Weird that you uploaded this right before I was gonna install my STI engine mount for my FRS that I ordered from yall last week 😂 since I need to replace my o2 sensor, I'll remove my ACE header rather than the front pipe so getting to the engine mount on the driver side should be easier 🤔
@@mresab1997 I like the header but the overpipe that goes with it is rubbing against the subframe (apparently its common) hence why I'm gonna see if the STI mount will help (it got worse after installing my Harrop supercharger 😅). As for catback, I'm running Dezod 2.5 inch and stock front pipe
@@aerowick4643 yes, it’s very common! Motor mounts are actually a co-req for the installation of Ace, specifically! I’d be curious to know if the STI mounts resolve your issue. Please let me know when you get the tested! And great sound choice with Dezod! How much HP and TQ you making?
@@mresab1997 for sure! And yeah, hopefully the STI mount is stiff enough, I don't plan on going stiffer haha. According to the dyno when i went to delicious, I'm pushing 311 hp and 224 lb ft of torque on e85
@@aerowick4643 that’s a very well-rounded figure! Good job! I’m aiming for the same 300 area and low-mid 200’s myself :) Btw what do you think are the pros and cons of stiffer and stiffest mounts? I just like STI cause they’re reputable and it would flow in terms of manufacturer specs, I presume. What say you?
Why make 2 of the same videos, and in neither one, never show how to get the hardest mount out with stock parts, or show how one might get it out. Anyone watching this video does not care that you have a header and that you can take it out the front.
When more aftermarket comes for the GR86/2022 BRZ, will you guys start doing monthly videos for them like on the older models?
Very surprised that they don’t have a brz yet
@@Dragon228833 same
Absolutely! We've got a GR86 on the way 😉
Kevin has one coming as well!
@@FTspeed Can’t wait for the content 😁👍🏽
Weird that you uploaded this right before I was gonna install my STI engine mount for my FRS that I ordered from yall last week 😂 since I need to replace my o2 sensor, I'll remove my ACE header rather than the front pipe so getting to the engine mount on the driver side should be easier 🤔
How do you like your header? What catback/FO you running? Be sure to let me know how you like the STI mounts! I’m ordering them too.
@@mresab1997 I like the header but the overpipe that goes with it is rubbing against the subframe (apparently its common) hence why I'm gonna see if the STI mount will help (it got worse after installing my Harrop supercharger 😅). As for catback, I'm running Dezod 2.5 inch and stock front pipe
@@aerowick4643 yes, it’s very common! Motor mounts are actually a co-req for the installation of Ace, specifically! I’d be curious to know if the STI mounts resolve your issue. Please let me know when you get the tested! And great sound choice with Dezod! How much HP and TQ you making?
@@mresab1997 for sure! And yeah, hopefully the STI mount is stiff enough, I don't plan on going stiffer haha. According to the dyno when i went to delicious, I'm pushing 311 hp and 224 lb ft of torque on e85
@@aerowick4643 that’s a very well-rounded figure! Good job! I’m aiming for the same 300 area and low-mid 200’s myself :)
Btw what do you think are the pros and cons of stiffer and stiffest mounts? I just like STI cause they’re reputable and it would flow in terms of manufacturer specs, I presume. What say you?
I have a Jackson racing supercharger on my frs would that affect this process?
How bad is at idle. How much noise?
What’s the oldest yet most reliable model frs do you recommend man?
I'd say 2015
@@bravo_10 that’s what I got
Anything above 2013 (recall model year) and you’re good.
I think the next mod should be new tires haha
How long roughly is the install? Is there any issues if I have the stock header of finagling the mounts out from the engine?
Should you warm up your engine before doing this? Thanks
I wouldn’t. Will make manoeuvring below it and around the headers very difficult due to the surfaces being hot
@@bittersolution3741 that’s reasonable. Plus, it wouldn’t be wise to torque into soft mental anyway. Guess I just overthought that one 😅 thanks man.
Demasiadas modificaciones ,parece que los ingenieros no saben ,luego cuando surjan problemas la cul pa es de SUBARU.😊
I would love for you to build my FR-S bro please hmu
Fiest
Why make 2 of the same videos, and in neither one, never show how to get the hardest mount out with stock parts, or show how one might get it out.
Anyone watching this video does not care that you have a header and that you can take it out the front.
First*
And second 💀