The method of creating the track sag is great. Thanks for the tip! This same kit will be my next purchase for sure. You did a fantastic job with this. Excellent!!!
I was going to gripe about the PzB 39 this late in the war but considering how that MG34 turned out I think you absolutely made the right call to replace it!
I also think that replacing it with the PzB 39 was the correct answer. This powerful, long-barreled, large gun just by itself sharpens the atmosphere of the entire model. Thanks for your comment.👍
Very fine work again, from an old Tamiya kit! I like the simple hack for creating track sag. We don't need expensive metal tracks! 😅😉 I look forward to seeing the painting and weathering.
People have different likes and dislikes. Many people hate the rubber-like belt-type tracks, but as an amateur modeler with little pocket money, I have no choice but to devise some way to make it look like it. It seems that there are many people who like that method, and I am very happy. Thanks for your comment.🍀
audio cables or speaker wire may be a better way to make the tow cables. some of them have vey thin strands of wire inside that may twist up more neatly. I mean the wire inside. would likely need the insulation stripped off.
Как всегда Ваши работы великолепны, мне очень нравится !!! Извиняюсь немного критики.......танкист в каске ??? Это что бы звон в самоходке StuG III Ausf.G отпугивал нечистую силу красных комиссаров ?
Just some questions. Do you think having the tarp in front of the commanders cupola is realistic? What would keep it in place? In battle I could easily see it interfering with closing the hatch and while traveling just blowing off. When having all of the equipment, towing cables, tarps, etc, mounted, could this interfere or make the painting of the vehicle more difficult? Love the work and your attention to detail.
The answer to the question is, "I made it that way because I wanted to." It is a world of hobby play. I think it's great that there are so many different perspectives and opinions. Thanks for your comment.🐷👍
@@Kautkas1 The link below is the product page of the German infantry set. www.tamiya.com/japan/products/35293/index.html However, I'd recommend the other, more recent infantry sets. I think the small wooden box is some sort of junk part. I don't remember the details.🍀
Классная работа! Смотрю ваш канал, так как сам занимаюсь моделизмом. Всегда увидишь что то новенькое! Тоже обожаю всякие штучки на броне танков, в кузове автомобиля, бревна, доски, ржавую проволоку, бочки, канистры, тряпки и так далее. Это придает модели реалистичность! И ни как не могу понять, из чего вы делаете брезент и защитную сетку? Если не секрет? Спасибо! Продвижения канала и успехов!
Брезентовый материал изготовлен из эпоксидной замазки, а сетка из кухонной ткани из марли. Ничего особенного я не использовал. Спасибо за ваш комментарий.🍺
Impressive work. A couple of things I noticed though: the helmets don't sit properly on the figures, and one of them at least is damaged on the right side. They look like if they were just posed o the top of the head, which makes the whole thing clumsy and a bit ridiculous. The Tarpaulins : a bit too many of them, and for which use? Also: the copper bits used to fix various parts seem to me a bit large, and the helmets on the side of the tank: how are they fixed ? A shame, because the project is definitely exciting. I liked the use of diluted putty to give some surfaces this rough look which could be seen in real life.
The part 1 video is unpainted as an assembly video. However, in order to efficiently proceed with the painting and weathering work in the Part 2 video, there are many parts that are temporarily attached with double-sided tape instead of being attached with adhesive.🐷
![StuG III and Armored Howitzer - Part 2 - 1/35 Tamiya - Tank Model - [ Painting - weathering ]](http://i.ytimg.com/vi/K6TKHT7T4Dw/mqdefault.jpg)
![StuG III and Armored Howitzer - Part 2 - 1/35 Tamiya - Tank Model - [ Painting - weathering ]](/img/tr.png)
![Nashorn on the Italian front - Part 2 - 1/35 TAMIYA - Tank Model - [ Painting - weathering ]](http://i.ytimg.com/vi/f09GUzeG5vs/mqdefault.jpg)
![#40 [戦車 プラモデル] タミヤ ヘッツァー製作記 組み立てから仕上げまで！Tank model making TAMIYA jagdpanzer 38(t) Hetzer](/img/n.gif)
Awesome build, can't wait for the painting video! Have a great weekend!
Thank you for your comment.🍀
The method of creating the track sag is great. Thanks for the tip!
This same kit will be my next purchase for sure. You did a fantastic job with this. Excellent!!!
I am happy to be of help. Thanks for your comment.🍺
Another great build video. You inspired my next Stug III build. 👍
I would be happy if you could help me. Thanks for your comment.🍺
Thanks for sharing. Have a nice Golden Week.
Thank you.🍎
I was going to gripe about the PzB 39 this late in the war but considering how that MG34 turned out I think you absolutely made the right call to replace it!
I also think that replacing it with the PzB 39 was the correct answer. This powerful, long-barreled, large gun just by itself sharpens the atmosphere of the entire model. Thanks for your comment.👍
Very fine work again, from an old Tamiya kit! I like the simple hack for creating track sag. We don't need expensive metal tracks! 😅😉 I look forward to seeing the painting and weathering.
People have different likes and dislikes. Many people hate the rubber-like belt-type tracks, but as an amateur modeler with little pocket money, I have no choice but to devise some way to make it look like it. It seems that there are many people who like that method, and I am very happy. Thanks for your comment.🍀
thanks for the video! once again you surprised me with your ideas, :D it looks great!
I'm glad you enjoyed it. Thanks for your comment.🍦🍦🍦
Amazing work as always 👌🏻
Thank you.🍀
Wow amazing build. Truly talented
Thank you.🍀
Ура! Новая классная сборка! Ждём покраски. Как всегда всё на высоте!
Вторая часть будет опубликована через две недели. Следите за обновлениями.🍺
Looks great man
Thank you.🍎
Another banger! Great job
Thank you.🍎
Cool. 👍
Thank you.👍
So satisfying!!!
Thank you.🍀
16:00 Amazing STug!
Thank you for your comment.🍰🍰🍰🫖☕
Thank you!
🍎🍏🍎
Nice and so good kit! See you soon!
Thank you.🐶
Best work I've ever seen ♥
Please do Pz.Kpfw II Ausf.L Luchs from Border Model
It's a tank with a small and humorous body. I would like to make it if I have the chance. I'll put it on my production candidate list.🍕
お疲れ様でした。相変わらず、載っている物の（フィギュアも含めて）チョイスがセンスいいです。これって、なかなｋ真似できないんですよね（笑）。
塗装が楽しみです。I can't wait.
ロシアとウクライナの戦争の影響だと思うのですが、どのショップでもフィギアーの在庫が激減しています。特に魅力的なものほど在庫切れと言った状況で、非常に困ってしまいます。様々な意味で、やはり平和が一番大事だと思ったりする今日この頃です。いつもコメントありがとうございます。😅
Love it! GREAT work!
Thank you.🍺
As usual a fantastic video. I hope that you can do a separate video of the painting of the figures.
I might make one someday if I get the chance. Thanks for your comment.🍺
I have the same kit in stash, your show will be invaluable...:)
It's an old kit, but you can enjoy it enough. Thanks for your comment.🍺
Very nice 👍👍
Thank you.🍰
😀😀👌👌👋👋 Great Work, Looks very Nice!!
Lange nicht gesehen. Ich freue mich, dass es Ihnen gut geht. Danke für deinen Kommentar.🍺
Good quality and details ❤❤❤
Thank you.🍎
TOP !!!!! 👍👍👍👍
🍺🍺🍺
👍👍👍
🍎🍎🍎
audio cables or speaker wire may be a better way to make the tow cables. some of them have vey thin strands of wire inside that may twist up more neatly.
I mean the wire inside. would likely need the insulation stripped off.
Thank you for your comment.🍔🍔🍔
Очень красиво
Спасибо.🍺
Классный штуг
Спасибо.🐶
👍
🐷👍
You should make a diorama for the king tiger at a checkpoint maybe? Just a suggestion
Thanks for your comment. But my channel does not produce dioramas. sorry.😅
@@smc-2 why not, I think it would be a great way to express your models?
@@pk_flvx Well, I might make one someday if I feel like it.🐷
@@smc-2 ok 😄
❤fantastisch gemacht.
Thank you.🍦🍦🍦
Как всегда Ваши работы великолепны, мне очень нравится !!! Извиняюсь немного критики.......танкист в каске ??? Это что бы звон в самоходке StuG III Ausf.G отпугивал нечистую силу красных комиссаров ?
Обычно он носит шапку, но также приготовлен шлем, и кажется, что он носил его во время боя.🍎
Just some questions. Do you think having the tarp in front of the commanders cupola is realistic? What would keep it in place? In battle I could easily see it interfering with closing the hatch and while traveling just blowing off. When having all of the equipment, towing cables, tarps, etc, mounted, could this interfere or make the painting of the vehicle more difficult? Love the work and your attention to detail.
The answer to the question is, "I made it that way because I wanted to." It is a world of hobby play. I think it's great that there are so many different perspectives and opinions. Thanks for your comment.🐷👍
Not realistic, but common in scale modelling to add life to the build, and to demonstrate method and talent.
@@ludaMerlin69 A simple and accurate comment. thank you.🍕🍺
Where you get so much canteens and helmets ? Good job
I bought Tamiya's German infantry set before. These are the parts that came with the kit.🐶
@@smc-2 Sorry for that stupid question but can you give me a that kit number?😊 And where you get that plastic wood box?
@@Kautkas1 The link below is the product page of the German infantry set.
www.tamiya.com/japan/products/35293/index.html
However, I'd recommend the other, more recent infantry sets.
I think the small wooden box is some sort of junk part. I don't remember the details.🍀
Awesome job where are those figures from ?
Soldiers from a Russian manufacturer (tank model).🍎🍏🍎
Классная работа! Смотрю ваш канал, так как сам занимаюсь моделизмом. Всегда увидишь что то новенькое! Тоже обожаю всякие штучки на броне танков, в кузове автомобиля, бревна, доски, ржавую проволоку, бочки, канистры, тряпки и так далее. Это придает модели реалистичность! И ни как не могу понять, из чего вы делаете брезент и защитную сетку? Если не секрет? Спасибо! Продвижения канала и успехов!
Брезентовый материал изготовлен из эпоксидной замазки, а сетка из кухонной ткани из марли. Ничего особенного я не использовал. Спасибо за ваш комментарий.🍺
Machinegun replacement barrel from soldier A is not necessary any more after changing the broken machine gun with an antitank rifle on soldier B 😉☝️
🍔🍔🍔🍺
🛵 I love German Army nitpickers. They know their stuff.
Awsome video! Just a short question. From where did you get those 2 figures? Its so hard to find them in any webshops :D
It's a Japanese shop.🍔
www.panzerlehr.jp/shopdetail/000000003838/ct41/page4/recommend/
By the way, we only have one left in stock.🍺
Thank you! :)
Impressive work. A couple of things I noticed though: the helmets don't sit properly on the figures, and one of them at least is damaged on the right side. They look like if they were just posed o the top of the head, which makes the whole thing clumsy and a bit ridiculous. The Tarpaulins : a bit too many of them, and for which use? Also: the copper bits used to fix various parts seem to me a bit large, and the helmets on the side of the tank: how are they fixed ? A shame, because the project is definitely exciting. I liked the use of diluted putty to give some surfaces this rough look which could be seen in real life.
Thank you for your comment.🍌🍌🍌
戦車ってドイツの戦車が多いですよね～
アメリカやイギリスもあるんですがアメリカイギリスに比べるとドイツが多いような気のせいですかね(^^ゞ
今回も素晴らしい出来です
格好いいです🎉😃
私が思うには、第二次世界大戦の冒頭では電撃戦戦術や戦車の運用によってドイツ軍は快進撃をみせました。この事が後々まで影響し、多種多様な様々な種類の戦車を開発する事となったのかも知れません。ヒットラー自身、戦車が好きだったのかも？ 誰か本当の正しい情報があれば教えていただきたいものです。👀
このキットが発売された当時、車体のサイズに大ショックを受けました！ わかります？
そのような話を以前微かに聞いた事はありますが、詳しいことは分かりません。よければ教えてください。🍎
@@smc-2 このキットが発売される前のタミヤのⅢ突のキットはモーターライズ可能でした、そのためサイズが2まわりほど大きかったのです! そのサイズが1/35だと思っていました。そのため新Ⅲ突を見た時余りにも小さくて驚きました! タミヤに騙されていた気分でしたw
@@superhard9582 なるほど、そうでしたか。タミヤが始めた1/35シリーズ。開始当初は、それなりに色々問題点もあったと言うことですね、面白いお話です。教えてくれてありがとうございます。🍔🍺
When will pt2 come
I don't have a concrete plan, but I think I will make it someday. Thanks for your comment.🍕🍺
Ok hopefully soon I love your videos
after part 2 of the stug can you make a japenese tank pls. its up to you
Unfortunately, my next post will be the T-34/85 from RFM recreating the Tank Descente. Stay tuned.🍎
@@smc-2 i sometimes eat apples. cant wait
Are you ever gonna build cold war or modern armour?
I may make one someday. Thanks for your comment.🐶
Добрый день!Если в планах построить Stug 3 finnish army (Tamya 35310)?
Выглядит интересным комплектом, но планов по его созданию нет. Спасибо за ваш комментарий.🐷
All good.only the figure helmets are not good!
Thank you for your comment.🍰🍰🍰
昔レジンキットを買ったことがありますが2箇所破損してました。
高価な割に品質がともなわないのにはがっかりです。
塗装編を楽しみにしています。
おっしゃる通りで、このメーカーは全体に造形の荒さも目立ちます。しかしフィギアーが作り出す状況というか、シチュエーションというか、ポーズというか、そう言った他のメーカーではあまり見られない不思議な面白さと魅力を持ち合わせているのもまた事実かも知れません。色々と悩ましい所ですが、質の荒さに目をつぶりつつ、どうしても手を出したくなる事が度々です。コメントありがとう。👀
Hello mr. Club.hey!that would be a nice piggy bank.with steady sticky greetings your modellmate.christian
Thank you for your comment.🍷🍷🍷
money okay? It seems that if you break money or stick it together, you'll get caught...
???
Don't worry. It's okay.😅
良かったです
プラモデル造り続けるのはしんどいと思いますけど頑張ってください
@@プラモ好き-m4p 結構大変だけど、面白さの方が勝るかな。楽しいから続いているのだと思います。コメントありがとう。🍺
完成が楽しみです(≧Д≦)
パート2は2週間後です。お楽しみに。🐱
يعني مو مره يعني
？？？🍺
Откуда у вас русские фигурки?)
www.panzerlehr.jp/shopbrand/ct41/page6/recommend/
Японский магазин масштабных моделей.🍰
Why would you add all that detail without painting it first, makes no sense at all, just makes all the painting more difficult.
The part 1 video is unpainted as an assembly video. However, in order to efficiently proceed with the painting and weathering work in the Part 2 video, there are many parts that are temporarily attached with double-sided tape instead of being attached with adhesive.🐷
👍🏻
🐶🐷🍺