cooler im at the last part
No next to is fine, generally I don't put them on it, but next to it is fine, like i show you in this video so nothing should happen. Do you feel like this video has helped you?
@@ThisBytesForYouThanks bro u responded quick i was scared something bad would have happend appreciate the help 🙏
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou my bad for asking again but I went to the store I have the stock with no rgb on am4 so I have 4 connectors my motherboard has 1 cpu fan header
I connected them together plugged it into the cpu fan header I'm left with one 4 pin connector is that bad I'm not powering it on yet
No, if you are not using the RGB that is totally fine, it will still work without it, if you need more aRGB, this may be what you need from my Global Amazon affiliate link: geni.us/js4mPP1
Is it ok if i use 70% alcohol to clean cpu thermal paste from stock cooler with a cloth?
yes, that is perfectly fine, just make sure its totally dry before you turn it on.
the cooler doesn't have thermal paste already on it though, and it includes MX5 thermal paste, which is great.
@@ThisBytesForYou I forgot to ask you do you need to tighten screws left and right all way down on the cooler or just half?
Watch the video, it give you all the information you need
how do you change the rgb colors because mine is only lighting yellow
Have you watched the video?
@@ThisBytesForYouyes i have but i still dont understand
What is the manufacturer and model number of your motherboard?
@@ThisBytesForYou Gigabyte B550M DS3H
@mikehadad9924 OK, just make sure you connect the ARGB headers like I show you in this video and of course the 4pin PWM cables then you will use Gigabyte Control center off of the support site for your motherboard and/or RGB Fusion to change the lighting, you can download it here: www.gigabyte.com/Motherboard/B550M-DS3H-rev-10-11-12-13/support#support-dl-utility
You can use Gigabyte Control Center/RGB Fusion like I show you here: ua-cam.com/video/_AJlNxuukww/v-deo.htmlsi=AIyKHbbQi40TIp6o
For some reason the screws wont screw in on my contact frame any idea why? I am using the right screws
did you change your contact frame from stock and what is the manufacturer and model number of your cpu and motherboard? 3 questions.
@@ThisBytesForYou yes i did change it to the arctic contact frame. Mobo and cpu are: Asus prime b660 plus d4 and intel core i5 12400f
OK cool, so you are using Intel; did you happen to watch this video?
@@ThisBytesForYou yes
So you removed the socket like i show you, holding the backplate in place, and using the intel shoulder screws to screw the plate in?
I need help….. my windows does not boot when the windows circle loading start it spins half way then its freezes then my PC just doesnt boot is there a fix ???
What did you change prior to this happening, did you install a new drive, flash the bios, install new ram, a new graphics card, install new software, overclock?
So il explain in depth, got a new case, new motherboard b550 gaming plus, new CPU Ryzen 5600X.
From my old PC i toke out the ram sticks my ssd drive and gpu. Tried booting windows from the ssd i toke out from my old pc but it did what i explained. Then i wiped the drive tried reinstalling it same thing again….. Could this be a faulty motherboard ??? Never been a common problem
Put the old CPU back in, flash the bios to the latest version then put the 5600x back in and you should be good.
@@ThisBytesForYou its on the latest msi Bios 😣
Its on the latest Bios 😣
I instaled a non RGB version of the arctic freeze 36, when i press the power button on my pc it turns on but cpu and dram lighst flash... tried loosening the cooler screws a bit niw it turns on for 1 sec and shuts off... pls help
Take it completely apart again and try again, make sure you have the 4pin pwm cable connected to CPU fan.
@@ThisBytesForYou pwm cable? Is ti better to use cpu fan 1 or cpu fan 2 wp?
@@ivo9749 either which one of the 2, as long as you configure it for PWM, yes PWM cable.
@@ThisBytesForYou pwm cable is cpu fan cable with 4 holes?
correct, that allows the CPU fan to be controlled by your BIOS rather than being at 100% all the time.
What if I don't have the same fucking backplate
@@Irioberzan then you don't have the same backplate, not sure why the hostility but I can help if you like.
How am I supposed to install it then man? I am just a bit annoyed because nobody says it. I have a Lenovo Legion T5 PC.
Ahhh that is an OEM machine, so your backplate is more than likely built in, you don't need to remove it (there are trillions of different desktop designs, impossible to get to them all). Your Lenovo Legion T5 has a ton of different models, so that on its own is confusing, what processor do you have?
@@ThisBytesForYou AMD™ Ryzen™ 7 5800-processor
AM4, so did you watch the portion of the video where I show you how to install it on AMD?