Excellent video. I have a 2dr, 1994 Nissan Sentra and the cable broke and I have tried 3 times to get replacements from Rock Auto and Carparts and they can't seem to know the difference between a 4 door and 2 door. They kept sending me a regulator assy for a 4 door. I 'll just fix it myself, now. Thanks.
for the end-tip of the cable, the bicycle shop also sells those cable end thingies, just crimp with your pliers, saves you a bit of trouble. i did mine...cost 30pesos for the cable and 2 pesos each for the end-tips, cable length is even enough for power window with up and down cables. cheap alternative. although a bit of patience is required.
Buen día desde México, el elevador ya tuvo reparación no esta original se ven los tornillos de 3/16 pasados con tuerca en los 3 orificios que sujetan la tasa, en ese caso separar la tasa superior de la que sujeta el rodillo, extraer las piezas (rodillo, bastago, tasas y resorte) al igual q el riel, base porta cristal y terminales, por ultimo se tensaría lo suficiente el chicote al instalar en el rodillo sobre el bastago para que tenga una buena tensión para el peso del cristal, saludos excelente video.
salamat dito sir nagawa ko bintana ko kaso 3 beses ko inulit nagkamali ako haha una baliktad yuny itim nya na parang hose. may pwesto pala talaga yun pangalawa yung ikutan naman baliktad pangatlo tumama na, haha naka 3 brake cable ako charge to experience alambre ginamit ko
I have a 99 Mitsubishi Eclipse. My window crank was getting stuck/super stiff at like 3 different positions when raising the window up. I sprayed wd40. While it helped it didn’t fix the issue. After 2 days the issue went away on its own. Not sure what happened but it’s almost impossible to buy window cranks new for the Eclipse. Junkyard/ebay are like the only options.
thank you guy. i too tried my car winder after your lovely demo. 100% workout
Thank you! This is a big help as my window cable snapped 😅
I'll try your method. Thank you for your detailed repair tutorial.
thank u sir. nasulusyunan na ang matagal kong Problema. GodBless you more & more.
Thank you! Just what I needed.
Thanks man.. I am struggling to get a replacement part.. this is a great fix... Ford bantam 1998
And thank you for the firsthand illustration..
Ang galing itry ko po iyan naputol kanina lang ang cable ng bintana ko, salamat po ng marami sa dagdag kaalaman
bang husay idol, nice one
Excellent video. I have a 2dr, 1994 Nissan Sentra and the cable broke and I have tried 3 times to get replacements from Rock Auto and Carparts and they can't seem to know the difference between a 4 door and 2 door. They kept sending me a regulator assy for a 4 door. I 'll just fix it myself, now. Thanks.
Salamat idol. Magandang remedyo to. Pansamantagal.
Sa wakas boss. Salamat s video. Helps a lot!
salamat sa pag abang boss..
Very Good Video
I do know nothing about this but enteristing job
owow nice video dami ko natutunan
Hola desde panama gracias me has dsado un buen dato para reparar las maquinas de uno aca que esta asi dañado y para colmo las 4 saludos
Very good 🙏
Respect big dawg! I will be trying this today!
for the end-tip of the cable, the bicycle shop also sells those cable end thingies, just crimp with your pliers, saves you a bit of trouble. i did mine...cost 30pesos for the cable and 2 pesos each for the end-tips, cable length is even enough for power window with up and down cables. cheap alternative. although a bit of patience is required.
Thanks sir, yes its more convenient to use those but sad to say that it's not even available in any bike shops or autosupply in our area..
Very nice
Very useful
amazing working
Galing nmn
Thanks po
Ang galing naman ni koya kithy
thanks
Buen día desde México, el elevador ya tuvo reparación no esta original se ven los tornillos de 3/16 pasados con tuerca en los 3 orificios que sujetan la tasa, en ese caso separar la tasa superior de la que sujeta el rodillo, extraer las piezas (rodillo, bastago, tasas y resorte) al igual q el riel, base porta cristal y terminales, por ultimo se tensaría lo suficiente el chicote al instalar en el rodillo sobre el bastago para que tenga una buena tensión para el peso del cristal, saludos excelente video.
Merun narin po b kayong tut para s power window palit cable wire salamat po
Please help, is the pulley for the cable suppose to be loose ?
there should be a little play but not too loose.
ماشاء الله تحية اسلامية اليك
Bien débrouillé
tamsak host
thanks po, done sub...
I wanna know album name
Of this background track ( muzik )
Background music album name
Mention plz
Nice job po. I gat po sa mga kamay
#rhosebert
Thanks po
saan po makakabili regulator sir para sa lancer convert ko kasi power window to manual
medyo my mali sa pag install.. peru pwd din pag tyagaan.. yan kc ang trabaho ko sa mga window.. mag training muna ng husto.. my shop kc ako
Salamat sir, opo may inulit ako jan. Hehe.. Di po talaga maiiwasan sa DIY. Hehe
Sir good day.. Anung cable ginamit mo jan?
Brake cable ng bike po sir. Mas maganda kung yung orig na shimano para di gaano kinakalawang.
This is possible for power window brother
I haven't tried to dismantle power window mechanism but if it's cable I thing its just the same.
Sir anong klasing cable ang binili parang ang haba,,,bumili ako ng sa bike short yong cable sir,,,
Brake cable na pang rear ng bike.. Baka pang front binigay sau naikili talaga po yun
Ilang brake cable Ang magagamit po sa Isang bintana?
isang cable lang po.
Salaam, how should be the wire sir
salamat dito sir nagawa ko bintana ko kaso 3 beses ko inulit nagkamali ako haha
una baliktad yuny itim nya na parang hose. may pwesto pala talaga yun
pangalawa yung ikutan naman baliktad
pangatlo tumama na,
haha naka 3 brake cable ako
charge to experience
alambre ginamit ko
nice to hear that sir. nung 1st time ko naisip gawin yan sir..maraming trial and error din po ako..hehe
@@Kulikutz thanks sir laking tulong nito
maraming salamat ako nlng mg diy naputol cble ko.
Baka po pwede po kayo gumawa tutorial naman sa manual window na kusa bumababa
para sa manual window din po yan. pag inaangat ok naman? pero kusang nababa lang?
2meters cable ?
opo sir around 2m sya.
Anong wire po yan pinalit nyo
Brake cable po ng pang bike.. Tag 50pesos lang sa bikeshop pero meron din shimano na di gaano kinakalawang above 100pesos naman.
Wish you could do mine ... I've been told I have to get a complete electric mecanism and to fit £150 ...geeeez its only a broken cable ?
wow, that's too expensive. I wish I could help you with that.
@@Kulikutz... IKR...?
Thankyou though X
Sir gaano po kahaba ang cable na gagamitin?
around 1.5meter po. yan yung standard na brake cable ng bike.
Saan po ang shop nyo sir?
Wala po ako shop sir., DIY enthusiasts lang po..
Boss pano ba kalasin sa bintana yan...may video kb
Meron sir kaso naka fastforward.. Hehe. ua-cam.com/video/dlGFU_mY-r4/v-deo.html
Done dikit hastag nongjex
Thanks.. Done subs..
Left window ba eto sir?
yes po sir.
I have a 99 Mitsubishi Eclipse. My window crank was getting stuck/super stiff at like 3 different positions when raising the window up. I sprayed wd40. While it helped it didn’t fix the issue. After 2 days the issue went away on its own. Not sure what happened but it’s almost impossible to buy window cranks new for the Eclipse. Junkyard/ebay are like the only options.
الموسيقى حرام
😂😂✌️no
loose thread mechanism window riser how to fix?
Ang galing itry ko po iyan naputol kanina lang ang cable ng bintana ko, salamat po ng marami sa dagdag kaalaman
sir anong cable po yan at san nabibili? same model din papalitan ko lancer itlog, thanks
Brake cable ng bike sir.. Punta ka lang sa bike shop. Mga 20-150 around pesos lang.
@@Kulikutz yung lock di ko lang alam tawag meron sila ginagamit yung pinupukpok eh ano kaya tawag dun
Opo meron lock na aluminium pero di ko alam dan nakakabili kaya kawad nalang ginamit ko.. Hehe
@@LivingWell. soldering lead ang gagamitin sa lock.
@@hectorgalolo9164 di ba msyadong malambot yun sir?