When I do this what works for me is, close the door. And then peel the sticker and stuff up the strip in that small gap. it will be tight but good seal then after that’s done. Continue to stuff the rest in the gap while peeling the back sticker. Then after all that’s done Get a a thin object (I used a screwdriver) to run tru to make sure it all sticks, no fuzz about removing the doors and all that
Got some of those back in December and I’m glad that I did as it’s certainly reduced the amount of dust that gets in them! Glad you made this vid for those who don’t know about this idea.
@@KeCoCollects Lol but see that’s what makes for great content, the trial and error situations that most of us will relate to. I found it easy except for the door part on the right side of each case that was a bit annoying and I was able to detach mine because of the limited space that I currently have. Still I made it work and I’m pretty happy with the end result.
OMG Keco, I was on the edge of my seat waiting to see which one you was going to chose😅 You picked the right one👍 The white ones will turn an ugly yellow over time. Awesome collection👍
Very informative and helpful video 👍👍👍 Thank you ! May I ask you something? I have the same glass IKEA cabinets at home. And my question is, what lights are those that you use and how did you fix them ? Greetings !
So you going to dust-proof the backs too? Do you have a big air purifier in the room? I would think that would be important to keep the room itself less dusty.
Looking to dust proof my detolf cabinets. After dust proofing your cabinets, how do you rate your purchase of the strips. Do you recommend them, or is there something better? Do not really want to take the doors off to install them.
I'm not upset I have them, but I don't know how much protection it genuinely offers in hindsight. In my latest display video, I explain that I only put it on the one side now.. that's good enough for me. Check it out and let me know!
Hey there Keco, I have a question for you. I got a captain Rex hot toy about a month ago and its still in its original packaging, it’s double boxed and has protectant card board paper in the box with it. I’m in Atlanta GA, and it’s been 95-100% humidity outside over the past few days and I’m starting to get worried about the humidity levels in my home. Do you think damage to the figure is worth worrying about or should I consider getting a dehumidifier?
Do you have AC? If not, a humidifier would be helpful. However, if you are going to be in a humid zone or area, a clone is your best bet. Not much rubber or anything on it to degrade. It's a mesh undersuit
@@KeCoCollects Yes I do have AC, and that’s good to hear as I’m new to collecting and not sure of clone armor/materials are as degradable as pleather, rubber, and cloth based figures. I definitely will use a humidifier as Atlanta gets really humid. Thanks for the reply, it’s much appreciated👍
When I do this what works for me is, close the door. And then peel the sticker and stuff up the strip in that small gap. it will be tight but good seal then after that’s done. Continue to stuff the rest in the gap while peeling the back sticker. Then after all that’s done Get a a thin object (I used a screwdriver) to run tru to make sure it all sticks, no fuzz about removing the doors and all that
Officially pinned this comment. Great suggestion!
That collection ❤️ !!!!! This is the way! Great idea on the weather strips.
😎😎😎
Got some of those back in December and I’m glad that I did as it’s certainly reduced the amount of dust that gets in them! Glad you made this vid for those who don’t know about this idea.
I may have to give an update LOL. Found easier way to do it all than my trial and error. Happy now!
@@KeCoCollects Lol but see that’s what makes for great content, the trial and error situations that most of us will relate to. I found it easy except for the door part on the right side of each case that was a bit annoying and I was able to detach mine because of the limited space that I currently have. Still I made it work and I’m pretty happy with the end result.
OMG Keco, I was on the edge of my seat waiting to see which one you was going to chose😅 You picked the right one👍 The white ones will turn an ugly yellow over time. Awesome collection👍
CRISIS AVERTED! LOL - thanks for watching
Careful about completely doing this as you could trap moisture and dust inside the detolf.
Fair point. I actually only have stripping on one side (the non hinge side)
I did this a couple of years ago. And it does help cut down the amount of dust. However... it's not perfect! But a definite reduction.
Right, nothing is perfect, but it sure is better than nothing!
Thanks for another good one! When can we expect to see you back on Collectors Mingle with Will and them?
I'm actually supposed to be on with Will this weekend! (I think) 😂
So what else did you buy at store???????
Lol. Awesome video! Thanks for the tips.
Deluxe Hawkeye. I've been wanting the "Ronin" version for a while. He makes a SMALL cameo in this video 😂
Can we buy the display cases you have in this video? Don’t have a link? They are awesome.
I got them from IKEA, but I've heard they have been discontinued . I built some new ones myself at of garage shelves in that work really nice
Very informative and helpful video 👍👍👍
Thank you !
May I ask you something?
I have the same glass IKEA cabinets at home.
And my question is, what lights are those that you use and how did you fix them ?
Greetings !
The are cefrank led strips I got off Amazon. I did a video about the lighting that has the links to it.
@@KeCoCollects Thank you my friend 🍻
I will check your video about the lighting 👍
So you going to dust-proof the backs too? Do you have a big air purifier in the room? I would think that would be important to keep the room itself less dusty.
The back are sealed -- the front was then only issue for "leakage"
Do you have a video on installing the cabinet lights? Thanks.
Yes and no -- I go over installing the LED light strips, but nothing fancy. Check out "the perfect hot toys display lighting" video I did
Looking to dust proof my detolf cabinets. After dust proofing your cabinets, how do you rate your purchase of the strips. Do you recommend them, or is there something better? Do not really want to take the doors off to install them.
I'm not upset I have them, but I don't know how much protection it genuinely offers in hindsight. In my latest display video, I explain that I only put it on the one side now.. that's good enough for me. Check it out and let me know!
@@KeCoCollects I will. Enjoying your videos.
Hey there Keco, I have a question for you. I got a captain Rex hot toy about a month ago and its still in its original packaging, it’s double boxed and has protectant card board paper in the box with it. I’m in Atlanta GA, and it’s been 95-100% humidity outside over the past few days and I’m starting to get worried about the humidity levels in my home. Do you think damage to the figure is worth worrying about or should I consider getting a dehumidifier?
Do you have AC? If not, a humidifier would be helpful. However, if you are going to be in a humid zone or area, a clone is your best bet. Not much rubber or anything on it to degrade. It's a mesh undersuit
@@KeCoCollects Yes I do have AC, and that’s good to hear as I’m new to collecting and not sure of clone armor/materials are as degradable as pleather, rubber, and cloth based figures. I definitely will use a humidifier as Atlanta gets really humid. Thanks for the reply, it’s much appreciated👍
dude...... dude...... what are you? All those hot toys. I need some advice lol
"I'm Batman..."
I’m painting replays windows :)
Oh sweet! They had mentioned they were getting that done. The M'BORO one?
@@KeCoCollects yessir
@@KeCoCollects next time you go to the boro replay let me know whatcha think man, love your channel
What do you use as risers for you derolfs?
IKEA KALLAX
What’s a tour of your museum cost?😬
A hug or handshake :)